Product Overview
The Lasika W-H9004 is a digital sport watch designed for men, featuring a round dial, rubber band, and various timekeeping functions. This manual provides instructions for its setup, operation, and maintenance.

Figure 1: Front view of the Lasika W-H9004 Sport Watch. The watch features a black case with green accents. The digital display shows the time '10:10'. Buttons are visible on the left ('LIGHT', 'MODE') and right ('START', 'RESET') sides of the watch face. The brand 'LASIKA' and model 'W-H9004' are visible on the dial.
Button Functions
- LIGHT: Activates the backlight for illumination. (Top-left button)
- MODE: Cycles through different modes (Time, Alarm, Stopwatch). (Bottom-left button)
- START: Used to start/stop functions in Stopwatch mode or adjust settings. (Top-right button)
- RESET: Used to reset functions or confirm settings. (Bottom-right button)
Setup
Initial Time Setting
- From the Time Mode display, press the MODE button repeatedly until the seconds begin to flash. This indicates the watch is in setting mode.
- Press the RESET button to cycle through the setting options: seconds, hour, minute, month, date, day of the week.
- Use the START button to adjust the flashing value. Hold START to increase values rapidly.
- Once all desired settings are adjusted, press the MODE button to exit the setting mode and return to the normal Time Mode display.
Operating Instructions
Time Mode
- This is the default display mode, showing the current time, day, and date.
- Press the LIGHT button to illuminate the display in low-light conditions.
Alarm Mode
- Press the MODE button once from Time Mode to enter Alarm Mode. The alarm time will be displayed.
- To set the alarm, press the RESET button. The hour digits will flash.
- Use the START button to adjust the hour.
- Press RESET again to select the minute digits, then use START to adjust.
- Press MODE to exit alarm setting.
- To turn the alarm ON/OFF, press the START button while in Alarm Mode (not setting mode). An alarm icon will appear/disappear.
Stopwatch Mode
- Press the MODE button twice from Time Mode to enter Stopwatch Mode. The display will show '00:00:00'.
- Press the START button to begin timing.
- Press START again to pause timing.
- Press the RESET button while paused to reset the stopwatch to zero.
- Press MODE to exit Stopwatch Mode.
Maintenance
Cleaning
To clean your watch, wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners, as they may damage the watch's finish or rubber components.
Battery Replacement
When the display becomes dim or the backlight function weakens, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance. Attempting to replace the battery yourself may void any warranty and compromise the watch's integrity.
Water Resistance
This watch is designed with a degree of water resistance suitable for daily use, such as splashes or brief immersion. However, it is not suitable for swimming, diving, or prolonged exposure to water. Avoid operating buttons while the watch is wet to prevent water ingress.
Troubleshooting
Common Issues and Solutions
- Display is blank or dim: The battery may be low or depleted. Refer to the 'Battery Replacement' section.
- Time is incorrect: The watch may need to be reset or the time adjusted. Follow the 'Initial Time Setting' instructions.
- Buttons are unresponsive: Ensure the watch is not wet. If the issue persists, a reset may be required (consult a technician if a simple reset doesn't work).
- Alarm does not sound: Verify that the alarm is set correctly and the alarm icon is displayed in Alarm Mode.
Specifications
- Brand: Lasika
- Model: W-H9004
- Display Type: Digital
- Watch Shape: Round
- Dial Case Diameter: Approximately 30 millimeters
- Band Material: Rubber
- Targeted Group: Men
Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the retailer from whom the watch was acquired. Keep your proof of purchase for any warranty claims.