Introduction
The Stealth ECVP01 is an all-in-one cordless wet dry vacuum cleaner and mop designed for efficient cleaning of various floor surfaces, including hard floors and area rugs. It features self-cleaning capabilities, a detachable battery, an LCD display, and voice prompts for user convenience.
What's Included
Upon unboxing, please ensure all components are present:
- Wet Dry Vacuum Cleaner and Mop x 1
- Rolling Brush x 1
- Hard Floor Brush x 1
- Battery Pack x 1
- 110-240V Adapter x 1
- Docking Station x 1
- Dry Tray x 1
- HEPA Filter x 1
- HEPA Cleaning Brush x 1
- Cleaning Kit x 1
- User Manual x 1 (This document)
- Warranty Card x 1
Image: The Stealth ECVP01 vacuum cleaner with all its included accessories laid out, including the main unit, various brushes, battery, adapter, docking station, and cleaning tools.
Setup
- Assembly: Connect the handle to the main body of the vacuum cleaner until it clicks into place.
- Battery Installation: Insert the fully charged battery pack into its designated slot on the main unit.
- Charging: Place the vacuum cleaner on the docking station and connect the 110-240V adapter. Ensure the charging indicator light illuminates. A full charge takes approximately 28 minutes.
- Fill Clean Water Tank: Remove the clean water tank (680ml capacity) and fill it with clean water. For enhanced cleaning, a suitable floor cleaning solution can be added as per solution manufacturer's instructions. Reattach the tank securely.
- Initial Brush Installation: Select the appropriate brush (rolling brush for general use or hard floor brush for specific surfaces) and install it into the brush head.
Image: The detachable battery pack being charged separately, and the vacuum cleaner charging on its docking station, illustrating flexible charging options.
Operating Instructions
Power On/Off and Mode Selection
Press the power button to turn the unit on. The LCD display will activate, showing battery status, working time, and current mode. Toggle between ECO Mode and Max Mode using the dedicated switch for varying cleaning intensity.
Image: A hand pressing the power button on the handle, highlighting the ECO/MAX mode switch and the spraying button for one-click operation.
Cleaning Operation
The Stealth ECVP01 is designed for multi-surface cleaning. It vacuums and washes simultaneously. For wet cleaning, press the spraying button on the handle to dispense clean water onto the floor. The self-propelled design assists in easy maneuverability.
Image: The vacuum cleaner cleaning various surfaces, including hard floors and carpets, demonstrating its versatility in picking up debris and liquid spills.
Two-Tank Technology
The device utilizes a two-tank system to ensure you always clean with fresh water. The clean water tank supplies fresh solution, while the dirty water tank (450ml capacity) collects dirty water and debris. This prevents cross-contamination.
Image: A diagram illustrating the two-tank system, showing the clean water tank (680ml) and the dirty water tank (450ml) on the vacuum cleaner.
Voice Assistant and LCD Display
The integrated voice assistant provides helpful prompts for operation, such as when the dirty water tank is full or the clean water tank is empty. The LCD display offers visual feedback on battery level, working mode, and alerts.
Image: A close-up of the LCD display showing battery indicator, working time, ECO mode, Max mode, and icons for "Clean Water Tank is Short of Water" and "Dirty Water Tank is Full".
Image: The vacuum cleaner's top section with the LCD display and a visual representation of voice prompts like "Start self-cleaning" and "Please clean dirty water tank to avoid getting stinky."
To enable or disable voice prompts, simply press and hold the voice alert button for three seconds.
Image: The vacuum cleaner in action on a wet floor, with an overlay indicating the voice alert feature and instructions to enable/disable it.
Maintenance
Self-Cleaning Function
After each use, place the vacuum cleaner on its docking station and press the self-cleaning button. The unit will perform a 60-second self-cleaning cycle, washing the roller brush and internal pathways. This helps prevent odors and maintains cleaning efficiency.
Image: A finger pressing the self-cleaning button on the vacuum cleaner while it is docked, indicating the one-touch self-cleaning feature.
Image: The vacuum cleaner docked and connected to power, with an inset showing water flowing through the brush head during the self-cleaning cycle.
Tank Cleaning
Regularly empty and rinse the dirty water tank to prevent buildup and odors. The clean water tank should also be rinsed periodically. Ensure both tanks are completely dry before reattaching them to the unit.
Image: A close-up of the dirty water tank, showing the collected dirty water and debris, emphasizing the need for regular emptying.
HEPA Filter Maintenance
The HEPA filter should be cleaned regularly using the provided HEPA cleaning brush. Tap off loose debris and rinse under running water if necessary. Allow the filter to air dry completely for at least 24 hours before reinstallation to maintain optimal suction and filtration.
Image: A close-up of the HEPA filter, highlighting its design and the importance of regular cleaning for effective air filtration.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Battery not charged or not properly installed. | Ensure battery is fully charged and correctly inserted. Check power adapter connection to docking station. |
| "Empty dirty water tank" voice prompt persists after emptying. | Dirty water tank sensor may be wet or obstructed. | Thoroughly dry the dirty water tank and the sensor area on the main unit. Ensure no debris is blocking the sensor. If the issue persists, contact customer support. |
| Poor suction or cleaning performance. | Dirty water tank full, clean water tank empty, clogged filter, or tangled brush. | Empty dirty water tank, refill clean water tank, clean HEPA filter, and remove any hair or debris from the roller brush. |
| Unit is excessively loud. | Normal operation noise, or potential obstruction in the brush roll/air path. | Some noise is normal for powerful cleaning. Check for any foreign objects or debris caught in the brush roll or suction path. |
Specifications
- Model Name: All in One Wet Dry Vacuum Cleaner and Mop
- Model Number: ECVP01
- Brand: Stealth
- Color: Gray
- Special Features: Smart Voice Assistant, LCD Display, Self Cleaning Function, Long Runtime, Detachable Rechargeable Battery
- Filter Type: HEPA Filter
- Power: 150 Watts
- Runtime: Up to 30 minutes
- Charging Time: 28 minutes
- Clean Water Tank Capacity: 680ml
- Dirty Water Tank Capacity: 450ml
- Noise Level: 80 dB
- Product Dimensions: 26.18"L x 12.4"W x 12.6"H
- Item Weight: 9.48 pounds
- Battery Type: Lithium-Ion (1 required, included)
- Recommended Uses: Hard Floor, Tile, Carpet, Home
- Indoor/Outdoor Usage: Indoor
- UPC: 810018924324
- Manufacturer: Alton Industry
- Country of Origin: China
Warranty and Support
The Stealth ECVP01 comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided on your Warranty Card or visit the official Stealth website. You can also find additional resources and FAQs on the Stealth Store on Amazon.
For a downloadable PDF version of the user manual, please visit: User Manual (PDF)
