1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT EN1 Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.
Safety Warnings
- Do not exceed the maximum weight recommendation of 176 pounds (80 kg).
- Ensure proper assembly and stability to avoid tipping.
- Use the electric height adjustment system carefully to maintain a safe working environment.
- Keep children and pets away from the desk during operation.
- Ensure no obstacles are in the desk's path during height adjustments.
2. Package Contents
Verify that all components are present before beginning assembly. Refer to the assembly video for visual guidance.
Video: FLEXISPOT Standing Desk Frame Installation Guide. This video provides a visual guide to the assembly process, including identifying all parts.
The package typically includes:
- Desktop (One-piece, 48x24 inches, Black)
- Desk Frame (Silver)
- Lifting Columns
- Crossbeam
- Desk Feet
- Motor with Keypad
- Power Plug
- Supporting Plates
- Transmission Rod
- Coupling
- Spanner
- Hooks (x2)
- Assembly Hardware (Screws, Allen wrench)
Image: Overview of the FLEXISPOT EN1 Electric Standing Desk, showing the assembled unit with a black desktop and silver frame, along with typical office items.
3. Setup and Assembly
Follow these steps carefully for proper assembly. It is recommended to have two people for certain steps.
- Insert the Coupling into the Motor: Carefully insert the coupling into the motor. Ensure correct orientation as shown in the assembly video.
- Insert the Motor and Right Column: Attach the motor assembly to the right lifting column.
- Install the Crossbeam: Connect the crossbeam between the two lifting columns. Align the protrusions with the holes and secure with screws.
- Install the Support Plates: Attach the support plates to the top of the lifting columns.
- Install the Desk Feet: Secure the desk feet to the bottom of the lifting columns.
- Adjust the Crossbeam: Loosen the crossbeam screws, adjust the width to fit the desktop, and then tighten.
- Install the Table Board: Carefully place the desktop onto the assembled frame. Secure it using the provided screws. Pre-drilling pilot holes may be necessary if not already present.
- Install the Transmission Rod: Insert the transmission rod, connecting the motor to the left lifting column. Tighten the nuts securely.
- Install the Keypad: Mount the control keypad to the underside of the desktop using the provided screws.
- Install the Hooks: Attach the accessory hooks to the underside of the desktop as desired.
- Connect Cables: Connect all motor and control panel cables to the power supply and then plug into a power outlet. Ensure cables are neatly managed to avoid snagging during height adjustments.
Image: Illustration of the desk components packaged in two separate boxes, one for the desktop and one for the frame, highlighting that they may arrive at different times.
4. Operating Instructions
Your FLEXISPOT EN1 desk features an electric lift system for smooth height adjustments and memory presets for convenience.
Height Adjustment
Use the Up (▲) and Down (▼) arrow buttons on the control panel to manually adjust the desk height. The desk can be adjusted from a minimum height of 27.6 inches to a maximum height of 45.7 inches (excluding the 1-inch desktop thickness). The motor operates quietly, with noise levels below 50 dB.
Image: Detailed view of the programmable control panel, illustrating the buttons for height adjustment and memory presets.
Memory Presets
The control panel features 4 memory preset buttons (1, 2, 3, 4) to store and recall your preferred sitting and standing heights.
- Adjust the desk to your desired height using the Up/Down buttons.
- Press and hold one of the memory preset buttons (1, 2, 3, or 4) until the display flashes or a beep is heard. This saves the current height to that preset.
- To recall a saved height, simply press the corresponding memory preset button. The desk will automatically move to the saved position.
Video: FLEXISPOT Standing Desk in operation, demonstrating the smooth electric height adjustment and use of memory presets.
5. Maintenance
To ensure the longevity and optimal performance of your FLEXISPOT EN1 desk, follow these maintenance guidelines:
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Cable Management: Regularly check and organize cables to prevent tangling or damage, especially during height adjustments.
- Lubrication: The lifting mechanism is designed for maintenance-free operation. Do not attempt to lubricate internal components.
- Inspection: Periodically inspect all screws and connections to ensure they are tight. Tighten any loose fasteners.
- Weight Capacity: Do not exceed the maximum weight capacity of 176 lbs (80 kg) to prevent damage to the motor and frame.
6. Troubleshooting
If you encounter any issues with your FLEXISPOT EN1 desk, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected, motor cable disconnected, overload. | Check all cable connections. Reduce weight on the desk. Reset the system by unplugging for 30 seconds and plugging back in. |
| Desk moves unevenly or makes unusual noises. | Loose screws, uneven weight distribution, internal mechanism issue. | Tighten all assembly screws. Redistribute weight evenly on the desktop. If the issue persists, contact customer support. |
| Memory presets are not working. | Presets not saved correctly. | Re-save your desired heights by adjusting the desk and then pressing and holding the preset button until confirmed. |
| Desk stops mid-movement. | Overload protection activated, obstruction. | Remove some weight from the desk. Check for any obstructions under or around the desk. Wait a few minutes for the motor to cool down if it was overloaded. |
If these steps do not resolve the issue, please contact FLEXISPOT customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | FLEXISPOT |
| Model Number | EC1S4824B |
| Product Dimensions | 24"D x 48"W x 47.6"H |
| Desktop Size | 48"W x 24"D |
| Desktop Thickness | 1 Inch |
| Desktop Material | Engineered Wood |
| Desktop Color | Black |
| Frame Material | Alloy Steel |
| Frame Color | Silver |
| Height Adjustment Range | 28.1" to 45.7" (without 1" desktop thickness) |
| Lifting Mechanism | Electric |
| Memory Presets | 4 |
| Maximum Weight Capacity | 176 Pounds (80 kg) |
| Noise Level | Below 50 dB |
| Assembly Required | Yes |
| UPC | 810072797476 |
8. Warranty and Support
Warranty Information
This FLEXISPOT EN1 Electric Standing Desk comes with a Limited Warranty. Please refer to the warranty card included in your package or visit the official FLEXISPOT website for detailed terms and conditions.
Customer Support
For any questions regarding assembly, operation, troubleshooting, or warranty claims, please contact FLEXISPOT customer support. Contact information can typically be found on the product packaging, the official FLEXISPOT website, or through your retailer.
A detailed sit stand desk installation video has been uploaded for reference. Assembly tools and detailed instructions are included in the package. Please do not hesitate to contact us with any questions during assembly and use.
