AT&T CL83519 DECT 6.0 5-Handset Answering System with Smart Call Block User Manual

1. Introduction

This manual provides essential information for the AT&T CL83519 DECT 6.0 5-Handset Answering System. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance of your telephone system.

The AT&T CL83519 system is designed for ease of use, featuring DECT 6.0 digital technology for clear communication and extended range. Key functionalities include a digital answering system, Smart Call Blocker, Caller ID announce, and push-to-talk capabilities.

AT&T CL83519 5-Handset Answering System with base unit and four cordless handsets

Image 1.1: The AT&T CL83519 system, showing the main base unit and five cordless handsets.

2. Setup Guide

Follow these steps to set up your AT&T CL83519 telephone system.

2.1 Package Contents

Main base unit
Five cordless handsets
Five charging cradles for handsets
Power adapters for base unit and charging cradles
Telephone line cord
Rechargeable AA batteries (5 included, one for each handset)

2.2 Battery Installation and Charging

Open the battery compartment cover on the back of each handset.
Insert the provided AA rechargeable battery, observing the polarity markings (+ and -).
Close the battery compartment cover.
Place each handset into its respective charging cradle. Ensure the "CHARGE" indicator on the handset lights up.
Allow handsets to charge for at least 16 hours before initial use to ensure full battery capacity.

Note: Only use the provided rechargeable batteries or equivalent replacements. Non-rechargeable batteries may damage the handset.

2.3 Connecting the Base Unit

Connect one end of the telephone line cord to the TEL LINE jack on the back of the base unit.
Connect the other end of the telephone line cord to a telephone wall jack.
Plug the base unit's power adapter into the POWER jack on the back of the base unit.
Plug the other end of the power adapter into an electrical outlet that is not controlled by a wall switch.
For each charging cradle, plug its power adapter into an electrical outlet.

Important: Use only the power adapters provided with this product. Using other adapters may cause damage.

3. Operating Instructions

This section details the primary functions and features of your AT&T CL83519 telephone system.

3.1 Basic Phone Functions

Making a Call: Press TALK/FLASH or SPEAKER, then dial the number.
Answering a Call: Press TALK/FLASH or SPEAKER when the phone rings.
Ending a Call: Press OFF/CLEAR or place the handset in the charging cradle.
Volume Control: Use the VOL buttons on the side of the handset or the base unit to adjust call volume.

3.2 Smart Call Blocker

The Smart Call Blocker feature helps screen and block unwanted calls, including robocalls. It includes a directory for up to 1,000 names and numbers.

Blocking a Number: During a call or from Caller ID history, press the CALL BLOCK button to add the number to your block list.
Screening Calls: The system can be set to screen unknown numbers, prompting callers to announce their name before connecting.
Managing Block List: Access the Smart Call Block menu to review, add, or remove numbers from your block list.

AT&T CL83519 system highlighting Smart Call Blocker and other features

Image 3.1: The AT&T CL83519 base unit and handset, illustrating the Smart Call Blocker feature and other key functions.

3.3 Digital Answering System

The integrated digital answering system can record up to 22 minutes of messages, including incoming messages, outgoing announcements, and memos.

Playing Messages: Press PLAY/STOP on the base unit or access the Answering System menu on a handset.
Recording an Announcement: Follow the menu prompts on the handset or base unit to record a personalized outgoing announcement.
Deleting Messages: Press DELETE during message playback or through the menu.

3.4 Caller ID and Call Waiting

The system displays the caller's name and number (if available) and announces the caller's name. It stores up to 50 caller ID entries.

Reviewing Caller ID History: Press CID or DIR to scroll through the list.
Calling Back: Select an entry from the Caller ID history and press TALK/FLASH.
Call Waiting: If you subscribe to call waiting service, a tone will indicate an incoming call while you are on the phone. Press TALK/FLASH to switch to the new call.

3.5 Push-to-Talk (PTT)

Use the Push-to-Talk feature for instant, two-way communication between handsets, similar to a walkie-talkie.

Press and hold the PTT button on a handset.
Select the desired handset to communicate with.
Speak into the handset. Release PTT to listen.

3.6 Speed Dial

Program up to 9 frequently called numbers for quick dialing.

Programming: Access the menu, navigate to Speed Dial settings, and follow prompts to store numbers.
Dialing: Press and hold the corresponding speed dial key (1-9) on the handset.

3.7 Expanding Your System

The AT&T CL83519 system is expandable up to 12 handsets. You can add accessory handsets (model CL80119) to your system.

Refer to the instructions included with the CL80119 accessory handset for registration procedures.

4. Maintenance

Proper care ensures the longevity and optimal performance of your telephone system.

4.1 Battery Care

Always use the specified rechargeable AA batteries.
Ensure handsets are placed in their charging cradles when not in use to maintain battery charge.
If a handset will be unused for an extended period, remove the battery to prevent leakage.
Dispose of old batteries responsibly according to local regulations.

4.2 Cleaning

Clean the telephone system with a soft, slightly damp cloth.
Do not use cleaning sprays or liquid cleaners, as they may damage the finish or electrical components.
Avoid exposing the units to excessive moisture, dust, or direct sunlight.

5. Troubleshooting

If you experience issues with your AT&T CL83519 system, refer to the following common problems and solutions.

Problem	Solution
No dial tone.	Ensure the base unit's power adapter is securely plugged into an electrical outlet and the telephone line cord is connected to a wall jack. Check if the handset batteries are charged. Try plugging a different phone into the wall jack to confirm the line is active.
Cannot make or receive calls.	Verify the telephone line cord is properly connected. Ensure the handset is within range of the base unit. Check if the line is in use by another phone on the same line.
Poor audio quality or static.	Move the handset closer to the base unit. Avoid placing the base unit near other electronic devices (e.g., microwaves, Wi-Fi routers) that may cause interference. Check for loose connections.
Smart Call Blocker not working as expected.	Ensure the Smart Call Blocker feature is enabled in the menu settings. Verify that the numbers you wish to block are correctly added to the block list. Review the screening options to ensure they match your preferences.
Answering system not recording messages.	Check if the answering system is turned ON. Ensure there is sufficient recording time available (up to 22 minutes). Verify that the outgoing announcement is properly recorded.

5.1 System Reset

If problems persist, try resetting the system:

Unplug the power adapter from the base unit.
Remove the batteries from all handsets.
Wait for approximately 15 seconds.
Plug the base unit's power adapter back in.
Reinsert the batteries into the handsets.
Place the handsets back into their charging cradles.

6. Specifications

Model: CL83519
Technology: DECT 6.0 Digital
Handsets Included: 5
Expandability: Up to 12 handsets (using CL80119 accessory handsets)
Answering System: Digital, up to 22 minutes recording time
Smart Call Block Directory: 1,000 name and number capacity
Caller ID History: 50 name and number capacity
Speed Dial: 9 number capacity
Batteries: 5 AA rechargeable batteries (included)
Material: Plastic
Color: Black, Silver
Product Dimensions (Base Unit): Approximately 6.69 x 3.54 x 7.08 inches
Item Weight: Approximately 4.03 pounds (total system)

7. Warranty and Support

7.1 Warranty Information

Warranty details for the AT&T CL83519 system are typically provided in the product packaging or can be found on the official AT&T website. Please retain your purchase receipt as proof of purchase for warranty claims.

7.2 Customer Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official AT&T customer support website or refer to the contact information provided in your product's original documentation.

You can often find support resources, FAQs, and contact details by searching for "AT&T customer support" online.

	AT&T Smart Call Blocker BL102 Series User Guide Learn how to use the AT&T Smart Call Blocker on your BL102 series DECT 6.0 cordless telephone and answering system to filter robocalls and unwanted calls. This guide covers setup, directory management, block lists, allow lists, and star name lists for effective call screening.
	AT&T AT3101 Expansion DECT 6.0 Cordless Handset User Manual User manual for the AT&T AT3101 Expansion DECT 6.0 cordless handset, covering installation, operation, troubleshooting, safety, and warranty information. Designed for use with the AT&T AT3111-2 telephone system.
	AT&T Smart Call Blocker Guide Learn how to set up and use the AT&T Smart Call Blocker to filter unwanted calls, including robocalls and telemarketers, while allowing important calls from family, friends, and businesses.
	AT&T Smart Call Blocker DL72119 User Guide Guide to using the AT&T Smart Call Blocker feature on DL72119/DL72219/DL72319/DL72419/DL72519/DL72539/DL72549 DECT 6.0 cordless telephones. Learn how to screen robocalls and unwanted calls, set up allow and block lists, and manage call screening preferences.
	AT&T Smart Call Blocker: Setup and Usage Guide (Canada Version) Learn how to use the AT&T Smart Call Blocker feature on your DECT 6.0 cordless telephone system. This guide explains setup, call screening profiles, managing contacts, and blocking unwanted calls.
	AT&T Smart Call Blocker CL82219/CL82229/CL82319/CL82419/CL82519 User Guide User guide for the AT&T Smart Call Blocker feature on DECT 6.0 cordless telephone systems. Learn to filter robocalls, manage call lists (Directory, Allow, Block, Star Name), and configure screening profiles like 'Screen Robot' and 'Screen Unknown'.

AT&T CL83519