1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your iDOO Hydroponics Growing System. Please read this manual thoroughly before using the product to ensure proper function and longevity. This system is designed for indoor cultivation of herbs, vegetables, and small fruits, offering an efficient method for plant growth without soil.
Image 1.1: The iDOO Hydroponics Growing System with mature plants.
2. Safety Information
- Ensure the power adapter is connected to a suitable electrical outlet (100-120V, 60Hz).
- Do not immerse the main unit or power adapter in water or other liquids.
- Keep the system away from heat sources and direct sunlight to prevent overheating.
- This product is intended for indoor use only.
- Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
- Keep out of reach of children and pets.
3. Package Contents
Verify that all components are present in the package:
- Hydroponics Growing System Base with Water Tank
- LED Grow Light Panel with Adjustable Pole
- Seed Pods/Sponges (Quantity may vary)
- Grow Domes
- Plant Food (Nutrient A & B)
- Power Adapter
- User Manual
- Plant Labels
4. Product Overview and Components
The iDOO Hydroponics Growing System consists of a water reservoir, a pump for water circulation, a planting deck with holes for seed pods, and an adjustable LED grow light. The system is designed for ease of use and efficient plant growth.
Image 4.1: Product dimensions and key components. The system measures approximately 15.75 inches wide, 8.27 inches deep, and up to 15 inches high with the light extended.
5. Setup Instructions
Follow these steps for initial setup:
- Unpack Components: Carefully remove all items from the packaging.
- Assemble the System: Insert the adjustable light pole into the base unit. Ensure it is securely seated.
- Add Water: Fill the water tank with clean water up to the 'Max' line indicated on the water level window. The tank capacity is 4.5 liters.
- Add Plant Food: Refer to the plant food instructions for the correct ratio of Nutrient A and Nutrient B to add to the water. Mix thoroughly.
- Insert Seed Pods: Place your desired seeds into the provided seed pods/sponges. Insert the prepared pods into the planting holes on the deck. Cover with grow domes for initial germination.
- Connect Power: Plug the power adapter into the system and then into a wall outlet.
- Power On: Press the power button to turn on the system. The grow lights will activate according to the automatic timer.
Image 5.1: Lowering the LED grow light into the base.
Image 5.2: Adding water to the system.
Image 5.3: Adding liquid plant food.
Image 5.4: Placing a seed pod.
Image 5.5: Seedling covered with a grow dome.
Image 5.6: Pressing the power button.
6. Operating Instructions
The iDOO Hydroponics Growing System features an automatic timer for the LED grow lights and a water pump system to ensure optimal plant growth.
6.1. Grow Light Modes
The system offers two distinct light modes tailored for different plant types:
- Vegetables Mode: Utilizes red, blue, far-red, and white lights. This mode promotes germination, leaf growth, and overall vegetative development. Ideal for leafy greens like lettuce, basil, and mint.
- Flowers & Fruits Mode: Incorporates red, far-red, and white lights. This mode is designed to boost blooming and fruit production. Suitable for flowering plants and fruiting vegetables such as strawberries or small tomatoes.
Image 6.1: Visual representation of the two grow light modes and their respective light spectrums.
Image 6.2: Veggies Mode, suitable for leafy plants.
Image 6.3: Flower & Fruit Mode, suitable for flowering and fruiting plants.
6.2. Automatic Timer
The LED grow lights operate on an automatic 18-hour on, 6-hour off cycle. The cycle begins when the system is first powered on. No manual adjustment is required for the timer.
6.3. Water Pump System
The integrated water pump circulates water and nutrients to the plant roots. This system operates quietly and ensures consistent hydration. The 4.5L water tank supports plant growth for approximately 3-4 weeks before refilling is typically needed.
Image 6.4: Automatic water pump system and visible water level window.
6.4. Plant Labels
Use the provided plant labels to identify your growing plants. This helps in tracking different varieties and their growth stages.
Image 6.5: Using plant labels.
7. Maintenance
7.1. Water Refill and Change
Monitor the water level through the visible window. When the water level is low, refill the tank with fresh water and plant food solution. It is recommended to completely change the water and clean the reservoir every 2-4 weeks, depending on plant growth and water clarity.
Image 7.1: Draining water from the system.
7.2. Cleaning the System
Periodically clean the water tank and pump to prevent algae growth and ensure optimal performance. Use a soft brush or cloth and mild soap, then rinse thoroughly. Ensure all soap residue is removed before refilling with water and nutrients.
7.3. Light Height Adjustment
Adjust the height of the LED grow light as your plants grow. The light should be positioned a few inches above the tallest plants to provide adequate light intensity without causing heat stress. The light pole is adjustable up to 15 inches.
7.4. Transplanting
When plants outgrow the system or require more space, they can be transplanted. The seed pods facilitate easy transplanting to soil or larger hydroponic systems, promoting higher survival rates.
Image 7.2: Germination and transplanting process.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Plants not growing or slow growth | Insufficient nutrients, incorrect light mode, old seeds, improper water level. | Check nutrient levels and add if necessary. Ensure correct light mode is selected. Use fresh seeds. Maintain optimal water level. |
| Algae growth in water tank | Excess light exposure to water, high water temperature. | Clean the tank thoroughly. Ensure seed pod covers are in place to block light. Consider placing the system in a cooler area. |
| Pump not working | Clogged pump, power issue, pump malfunction. | Unplug and clean the pump. Check power connection. If issues persist, contact customer support. |
| Lights not turning on | Power adapter disconnected, light cycle in off period, LED malfunction. | Check power connections. Verify if the system is in its 6-hour off cycle. If still not working, contact customer support. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | UK-ID-IG303-BK |
| Brand | iDOO |
| Color | Brown |
| Product Dimensions | 8.27"D x 15.75"W x 4.72"H |
| Item Weight | 4.33 pounds (1.97 Kilograms) |
| Capacity | 4.5 Liters |
| Number of Pods | 5 |
| Light Type | Full Spectrum LED Grow Lights (24-Watt) |
| Light Cycle | 18 hours ON / 6 hours OFF (Automatic) |
| Voltage/Frequency | 100-120 Volts, 60 Hertz |
| Indoor/Outdoor Usage | Indoor |
10. Warranty and Support
iDOO products are manufactured to high-quality standards. For warranty information, product support, or to report any issues, please refer to the contact information provided with your purchase or visit the official iDOO website. Please have your model number (UK-ID-IG303-BK) available when contacting support.
