Introduction
The PEPE Mobility 4-Inch Raised Toilet Seat with Lid is designed to provide enhanced comfort and safety for individuals who experience difficulty sitting down or standing up from a standard toilet. This includes elderly individuals, those recovering from hip or knee surgery, or anyone with reduced mobility. By elevating the toilet seat, it reduces strain on joints and promotes greater independence in daily living.
Image: The PEPE Mobility 4-Inch Raised Toilet Seat with Lid, shown installed on a standard toilet, providing an elevated seating surface.
Product Contents
Your PEPE Mobility Raised Toilet Seat package includes the following items:
- 1 x PEPE Mobility 4-Inch Raised Toilet Seat with Lid
- Adjustable side anchorages (pre-attached)
- Instruction Manual
Compatibility & Dimensions
This raised toilet seat is designed to be compatible with most standard round and elongated toilets. To ensure proper fit, please verify your toilet's dimensions against the following requirements:
- Toilet width (C): Between 12.5 inches and 15 inches.
- Distance from front to back (A): Greater than 10.8 inches.
- Inner width (B): Greater than 8.5 inches.
Image: A diagram illustrating the key dimensions (A, B, C) of a toilet bowl to check for compatibility with the raised toilet seat. Ensure your toilet meets these measurements for a secure fit.
The raised toilet seat adds approximately 4 inches (10 cm) to the height of your toilet.
Image: A side profile of the PEPE Mobility Raised Toilet Seat, highlighting its 4-inch elevation.
Installation Instructions
- Prepare the Toilet: Ensure your existing toilet seat and bowl are clean and dry before installation.
- Position the Riser: Place the PEPE Mobility Raised Toilet Seat directly onto your existing toilet bowl.
- Secure the Anchorages: The seat features two lateral dimmable anchorages. Adjust these by turning the knobs until they firmly grip the sides of your toilet bowl. This ensures stability and prevents unwanted movement.
- Verify Stability: Gently test the seat to ensure it is securely attached and does not shift or slip.
Image: A close-up view of the adjustable knob on the side anchorage, used to secure the raised toilet seat to the toilet bowl.
Image: The underside of the raised toilet seat, illustrating the adjustable clamps that provide a secure fit to various toilet bowl shapes.
Installation Video Guide
Video: Official PEPE Mobility installation guide for the 4-inch toilet riser with lid. This video demonstrates the step-by-step process of attaching the raised toilet seat securely to your toilet bowl.
Operating Instructions
Once installed, the PEPE Mobility Raised Toilet Seat functions like a standard toilet seat, but with the added height for easier access. The integrated lid can be lifted and lowered as needed.
Image: A hand lifting the lid of the PEPE Mobility Raised Toilet Seat, demonstrating its functional design.
Cleaning & Maintenance
Regular cleaning is essential to maintain hygiene and prolong the life of your raised toilet seat. The smooth, resistant material makes cleaning simple.
- Daily Cleaning: Wipe the entire surface of the raised toilet seat with a disinfectant wipe or a soft cloth dampened with a mild cleaning solution.
- Deep Cleaning: For a more thorough cleaning, the raised toilet seat can be easily removed from the toilet. Unfasten the side anchorages and lift the seat off. Clean all surfaces with soap and water, then rinse thoroughly and allow to air dry before reattaching.
- Important: Do not use abrasive cleaners or harsh chemicals, as these may damage the material.
Safety Guidelines
- Always ensure the raised toilet seat is securely attached to the toilet bowl before use.
- Do not stand on the raised toilet seat.
- Regularly check the anchorages for tightness and adjust if necessary.
- If you experience any instability or damage, discontinue use immediately and contact customer support.
Specifications
| Model Number | 3011 |
| Height Added | 4 inches (10 cm) |
| Compatibility | Round and Elongated toilets up to 15" wide |
| Material | Durable, easy-to-clean material |
| Weight Capacity | Up to 300 lbs (136 kg) (Note: This is an approximate capacity based on common product specifications and visual cues from product images.) |
| Package Dimensions | 16.73 x 15.08 x 6.97 inches; 3.57 Pounds |
Image: A side view of the PEPE Mobility Raised Toilet Seat, illustrating its robust construction and height.
Customer Support
For any questions, concerns, or assistance with your PEPE Mobility Raised Toilet Seat, please contact our customer support team. We are committed to ensuring your satisfaction and will respond to inquiries within 24 hours.
Visit the PEPE Mobility Store for more information and products.