RESUXI Professional Hair Clippers User Manual

1. Introduction

Thank you for choosing the RESUXI Professional Men's Hair Clippers. This cordless, zero-gapped, T-blade trimmer is designed for precision and ease of use, featuring a waterproof design and an LED display. It is ideal for detailed beard shaving, edging, lining, and general hair cutting. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new clippers to ensure optimal performance and longevity.

Package Contents:

• RESUXI Hair Clippers (Main Unit)
• 3 x Length Guide Combs (1mm, 2mm, 3mm)
• USB Charging Cable
• Cleaning Brush
• User Manual

An overview of the RESUXI Professional Hair Clippers and its included accessories, such as the main unit, three guide combs, USB charging cable, and cleaning brush.

2. Safety Information

Please read all safety instructions carefully before using the RESUXI hair clippers to ensure safe and proper operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

General Safety Precautions:

• Keep the appliance dry. Do not use it in or near water, except for rinsing the blade head as instructed.
• Do not immerse the main body of the appliance in water.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the appliance yourself. Contact qualified service personnel if needed.
• Use only the provided charging cable.
• Unplug the appliance before cleaning or when not in use for extended periods.
• Avoid dropping the appliance.
• Do not use if the blade is damaged or bent, as this may cause injury.

3. Setup

Charging the Clippers:

1. Ensure the clippers are turned off before charging.
2. Insert the USB charging cable into the charging port at the bottom of the clippers.
3. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port on a computer.
4. The LED display will illuminate and show the charging progress. A full charge takes approximately 1.5 hours.
5. Once fully charged, the display will indicate 100%. Disconnect the charging cable.

The clippers feature a USB charging design, allowing for convenient charging via various USB power sources. A full charge is typically achieved in 1.5 hours, providing up to 90 minutes of working time.

Attaching Guide Combs:

1. Select the desired length guide comb (1mm, 2mm, or 3mm).
2. Align the comb with the clipper blade and push firmly until it clicks securely into place.
3. To remove a comb, gently pull it away from the blade.

The package includes three different length limit combs (1mm, 2mm, 3mm) for versatile styling options and precise hair cutting lengths.

4. Operating Instructions

Turning On/Off:

Press the power button located at the bottom of the clippers to turn the device on or off. The smart digital LED display will illuminate upon activation, showing the current battery percentage and other indicators.

Key features of the RESUXI clippers, including the durable stainless steel blade, convenient bottom charging, intricately engraved body, and a smart LCD display showing power levels.

Hair Cutting and Trimming:

1. Ensure hair is clean and dry before trimming for optimal results.
2. For general cutting, comb hair in the direction of growth.
3. If unsure of the desired length, start with a longer guide comb and gradually switch to shorter ones.
4. Hold the clippers with the blade flat against the skin and move slowly against the direction of hair growth.
5. Use the zero-gapped T-blade for precise edging, outlining, and intricate detail work, such as hair art carving.

Showcasing the precision of the RESUXI clippers for fast balding, intricate engraving, and achieving sharp, clean lines for new hairstyles, capable of cutting hair as short as 0.01mm.

5. Maintenance and Cleaning

Cleaning the Blades:

1. After each use, turn off the clippers and remove any attached guide comb.
2. Use the provided cleaning brush to brush away loose hairs from the blade and cutting head.
3. The clippers feature an IPX4 waterproof design, allowing the blade head to be rinsed directly under running water for convenient cleaning. Do not submerge the entire unit.
4. Allow the blade to air dry completely before storing or reattaching the comb.

The RESUXI clippers feature an IPX4 water washable design, making the blade easy to clean by rinsing under running water. Ensure the main body is not submerged.

Oiling the Blades:

Regularly oiling the blades helps maintain their sharpness, reduces friction, and extends the life of the clippers. Apply a small drop of clipper oil (not included) to the teeth of the blade after every few uses or when the LCD display indicates an oil reminder. Turn on the clippers for a few seconds to distribute the oil evenly across the blades.

6. Troubleshooting

7. Specifications

• Model: JM-711
• Brand: RESUXI
• Blade Material: Stainless Steel
• Power Source: Battery Powered (USB Charging)
• Battery Type: Lithium Battery 14500
• Battery Capacity: 600mAh
• Charging Time: Approximately 1.5 Hours
• Working Time: Up to 90 minutes
• Waterproof Rating: IPX4 (Splash-proof)
• Motor Speed: 6500±500rpm
• Voltage: 110-240V 50/60Hz
• Power: 10W
• Color: Gold
• Dimensions: 7.52 x 3.54 x 1.85 inches
• Weight: 11.36 ounces

8. Warranty and Support

For detailed warranty information and customer support, please refer to the warranty card included with your product. Keep your purchase receipt as proof of purchase for any warranty claims.

Contact Information:

• Brand Store: RESUXI Amazon Store
• For further assistance, please visit the official RESUXI website or contact their dedicated support team.