1. Introduction
The Phanteks Glacier One 360MPH is an all-in-one liquid CPU cooler designed for efficient and quiet cooling of powerful CPUs. It features a triple 120mm MP PWM fan configuration, optimized for high airflow and static pressure. The cooler includes an infinity mirror pump cap design with integrated D-RGB lighting and D-RGB Halos Fan Frames for customizable aesthetics. This manual provides instructions for installation, operation, and maintenance of your Glacier One 360MPH cooler.
Image 1.1: The Phanteks Glacier One 360MPH AIO Liquid CPU Cooler, showcasing its white aesthetic and infinity mirror pump design.
2. Setup and Installation
The Glacier One 360MPH is pre-filled for a plug-and-play installation. Ensure your system is powered off and disconnected from the power source before beginning installation.
2.1. Compatibility
This cooler is compatible with the following CPU sockets:
- Intel Sockets: LGA 115x, 1366, 2011, 2011-3, 2066, 1200
- AMD Sockets: AM4, sTRX4*, TR4* (*Threadripper bracket included with CPU)
2.2. Component Overview
Familiarize yourself with the main components of your AIO cooler.
Image 2.1: Overview of the Glacier One 360MPH, showing the radiator with three fans, pump block, and tubing.
Image 2.2: Close-up of the pump block and the detachable infinity mirror cap.
2.3. Installation Steps (General)
- Prepare Motherboard: Install the appropriate backplate and standoffs for your CPU socket.
- Apply Thermal Paste: The cooler comes with thermal paste pre-applied. If reapplying, ensure the CPU surface is clean.
- Mount Pump Block: Secure the pump block onto the CPU, ensuring even pressure.
- Mount Radiator: Install the radiator and fans into your PC case. The flexible braided tubing and included Tube Clips assist in routing.
- Connect Cables: Connect the pump PWM cable, D-RGB 3-PIN cable, and fan PWM cables to the motherboard or a D-RGB controller.
Refer to your motherboard and PC case manuals for specific mounting locations and cable routing options.
Image 2.3: The Glacier One 360MPH installed within a computer case, showing the radiator mounted at the top and the pump block on the CPU.
3. Operating Instructions
3.1. D-RGB Lighting Control
The integrated D-RGB lighting in the infinity mirror pump cap and the D-RGB Halos Fan Frames can be controlled and synchronized. Connect the D-RGB 3-PIN cable to a compatible D-RGB header on your motherboard or a Phanteks D-RGB controller. Use your motherboard's RGB software or Phanteks' D-RGB software to customize lighting effects.
3.2. Fan and Pump Operation
The three 120mm MP PWM fans and the pump are PWM controlled. This allows for dynamic speed adjustments based on CPU temperature, optimizing for both cooling performance and noise levels.
- Fan Speed: 500 - 2200 ± 10% RPM.
- Pump Speed: PWM controlled, 2800 RPM ± 300 (boosts to 3600 RPM > 60°C liquid temp).
Adjust fan and pump curves via your motherboard's BIOS/UEFI settings or dedicated fan control software for optimal performance and acoustics.
4. Maintenance
The Phanteks Glacier One 360MPH is a closed-loop AIO system, requiring minimal maintenance. Regular checks can help ensure optimal performance and longevity.
- Dust Removal: Periodically clean dust from the radiator fins and fan blades using compressed air. Ensure fans are not spinning during cleaning.
- Cable Management: Verify all cables (PWM, D-RGB) are securely connected and not obstructing airflow.
- Tubing Inspection: Check the braided tubing for any signs of wear, kinks, or leaks.
- Pump Block: Ensure the pump block is securely mounted to the CPU.
5. Troubleshooting
This section addresses common issues you might encounter.
5.1. High CPU Temperatures
- Check Pump Connection: Ensure the pump's PWM cable is correctly connected to the motherboard's CPU_FAN or AIO_PUMP header and is receiving power.
- Verify Fan Operation: Confirm that all three fans are spinning. Check their PWM connections.
- Thermal Paste: Ensure the thermal paste application is adequate and the pump block makes full contact with the CPU.
- Airflow: Verify that the radiator fans are oriented correctly for optimal airflow (intake or exhaust, depending on case configuration).
5.2. D-RGB Lighting Not Working
- Cable Connection: Ensure the D-RGB 3-PIN cable is securely connected to a compatible 5V D-RGB header on your motherboard or controller.
- Software: Check your motherboard's RGB software or Phanteks' D-RGB software to ensure lighting effects are enabled and configured correctly.
- Compatibility: Confirm your motherboard's D-RGB header is 5V (3-PIN) and not 12V (4-PIN), as incompatible connections can cause damage.
5.3. Excessive Noise
- Fan Noise: Adjust fan speed curves in BIOS/UEFI or software to reduce RPMs at lower temperatures. Check for any obstructions or loose fan screws.
- Pump Noise: Ensure the pump is running at an appropriate speed. Some pump noise can be normal, especially at higher RPMs. Verify the pump is the highest point in the loop to prevent air bubbles from accumulating in the pump.
6. Specifications
| Feature | Detail |
|---|---|
| Model | P-GO360MPH_DWT01 |
| Socket Compatibility | Intel LGA 115x, 1366, 2011, 2011-3, 2066, 1200; AMD AM4, sTRX4*, TR4* |
| Pump Block Dimensions | 93 x 92 x 41mm (LxWxH) |
| Radiator Dimensions | 394 x 120 x 27mm (LxWxH) |
| Tubing Length | 400mm |
| Tubing Outside Diameter | 11mm OD |
| Thermal Paste | 4.5 W/m-k Pre-applied + Phanteks PH-NDC |
| Pump Speed | 2800 RPM ± 300 (boosts to 3600 RPM > 60°C liquid temp) |
| Pump Noise | 27 dBA |
| Fan Type | PH-F120MP_WT02 (3x 120mm) |
| Fan Speed | 500 - 2200 ± 10% RPM |
| Air Flow | 13.8 – 60.51 CFM |
| Static Pressure | 0.17 – 3.41 mm-H₂O |
| Fan Noise | 18 - 34.2 dBA |
| D-RGB Lighting | 3-PIN Digital-RGB LED strip (5V, data, Ground) |
| Material | Copper (cold plate) |
| Item Weight | 1 Kilogram |
7. Warranty & Support
7.1. Warranty Information
This product is covered by a 1-year manufacturer warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Phanteks website.
7.2. Technical Support
For further assistance, technical support, or to view additional resources, please visit the official Phanteks website or contact their customer service. You can also visit the Phanteks Store on Amazon for product information.