Amazon Basics Smart Single Pole Switch User Manual

1. Introduction

The Amazon Basics Smart Single Pole Switch (Model WS29-01) allows you to control your lighting with convenience and smart home integration. Designed to work exclusively with Amazon Alexa, this switch enables voice control and scheduling of your lights without the need for a separate smart home hub. It connects directly to your 2.4 GHz Wi-Fi network.

Image 1.1: Amazon Basics Smart Single Pole Switch and its retail packaging.

This manual provides essential information for the safe installation, operation, and maintenance of your smart switch. Please read it thoroughly before installation and keep it for future reference.

2. Safety Information

WARNING: RISK OF ELECTRIC SHOCK.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and safety.
• Always turn off power at the circuit breaker before installing or servicing the switch. Verify power is off with a voltage tester.
• This device is intended for installation in a standard wall box. Ensure the wall box has sufficient space for the switch and wiring.
• Do not exceed the maximum electrical ratings of the switch (5 Amps, 120 Volts).
• A neutral wire is required for the operation of this smart switch. If your wall box does not have a neutral wire, consult a qualified electrician.
• Use only copper conductors.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).

3. Pre-Installation Requirements

Before beginning installation, ensure your home and existing electrical setup meet the following criteria:

• Neutral Wire: A neutral wire is required for this smart switch. Look for a bundle of white wires in your switch box. Most US houses built after 1978 include neutral wires.
• 2.4 GHz Wi-Fi: You must have a 2.4 GHz Wi-Fi network available in the installation area. This switch does not support 5 GHz Wi-Fi.
• Amazon Alexa Device: This switch works exclusively with Amazon Alexa. You will need an Alexa-enabled device (e.g., Echo, Echo Dot) and the Alexa app to set up and control the switch.
• Single Pole Wiring: This is a single pole switch, designed to control a light from one location only. Do not attempt to install it in a 3-way or multi-way circuit.

Image 3.1: Visual guide for checking neutral wire and 2.4 GHz Wi-Fi availability.

4. Package Contents

• Amazon Basics Smart Single Pole Switch (WS29-01)
• Wire Nuts
• Mounting Screws
• Instruction Manual

5. Installation

Installation involves working with electrical wiring. If you are unfamiliar with electrical work or uncomfortable with the process, it is strongly recommended to contact a licensed electrician.

Image 5.1: Options for installation: Do-It-Yourself with tools or contact an electrician.

Tools Required:

• Screwdriver (Phillips and/or Flathead)
• Voltage Tester

Installation Steps:

1. Turn Off Power: Locate the circuit breaker that controls the light switch you intend to replace. Turn off the power to that circuit. Use a voltage tester to confirm that the power is off at the switch location.
2. Remove Old Switch: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (Line, Load, Neutral, Ground). It is recommended to label the wires.
3. Identify Wires:
   • Line Wire (Hot): Typically black, brings power from the circuit breaker.
   • Load Wire: Typically black, goes to the light fixture.
   • Neutral Wire: Typically white, required for smart switches.
   • Ground Wire: Typically bare copper or green.
4. Wire the Smart Switch: Connect the wires from your wall box to the corresponding terminals on the Amazon Basics Smart Switch using wire nuts:
   • Connect the Line wire to the switch's LINE terminal.
   • Connect the Load wire to the switch's LOAD terminal.
   • Connect the Neutral wire to the switch's NEUTRAL terminal.
   • Connect the Ground wire to the switch's GROUND terminal.
5. Mount the Switch: Carefully fold the wires into the wall box, ensuring they are not pinched. Secure the smart switch into the wall box with the provided screws. Attach the new wall plate.
6. Restore Power: Turn the power back on at the circuit breaker. The status indicator on the switch should illuminate, indicating it is ready for setup.

6. Operating Instructions

Once installed and connected to your Alexa account, the Amazon Basics Smart Single Pole Switch offers multiple ways to control your lights.

Image 6.1: Front view of the smart switch highlighting the On/Off switch and Status Indicator.

Physical Control:

Press the rocker switch on the front of the device to manually turn the connected light ON or OFF. The status indicator light will change to reflect the current state.

Voice Control with Alexa:

After successfully linking the switch to your Alexa account, you can use voice commands to control your lights. Ensure your Alexa device is within hearing range.

• "Alexa, turn on [Light Name]."
• "Alexa, turn off [Light Name]."
• "Alexa, set [Light Name] to 50%." (Note: This is a non-dimming switch, so percentage commands may not apply or will result in on/off behavior).

You can customize the name of your light in the Alexa app.

Scheduling and Routines with Alexa:

Utilize the Alexa app to create routines and schedules for your smart switch. This allows for automated control of your lights based on time, sunrise/sunset, or other triggers.

• Open the Alexa app.
• Navigate to the "More" tab, then select "Routines."
• Create new routines to turn your lights on or off at specific times, or as part of a larger smart home automation sequence.

7. Maintenance

The Amazon Basics Smart Single Pole Switch requires minimal maintenance.

• Cleaning: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
• Regular Checks: Periodically check the switch and wall plate for any signs of damage or loose connections. If any issues are observed, turn off power at the circuit breaker and consult a qualified electrician.

8. Troubleshooting

If you encounter issues with your smart switch, refer to the following troubleshooting steps:

• Switch Not Responding:
  • Ensure the circuit breaker is ON.
  • Check if the status indicator light on the switch is illuminated. If not, power cycle the switch at the circuit breaker.
  • Verify that the wiring connections are secure. (Turn off power at the breaker before checking).
• Cannot Connect to Wi-Fi/Alexa:
  • Confirm your Wi-Fi network is 2.4 GHz. This switch does not support 5 GHz networks.
  • Ensure your Wi-Fi router is working correctly and the signal strength is adequate at the switch location.
  • Restart your Wi-Fi router.
  • Ensure your Alexa app is up to date and your Alexa device is online.
  • Try resetting the smart switch (refer to the Alexa app for specific reset instructions, usually involving holding the switch button for a period).
  • If you are outside the United States, ensure your Amazon account region is set to a supported region (e.g., United States) as some users have reported connectivity issues in other regions.
• Voice Commands Not Working:
  • Verify that your Alexa device is powered on and connected to the internet.
  • Check the device name in the Alexa app to ensure it matches the name you are using in your voice commands.
  • Ensure the smart switch is linked to your Alexa account and appears in the Alexa app's device list.

9. Specifications

10. Warranty and Support

For warranty information and customer support, please refer to the Amazon Basics official website or contact Amazon customer service directly. Details regarding product registration, warranty claims, and technical assistance can typically be found on the product support pages.

You can visit the Amazon Basics store for more information: Amazon Basics Store