Introduction
Thank you for choosing the BluMill Ice Maker Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before first use and keep them for future reference.
This ice maker is designed to produce spherical ice cubes quickly and conveniently, with a capacity of up to 12 kg of ice in 24 hours, and the first batch ready in 7 to 15 minutes.
Important Safety Instructions
- Read all instructions before operating the appliance.
- Ensure the voltage matches the rating label on the appliance.
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Unplug from the outlet when not in use and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Keep the appliance away from heat sources and direct sunlight.
- Use only potable water in the water tank.
- Ensure proper ventilation around the appliance. Maintain at least 10 cm of space on all sides.
- This appliance is for household use only.
Product Components
Familiarize yourself with the parts of your BluMill Ice Maker Machine:
- Ice Maker Unit
- Ice Basket
- Ice Scoop
- Water Reservoir (internal)
- Control Panel with Indicator Lights
- Transparent Lid

Image: The BluMill Ice Maker Machine with its lid open, revealing a basket full of freshly made spherical ice cubes.

Image: The BluMill Ice Maker Machine highlighting its features: 12kg ice production in 24 hours, easy to clean, and auto shut-off function.
Setup
Follow these steps for initial setup:
- Unpacking: Carefully remove the ice maker from its packaging. Remove all packing materials, including any tape or protective films.
- Placement: Place the ice maker on a stable, level surface, away from direct sunlight and heat sources. Ensure there is at least 10 cm of clear space around the unit for proper ventilation.
- Initial Cleaning: Before first use, clean the interior of the ice maker. Remove the ice basket and wash it with warm water and a mild detergent. Wipe the interior of the water reservoir and ice-making components with a damp cloth. Rinse thoroughly and dry.
- Resting Period: After transportation, allow the appliance to stand upright for at least 2-4 hours before plugging it in. This allows the refrigerant to settle.
- Power Connection: Plug the power cord into a grounded electrical outlet.

Image: An interior view of the BluMill Ice Maker Machine, showing the empty water reservoir and the area where the ice basket is placed.
Operating Instructions
Operating your ice maker is straightforward:
- Fill Water Reservoir: Open the lid and pour potable water into the water reservoir up to the MAX fill line. Do not overfill. The maximum capacity is 3.5 liters.
- Start Ice Production: Press the 'ON/OFF' button on the control panel. The 'ICE' indicator light will illuminate, and the machine will begin the ice-making cycle.
- First Batch: The first batch of ice cubes will be ready in approximately 7 to 15 minutes, depending on the ambient temperature and water temperature.
- Indicator Lights:
- ADD WATER: This light will illuminate when the water reservoir is low and needs refilling. The machine will pause ice production. Add water and press 'ON/OFF' to resume.
- ICE FULL: This light will illuminate when the ice basket is full. The machine will automatically stop ice production. Remove some ice cubes to resume production.
- ICE: This light indicates that the machine is actively making ice.
- Collecting Ice: Use the provided ice scoop to remove ice cubes from the basket.
- Stopping Operation: To stop the ice maker, press the 'ON/OFF' button.

Image: A close-up of the control panel showing the 'ADD WATER', 'ICE FULL', 'ICE' indicator lights, and the 'ON/OFF' button.

Image: A hand using the provided scoop to transfer spherical ice cubes from the ice maker into a drinking glass.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and hygiene:
- Daily Cleaning: After each use, drain any remaining water from the reservoir. Remove the ice basket and clean it with warm water and a mild detergent. Wipe the interior with a clean, damp cloth.
- Deep Cleaning (Weekly/Bi-weekly): For a more thorough cleaning, prepare a solution of water and a small amount of vinegar or lemon juice. Pour it into the reservoir and run a few ice-making cycles (discard the first few batches of ice). Then, drain the solution and rinse the reservoir thoroughly with clean water.
- Exterior Cleaning: Wipe the exterior of the appliance with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing the ice maker for an extended period, ensure it is completely dry inside and out. Store it in a cool, dry place.

Image: The removable ice basket filled with spherical ice cubes, with the ice scoop resting inside. This component should be regularly cleaned.
Troubleshooting
If you encounter issues, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not working | No power; 'ADD WATER' light on; 'ICE FULL' light on. | Check power connection; Add water to reservoir; Remove ice from basket. |
| Ice cubes are too small or soft | Water temperature too high; Ambient temperature too high; First few cycles. | Use colder water; Place in a cooler environment; The first few batches are typically smaller. |
| 'ADD WATER' light is on, but reservoir has water | Water sensor malfunction or obstruction. | Clean the water sensor (refer to maintenance); Contact customer support if issue persists. |
| Unusual noise during operation | Normal compressor noise; Unit not level; Obstruction. | Ensure unit is on a level surface; Check for any foreign objects. |
Technical Specifications
| Feature | Specification |
|---|---|
| Model Name | Machine à glaçons |
| Brand | BluMill |
| Product Dimensions | 34 x 24 x 28 cm |
| Weight | 9 kg |
| Capacity (Water Tank) | 3.5 Liters |
| Ice Production | Up to 12 kg in 24 hours |
| Ice Making Time | 7 to 15 minutes per batch |
| Voltage | 220 Volt |
| Refrigerant | R600a |
| Material | Metal |
Warranty and Support
Your BluMill Ice Maker Machine comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact BluMill customer service through your retailer or the official BluMill website.
Please have your model number (Machine à glaçons) and purchase date available when contacting support.






