1. Introduction
This manual provides instructions for the nanoblock Ultraman Vol. 2 mininano Series Building Kit. This set includes six distinct Ultraman characters: Ultraman, Red King, Alien Metron, Dada, Pigmon, and Kanegon. Each assembled figure stands approximately 1.89 inches tall on average. This kit is designed as an entry-level building experience, utilizing micro-sized blocks for detailed construction.
nanoblock pieces are as small as 4mm x 4mm x 5mm, allowing for the creation of intricate 3D models with remarkable detail and realism. The building process is designed to be engaging, resulting in models that are suitable for display and collection.

Image 1.1: The six assembled nanoblock Ultraman Vol. 2 characters.
2. Setup
Before beginning assembly, ensure all components are present and accounted for. The kit comes in a blind box complete set, meaning each of the six characters is individually packaged within the main box.
- Unboxing: Carefully open the main product box. Inside, you will find six individual blind packages, each containing the parts for one character.
- Part Identification: Open one individual character package. Each package contains the necessary nanoblock pieces and a detailed step-by-step instruction sheet specific to that character.
- Workspace Preparation: Prepare a clean, well-lit, and flat surface for assembly. Due to the small size of the blocks, it is recommended to work in an area where small parts are less likely to be lost.

Image 2.1: The nanoblock Ultraman Vol. 2 product box.

Image 2.2: Contents of the nanoblock Ultraman Vol. 2 set, showing individual blind packages.
3. Operating (Assembly Instructions)
The assembly process for each nanoblock character is guided by the included step-by-step instructions. Follow these instructions carefully to ensure correct construction.
- Review Instructions: Before starting, review the entire instruction sheet for the character you are building. Familiarize yourself with the block types and the sequence of steps.
- Layer-by-Layer Construction: nanoblock models are typically built layer by layer. Pay close attention to the orientation and placement of each block as indicated in the diagrams.
- Precision: Due to the small size of the blocks, precision is key. Ensure each block is firmly connected to the previous layer.
- Patience: Building nanoblock models requires patience. If you encounter difficulty, take a short break and re-examine the instructions.

Image 3.1: Example of nanoblock step-by-step assembly guidance.
4. Maintenance
Proper care will help preserve the appearance and integrity of your assembled nanoblock models.
- Cleaning: To clean assembled models, gently dust them with a soft brush or a can of compressed air. Avoid using water or harsh cleaning agents, as these may damage the blocks or loosen connections.
- Storage: Store models in a stable location away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
- Handling: Handle assembled models carefully to avoid accidental disassembly.
5. Troubleshooting
If you encounter issues during assembly or with your nanoblock kit, refer to the following common solutions:
- Missing Pieces: If you believe a piece is missing, carefully re-check your workspace and the packaging. If a piece is genuinely missing, refer to the Warranty and Support section for contact information.
- Difficulty Connecting Blocks: Ensure blocks are correctly aligned and apply gentle, even pressure. Avoid forcing blocks, as this can cause damage.
- Model Instability: Double-check the instruction steps to ensure all blocks are placed in the correct orientation and are fully connected. Loose connections can lead to instability.
6. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (average per figure) | 1.65 x 0.98 x 1.89 inches |
| Item Model Number | NBMC_22S |
| Item Weight (entire set) | 0.704 ounces |
| Manufacturer | Kawada |
| Original Release Date | 2022 |
7. Safety Information
WARNING: This product contains small parts which are considered a choking hazard. Not suitable for children under 3 years of age. Adult supervision is recommended during assembly and play for younger users.
8. Warranty and Support
This nanoblock product is an officially licensed Kawada product. The product box features a Bandai Namco warning label, which confirms its authenticity and distribution by an authorized U.S. retailer. This product has undergone thorough safety testing and complies with all North American consumer product safety regulations.
The presence of the official label also grants the purchaser access to product support assistance within the United States. For inquiries regarding missing parts, assembly issues, or other product-related concerns, please refer to the contact information provided on the product packaging or the official nanoblock website for customer service details.