AEOTEC GP-AEOMSSUS

Download PDF
Contents

Aeotec SmartThings Motion Sensor User Manual

Model: GP-AEOMSSUS | Brand: AEOTEC

1. Product Overview

The Aeotec SmartThings Motion Sensor is a versatile Zigbee-enabled device designed to enhance your smart home security and automation. It detects motion within its field of view and can also monitor ambient temperature. This sensor integrates seamlessly with compatible Zigbee hubs, including Aeotec SmartThings Hubs and other SmartThings-compatible devices, allowing for advanced home automation routines and real-time monitoring.

Aeotec SmartThings Motion Sensor front view

Image: Front view of the Aeotec SmartThings Motion Sensor, showing its compact, white, circular design with the motion detection lens in the center.

Key Features:

  • 24/7 Monitoring: Receive alerts for unexpected movement.
  • Home Automation: Trigger devices to turn on/off based on presence.
  • Wide Detection Range: Captures motion up to 15 feet with a 120-degree view.
  • Magnetic Mounting: Features a quick-tilt magnetic ball mount for flexible positioning.
  • Temperature Sensing: Integrated temperature monitoring.
  • Zigbee Compatibility: Works with Aeotec SmartThings Hub and other compatible Zigbee hubs.

2. Setup Guide

2.1 What's in the Box

  • Aeotec SmartThings Motion Sensor
  • Magnetic Ball Mount
  • CR123A Battery (pre-installed or included separately)
  • Quick Start Guide (this manual)

2.2 Battery Installation

The sensor requires one CR123A battery. It may be pre-installed with a pull tab. If not, follow these steps:

  1. Gently twist the back cover of the sensor counter-clockwise to open it.
  2. Insert the CR123A battery, ensuring the positive (+) and negative (-) terminals align correctly.
  3. Replace the back cover by aligning the marks and twisting clockwise until secure.

2.3 Pairing with a Smart Home Hub

The Aeotec SmartThings Motion Sensor uses Zigbee for communication. To pair it with your smart home hub:

  1. Ensure your compatible Zigbee hub (e.g., Aeotec SmartThings Hub) is powered on and in pairing mode. Refer to your hub's manual for specific instructions on enabling pairing mode.
  2. Open your SmartThings app or preferred smart home application.
  3. Select the option to 'Add device' or 'Scan for devices'.
  4. While the hub is searching, press the connect button on the motion sensor (usually a small pinhole button on the side or back) using a paperclip or similar tool. The LED indicator on the sensor will blink to show it's in pairing mode.
  5. Once detected, follow the on-screen prompts in your app to complete the pairing process. You may be asked to name the device and assign it to a room.
  6. The LED will stop blinking and turn solid for a moment, then turn off, indicating successful pairing.

2.4 Mounting the Sensor

The sensor comes with a magnetic ball mount for flexible positioning.

  1. Choose a suitable location for the sensor. Consider areas where motion detection is critical, such as hallways, entryways, or rooms.
  2. Clean the mounting surface to ensure proper adhesion.
  3. Attach the magnetic ball mount to the desired surface using the included adhesive tape or screws (if applicable).
  4. Place the motion sensor onto the magnetic ball mount. The magnetic connection allows for easy adjustment of the sensor's angle.
  5. Adjust the sensor's angle to cover the desired detection area. The sensor can detect motion up to 15 feet with a 120-degree view range.
Aeotec SmartThings Motion Sensor with magnetic mount and packaging

Image: The Aeotec SmartThings Motion Sensor shown alongside its packaging, highlighting the magnetic mounting feature and key functionalities.

3. Operating Instructions

3.1 Motion Detection

Once paired and positioned, the sensor will automatically detect motion within its specified range and angle. When motion is detected, it sends a signal to your connected smart home hub.

  • Real-time Alerts: Configure your smart home app to send notifications to your smartphone when motion is detected, providing 24/7 monitoring.
  • Automation Triggers: Use motion detection as a trigger for various smart home routines. For example, turn on lights when motion is detected in a room, or activate a security camera.

3.2 Temperature Sensing

The sensor also includes an integrated temperature sensor. This data is transmitted to your smart home hub and can be viewed in your smart home application.

  • Environmental Monitoring: Monitor the ambient temperature of the room where the sensor is located.
  • Temperature-based Automation: Create routines that respond to temperature changes, such as adjusting a smart thermostat or turning on a fan.

3.3 Smart Home Integration

Leverage your smart home app to create custom automations and scenes:

  • Entryway Lighting: Turn on lights automatically when you enter a dark room.
  • Security Monitoring: Receive alerts if motion is detected while you are away.
  • Energy Saving: Turn off lights or adjust climate control when no motion is detected for a set period.

4. Maintenance

4.1 Battery Replacement

The sensor is powered by one CR123A battery. When the battery level is low, your smart home app will typically notify you. To replace the battery:

  1. Gently twist the back cover of the sensor counter-clockwise to open it.
  2. Remove the old CR123A battery.
  3. Insert a new CR123A battery, ensuring correct polarity (+/-).
  4. Replace the back cover by aligning the marks and twisting clockwise until secure.
  5. Dispose of the old battery responsibly according to local regulations.

Typical battery life is between 9 and 18 months, depending on usage and environmental factors.

4.2 Cleaning the Sensor

To ensure optimal performance, keep the sensor's lens clean.

  • Use a soft, dry, lint-free cloth to gently wipe the sensor lens.
  • Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the device.

5. Troubleshooting

5.1 Sensor Not Detecting Motion

  • Check Battery: Ensure the battery is not depleted. Replace if necessary.
  • Verify Placement: Confirm the sensor is positioned correctly to cover the desired area. Obstructions can block its field of view.
  • Range: Ensure the motion is within the 15-foot detection range.
  • Hub Connectivity: Check if the sensor is still connected to your Zigbee hub. Refer to your app for device status.

5.2 Connectivity Issues (Not Pairing or Disconnecting)

  • Hub Proximity: Ensure the sensor is within range of your Zigbee hub. Walls and other obstacles can reduce signal strength.
  • Re-pair Device: Try removing the device from your smart home app and re-pairing it following the steps in Section 2.3.
  • Reset Sensor: If re-pairing fails, perform a factory reset on the sensor (refer to your hub's documentation or Aeotec support for specific reset procedures, as it often involves holding the connect button for an extended period).
  • Hub Status: Verify your Zigbee hub is online and functioning correctly.

5.3 Inaccurate Temperature Readings

  • Placement: Avoid placing the sensor near heat sources (e.g., direct sunlight, vents, appliances) or cold drafts, which can affect readings.
  • Calibration: Some smart home platforms allow for temperature offset calibration. Check your app's settings for the device.

6. Product Specifications

FeatureSpecification
BrandAEOTEC
Model NumberGP-AEOMSSUS
ColorWhite
Power SourceBattery Powered
Battery Type1 CR123A (included)
Wireless ProtocolZigbee
Maximum Range50 Feet (wireless communication)
Motion Detection RangeUp to 15 feet
Motion Detection View Angle120 degrees
Mounting TypeWall Mount (Magnetic Ball Mount)
Operating Temperature32 Degrees Fahrenheit (0°C) and above
Item Weight5.3 ounces
Package Dimensions3.66 x 3.66 x 3.19 inches
Compatible DevicesAeotec SmartThings Hub, other compatible Zigbee Hubs

7. Warranty and Support

7.1 Warranty Information

Aeotec products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period and terms for your SmartThings Motion Sensor, please refer to the warranty card included with your product or visit the official Aeotec website. Keep your proof of purchase for warranty claims.

7.2 Customer Support

If you encounter any issues or have questions not covered in this manual, please contact Aeotec customer support:

  • Online Support: Visit the official Aeotec support website for FAQs, troubleshooting guides, and contact options.
  • SmartThings Community: For general SmartThings integration questions, the SmartThings community forums can be a valuable resource.

© 2025 AEOTEC. All rights reserved. Information subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.