1. Product Overview
The Aeotec SmartThings Button is a compact, wireless Zigbee remote control designed to enhance your smart home experience. It allows for convenient control of compatible lights, home appliances, and other SmartThings-enabled devices with a simple press. This device also integrates a temperature sensor, providing environmental data to your SmartThings hub.
Image 1.1: Top view of the Aeotec SmartThings Button, showing its minimalist design and central button icon.
Key Features:
- Control compatible lights, home appliances, and other Smart Home devices at the touch of a button.
- Integrated temperature sensor for environmental monitoring.
- Easy mounting options: magnet or 3M adhesive strip.
- Compact and simple design for discreet placement.
2. Package Contents
Upon opening the package, verify that all components are present and undamaged.
Image 2.1: The Aeotec SmartThings Button shown alongside its retail packaging.
- Aeotec SmartThings Button (GP-AEOBTNUS)
- CR2450 Battery (pre-installed or included separately)
- Quick Start Guide (not part of this manual)
- 3M Adhesive Strip (for mounting)
3. Setup
3.1. Battery Installation
The Aeotec SmartThings Button requires one CR2450 battery for operation. While some product specifications may list CR2, user experience indicates CR2450 is the correct battery type for this model.
- Gently twist the back cover of the button counter-clockwise to open it.
- If a battery is already installed with a pull tab, remove the tab. If installing a new battery, insert the CR2450 battery with the positive (+) side facing up.
- Align the back cover and twist clockwise to secure it.
3.2. Pairing with SmartThings Hub
To integrate the button into your smart home system, it must be paired with a compatible SmartThings Hub.
- Ensure your SmartThings Hub is powered on and connected to your network.
- Open the SmartThings mobile application on your smartphone or tablet.
- Navigate to the 'Add device' or '+' icon within the app.
- Select 'Device type' or 'Scan for nearby devices'.
- While the app is searching, press and hold the button on your Aeotec SmartThings Button for approximately 5 seconds until the LED indicator begins to flash blue.
- Release the button. The LED will continue to flash while attempting to pair.
- Once successfully paired, the LED will turn solid blue for a few seconds and then turn off. The device will appear in your SmartThings app.
- Follow any on-screen prompts in the SmartThings app to name the device and assign it to a room.
4. Operation
The Aeotec SmartThings Button offers versatile control through various press actions, which can be configured within the SmartThings application.
Image 4.1: The Aeotec SmartThings Button, highlighting its simple, single-button interface.
4.1. Configurable Button Actions
Within the SmartThings app, you can assign different actions or routines to the following button presses:
- Single Press: A quick, momentary press and release.
- Double Press: Two quick presses in succession.
- Long Press: Press and hold the button for approximately 2-3 seconds.
Refer to the SmartThings application's automation or routines section to customize these actions to control your smart devices or trigger specific scenes.
4.2. Temperature Sensor
The integrated temperature sensor reports the ambient temperature to your SmartThings Hub. This data can be viewed within the SmartThings app and used in automations, for example, to trigger a fan if the temperature exceeds a certain threshold.
5. Maintenance
5.1. Battery Replacement
When the battery level is low, the SmartThings app will typically notify you. To replace the battery:
- Twist the back cover counter-clockwise to open the button.
- Remove the old CR2450 battery.
- Insert a new CR2450 battery with the positive (+) side facing up.
- Secure the back cover by twisting it clockwise.
Dispose of used batteries according to local regulations.
6. Troubleshooting
If you encounter issues with your Aeotec SmartThings Button, consider the following:
- Device Not Responding: Check the battery level in the SmartThings app. Replace the battery if it is low. Ensure the button is within range of your SmartThings Hub or a Zigbee repeater.
- Pairing Issues: Ensure the button is in pairing mode (flashing blue LED). Try moving the button closer to the SmartThings Hub during the pairing process. If issues persist, try resetting the button (refer to manufacturer's specific reset instructions, often a long press during power-up or a pinhole reset, though not explicitly detailed in provided data).
- Inaccurate Temperature Readings: Ensure the button is not placed near heat sources or in direct sunlight, which can affect readings.
- Intermittent Connectivity: This could be due to interference or range issues. Consider adding more Zigbee devices (which act as repeaters) to strengthen your mesh network.
For further assistance, consult the SmartThings app's help section or the Aeotec support website.
7. Specifications
| Specification | Detail |
|---|---|
| Model Number | GP-AEOBTNUS |
| Brand | Aeotec |
| Connectivity | Zigbee |
| Power Source | 1 x CR2450 Battery (Note: Product specifications may state CR2, but CR2450 is commonly used) |
| Integrated Sensor | Temperature |
| Mounting Options | Magnet, 3M Adhesive Strip |
| Dimensions | Refer to package dimensions: 3.7 x 3.54 x 2.13 inches |
| Manufacturer | Aeotec |
8. Warranty and Support
The Aeotec SmartThings Button is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Aeotec website. For technical support, troubleshooting guides, and frequently asked questions, please visit the Aeotec support portal or the SmartThings community forums.
Online Resources:
