IKEA NANNARP Legs User Manual

Introduction

The IKEA NANNARP legs are designed to provide stable and aesthetic support for your IKEA BESTA storage systems. This set includes four durable aluminium legs, each measuring 100x100x100mm, ensuring a consistent and elevated look for your furniture. This manual provides essential information for safe installation, proper use, and maintenance of your NANNARP legs.

Image: A pair of IKEA NANNARP legs, showcasing their silver aluminium finish and the integrated screw for attachment.

Safety Information

• Always ensure the BESTA unit is placed on a flat, stable surface before and after leg installation.
• Do not overtighten screws during installation, as this may damage the furniture or the legs.
• Verify that all legs are securely attached before placing items on or moving the BESTA unit.
• Distribute weight evenly across the BESTA unit to maintain stability and prevent tipping.
• Keep small parts and tools out of reach of children during assembly.

Setup and Installation

The NANNARP legs are designed for easy screw-in and bolt-on installation to compatible IKEA BESTA storage systems. A set of four legs is provided to ensure proper support for your unit.

Tools Required:

• Screwdriver (appropriate for the leg screws, typically Phillips head)

Installation Steps:

1. Carefully place your BESTA unit upside down on a soft, clean surface to prevent scratching. Ensure the surface is stable.
2. Locate the pre-drilled holes or designated mounting points for legs on the bottom corners of your BESTA unit.
3. Align one NANNARP leg with a mounting point. The integrated screw on the leg should fit into the hole.
4. Using a screwdriver, carefully tighten the leg until it is firmly secured. Do not overtighten.
5. Repeat steps 3 and 4 for the remaining three legs, ensuring all four legs are securely attached.
6. Once all legs are installed, carefully turn the BESTA unit upright.
7. Verify the stability of the unit by gently rocking it. If any wobbling occurs, re-check the tightness of each leg.

Image: A NANNARP leg securely installed on an IKEA BESTA unit, demonstrating the flush fit and stable connection.

Image: An IKEA BESTA storage system elevated by NANNARP legs, integrated into a modern living room environment, showcasing the product's intended use.

Operating and Use

Once installed, the NANNARP legs provide stable elevation for your BESTA unit. Ensure the unit is placed on a level floor to prevent uneven stress on the legs. Avoid dragging the furniture; always lift and move it to prevent damage to the legs or the floor.

Maintenance

To maintain the appearance and integrity of your NANNARP legs, follow these simple care instructions:

• Cleaning: Wipe the legs with a dry cloth to remove dust and dirt. Do not use abrasive cleaners or harsh chemicals, as these may damage the aluminium finish.
• Inspection: Periodically check the tightness of the screws connecting the legs to the BESTA unit. Retighten if necessary to ensure continued stability.

Troubleshooting

Issue: The BESTA unit wobbles after leg installation.

Possible Cause: Legs are not evenly tightened or the floor surface is uneven.

• Solution 1: Check and retighten all leg screws. Ensure they are snug but not overtightened.
• Solution 2: If the floor is uneven, consider using furniture glides or shims under the legs to level the unit.

Issue: Leg appears loose or detached.

Possible Cause: Screw has come loose or mounting point is damaged.

• Solution 1: Re-tighten the screw. If the screw spins freely, the mounting hole may be stripped.
• Solution 2: If the mounting hole is stripped, consider using a larger screw (if compatible) or a wood filler to repair the hole before re-attaching the leg.

Specifications