1. Introduction
This manual provides essential information for the safe operation, assembly, and maintenance of your X-PRO X20 Fiji 150cc Gas Moped Street Scooter. Please read this manual thoroughly before operating the moped to ensure proper use and to prevent injury or damage. Retain this manual for future reference.
The X-PRO X20 Fiji 150cc moped is designed for commuting, short-distance travel, and recreational use on streets. It features a 150cc air-cooled, 4-stroke engine and 13-inch aluminum wheels.
2. Safety Information
WARNING: Operating this moped can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Always wear an approved helmet, eye protection, and appropriate protective clothing (long sleeves, long pants, gloves, and sturdy footwear) when operating the moped. Never operate the moped under the influence of alcohol or drugs. Adhere to all local traffic laws and regulations.
- Perform a pre-ride inspection before each use.
- Ensure all lights, brakes, and tires are in proper working condition.
- Do not exceed the maximum weight limit of 340 pounds.
- Familiarize yourself with all controls before riding.
3. Package Contents
Upon receiving your X-PRO X20 Fiji 150cc Moped, please verify that all components are present and undamaged. The package typically includes:
- X-PRO X20 Fiji 150cc Moped (partially assembled)
- Owner's Manual
- Manufacturer Statement of Origin (MSO) and Bill of Sale (sent separately)
- Tool Kit (may vary)
Image: X-PRO X20 Fiji 150cc Moped securely packaged in a metal crate, ready for assembly.
Image: Cardboard box containing the X-PRO X20 Fiji 150cc Moped, showing brand and model information.
4. Assembly
Your X-PRO X20 Fiji 150cc Moped requires some assembly upon arrival. Components typically requiring installation include the rear shock, handlebar, wheels, brakes, hub odometer counter, and battery. For detailed instructions, please refer to the assembly guide included in your package or consult the manufacturer's official assembly video if available on their website.
Ensure all fasteners are tightened to the manufacturer's specifications. Incorrect assembly can lead to unsafe operation and potential damage.
Image: Front view of the assembled X-PRO X20 Fiji 150cc Moped, highlighting the headlight and front wheel.
5. Operation
5.1 Pre-Ride Checks
Before each ride, perform the following checks:
- Fuel Level: Ensure adequate fuel.
- Tires: Check tire pressure and condition.
- Brakes: Verify front and rear brakes are functioning correctly.
- Lights: Test headlights, taillights, and turn signals.
- Controls: Ensure throttle, steering, and switches operate smoothly.
5.2 Starting the Moped
- Ensure the moped is on its center stand.
- Turn the ignition key to the 'ON' position.
- Apply the brake lever and press the electric start button. If the electric start fails, use the kick starter.
- Allow the engine to warm up for a short period before riding.
5.3 Break-in Period
The first 300 kilometers (approximately 186 miles) are crucial for the engine's longevity. During this break-in period, avoid prolonged full-throttle operation, rapid acceleration, and heavy loads. Vary your speed and engine RPMs to allow components to seat properly. Following the break-in guidelines in the full owner's manual will help ensure optimal performance and durability of your engine.
Image: Front-side view of the X-PRO X20 Fiji 150cc Moped in red, showcasing its design and features.
Image: Side view of the X-PRO X20 Fiji 150cc Moped, highlighting the seat, exhaust, and rear wheel.
6. Maintenance
Regular maintenance is vital for the performance, safety, and longevity of your moped. Refer to the complete owner's manual for a detailed maintenance schedule.
- Engine Oil: Check oil level regularly and change according to the maintenance schedule.
- Air Filter: Inspect and clean or replace the air filter as needed, especially in dusty conditions.
- Spark Plug: Inspect and clean or replace the spark plug periodically.
- Brakes: Check brake fluid levels (if applicable) and inspect brake pads for wear. Adjust as necessary.
- Tires: Maintain correct tire pressure and inspect for wear or damage.
- Battery: Check battery terminals for corrosion and ensure proper charge.
- Fasteners: Periodically check and tighten all nuts, bolts, and fasteners.
- Cleaning: Keep the moped clean to prevent corrosion and maintain appearance.
7. Troubleshooting
This section addresses common issues you might encounter. For complex problems, consult a qualified technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine does not start | No fuel, weak battery, fouled spark plug, kill switch engaged | Check fuel level, charge/replace battery, inspect/replace spark plug, disengage kill switch |
| Loss of power | Clogged air filter, improper fuel mixture, worn spark plug | Clean/replace air filter, adjust carburetor (professional service), replace spark plug |
| Brakes feel spongy | Air in brake lines, worn brake pads, low brake fluid | Bleed brake lines (professional service), replace brake pads, top up brake fluid |
| Speedometer inaccurate | Sensor malfunction, calibration issue | Consult manufacturer or use a GPS speedometer for accurate readings. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | X-PRO |
| Model Name | Fiji 150 (X20) |
| Engine Type | 150cc, Air-cooled, 4-stroke |
| Color | Red |
| Age Range (Description) | Adult |
| Weight Limit | 340 Pounds |
| Product Dimensions (L x W x H) | 72.8" x 28" x 44.4" |
| Number of Wheels | 2 |
| Wheel Material | Alloy Steel |
| Frame Material | Aluminum |
| Item Weight | 231 Pounds |
| Handlebar Type | Fixed |
| Wheel Size | 13 Inches |
| Wheel Type | Solid |
| Suspension Type | Rear Suspension |
| Brake Style | Disc/Drum |
| Special Features | Lights, Seat |
| Recommended Uses | Commuting, short-distance travel, recreational use on streets |
9. Warranty and Support
The X-PRO X20 Fiji 150cc Moped comes with a limited warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.
XPROUSA is committed to providing reliable support and parts for their vehicles. If you require replacement parts, technical assistance, or have any questions regarding your moped, please contact XPROUSA customer service directly. They maintain a stock of parts and a dedicated after-sales team to assist customers.
Additionally, protection plans may be available for purchase to extend coverage beyond the standard warranty. Examples include 2-Year Protection Plans or Complete Protect monthly plans. Check with your retailer for available options.
