1. Important Safety Instructions
Please read this manual carefully before operating the Ibiza Light PACKSLB001 system. Retain this manual for future reference.
- Electrical Safety: Always connect the system to a grounded power outlet. Ensure the voltage matches the product's requirements (240 Volts). Disconnect power before cleaning or servicing.
- Placement: Ensure adequate ventilation around all components. Do not expose units to rain or moisture. Keep away from flammable materials.
- Fog Machine Safety: Use only approved fog fluid. Do not ingest fog fluid. Ensure the fog machine is placed on a stable, heat-resistant surface. Do not block the fog output nozzle. Allow sufficient cool-down time after use.
- Truss Safety: Do not exceed the maximum load capacity of 50 kg for the DJ truss. Ensure all connections are secure before suspending lighting fixtures.
- Eye Safety: Avoid direct eye exposure to the light beams from the moving heads and LED projectors.
2. Product Overview
The Ibiza Light PACKSLB001 system is a comprehensive DJ lighting and fog solution designed for various events. It includes a robust DJ truss, two DMX moving heads, four DMX LED projectors, and a 900W fog machine with liquid.
Image 2.1: Overview of the Ibiza Light PACKSLB001 system, showing the truss, moving heads, LED projectors, and fog machine.
3. Setup Guide
3.1. DJ Truss Assembly (SLB001)
The DJ truss provides a stable structure for mounting your lighting fixtures.
- Unfold the tripods and adjust their spread for maximum stability.
- Insert the telescopic masts into the tripod bases and secure them.
- Attach the 120 cm removable T-bars to the top of the telescopic masts.
- Connect the horizontal truss sections between the two masts. Ensure the double reinforcement bars are correctly aligned and secured.
- Adjust the height of the truss between 150 cm and 300 cm as needed, securing all locking mechanisms.
Image 3.1: Diagram illustrating the assembly of the Ibiza Light SLB001 DJ Truss.
3.2. Moving Head Installation (PARTY-SPOT7)
Mount the two PARTY-SPOT7 moving heads onto the truss using appropriate clamps (not included) and the provided mounting brackets.
- Securely attach the moving heads to the truss, ensuring they are balanced and cannot fall.
- Connect the power cables to a suitable power source.
- Connect DMX cables if using DMX control (see Section 3.5).
Image 3.2: Front view of the Ibiza Light PARTY-SPOT7 Moving Head.
3.3. LED Projector Setup (RGB DMX)
Mount the four RGB DMX LED projectors onto the truss using their integrated mounting brackets or appropriate clamps.
- Position the projectors to achieve desired lighting coverage.
- Connect power cables. The projectors feature power input/output for daisy-chaining.
- Connect DMX cables if using DMX control (see Section 3.5).
Image 3.3: Four Ibiza Light RGB DMX LED Projectors.
3.4. Fog Machine Preparation (LSM900W)
Prepare the LSM900W fog machine for operation.
- Place the fog machine on a stable, level surface.
- Fill the fluid tank with the provided SMOKE1L fog liquid. Do not overfill.
- Connect the wired remote control to the designated port on the machine.
- Plug the fog machine into a grounded 240V power outlet.
Image 3.4: The Ibiza Light LSM900W Fog Machine with its wired and wireless remote controls.
3.5. DMX Connection
For advanced control, connect the lighting fixtures using DMX cables.
- Connect a DMX controller (not included) to the DMX IN port of the first fixture in the chain.
- Connect the DMX OUT of the first fixture to the DMX IN of the next fixture, and so on.
- Ensure each fixture is assigned a unique DMX address. Refer to the individual fixture's display or manual for address setting instructions.
4. Operating Instructions
4.1. Moving Head Operation (PARTY-SPOT7)
The PARTY-SPOT7 moving heads offer multiple operating modes:
- DMX512 Mode: Use a DMX controller to control pan, tilt, gobos, and colors. Select 7 or 10 DMX channels on the fixture's display.
- Automatic Mode: The fixture will cycle through its 8 integrated programs.
- Sound-Controlled Mode: The fixture reacts to ambient sound via its built-in microphone.
- Master-Slave Mode: Connect multiple PARTY-SPOT7 units. Set one as 'Master' and others as 'Slave' for synchronized operation.
4.2. LED Projector Operation (RGB DMX)
The RGB DMX LED projectors also feature various operating modes:
- DMX Mode: Control RGB colors and effects using a DMX controller (7 channels).
- Musical Mode: Lights react to sound.
- Auto Mode: Built-in programs for automatic color changes and effects.
- Master-Slave Mode: Synchronize multiple LED projectors.
4.3. Fog Machine Operation (LSM900W)
After plugging in the fog machine, allow it to warm up. The heating element has temperature regulation.
- Warm-up: The machine will take a few minutes to reach operating temperature. An indicator light on the remote will signal readiness.
- Wired Remote: Press the button on the wired remote to activate fog output.
- Wireless Remote: Use the wireless remote for convenient operation.
- Continuous Use: The maximum continuous fog output duration is 2 minutes. Allow the machine to reheat between bursts.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your system.
- Cleaning: Periodically clean the exterior of all units with a soft, dry cloth. Ensure no dust or debris accumulates in ventilation openings.
- Fog Machine: If the fog machine will not be used for an extended period, empty the fluid tank and run a small amount of distilled water through the system to prevent clogs.
- Fluid: Always use high-quality, water-based fog fluid. Using incompatible fluids can damage the machine.
- Inspection: Regularly check all cables, connections, and mounting hardware for wear or damage. Replace any damaged components immediately.
6. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to unit | Power cable disconnected, faulty outlet, blown fuse | Check power connections, try a different outlet, inspect/replace fuse. |
| Fog machine not producing fog | No fluid, insufficient warm-up, clogged nozzle | Fill fluid tank, wait for warm-up indicator, clean nozzle (refer to maintenance). |
| Lighting fixtures not responding to DMX | Incorrect DMX addressing, faulty DMX cable, DMX controller issue | Verify DMX addresses, check DMX cable connections, test with another DMX controller. |
| Moving head not moving | Motor issue, DMX signal problem, stuck in a mode | Check DMX signal, try different operating modes (Auto, Sound), power cycle the unit. |
7. Specifications
| Component | Specification |
|---|---|
| Overall System | |
| Model Number | PACKSLB001 |
| Manufacturer | LOTRONIC |
| Dimensions (L x W x H) | 80 x 80 x 400 cm (assembled truss) |
| Weight | 26 kg |
| Connectivity | DMX |
| Material | Alloy Steel, Plastic |
| DJ Truss (SLB001) | |
| Material | Steel |
| Max Height | 400 cm |
| Length between masts | 200 cm |
| Max Load | 50 kg |
| Tube Diameter | 38 mm |
| Moving Heads (PARTY-SPOT7) | |
| Light Source | 10W White LED |
| DMX Channels | 7 or 10 |
| Features | Pan & Tilt, Gobo & Color Disc |
| LED Projectors (RGB DMX) | |
| Light Source | 18x 1W RGB LEDs |
| Colors | Red, Green, Blue |
| DMX Channels | 7 |
| Fog Machine (LSM900W) | |
| Power | 900 Watts |
| Voltage | 240 Volts |
| Max Continuous Use | 2 minutes |
| Controls | Wired and Wireless Remotes |
8. Warranty and Support
This product is covered by a 2-year warranty. Spare parts availability is also guaranteed for 2 years from the date of purchase.
For technical support or warranty claims, please contact our customer service:
- Phone: 03-44-02-72-88
- Please have your model number (PACKSLB001) and proof of purchase ready when contacting support.
