1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your Miroir M190 Mini Projector. Please read this manual thoroughly before using the device and retain it for future reference.
Package Contents
Verify that all items are present in the package:
- Miroir M190 Mini Projector
- HDMI Cable
- USB Video and Charging Cable
- AC Adapter and Charger
- Quick Start Guide (refer to this manual for full details)
Image 1.1: Miroir M190 Projector and included accessories.
2. Product Overview
Familiarize yourself with the various components and ports of your Miroir M190 Mini Projector.
Front View
Image 2.1: Front view of the Miroir M190. This view shows the projection lens and the manual focus wheel on the side.
- Projection Lens: Emits the image onto the projection surface.
- Focus Wheel: Adjusts the clarity of the projected image.
Rear View (Ports)
Image 2.2: Rear view of the Miroir M190, detailing the connectivity ports.
- DC IN: Power input port for the AC adapter.
- HDMI: Connects to HDMI-enabled devices for video and audio input.
- USB-C: Supports video input and charging.
- USB 5V OUT: Provides 5V power output for charging external devices or powering streaming sticks.
- AUDIO: 3.5mm audio output jack for external speakers or headphones.
Top View (Controls)
Image 2.3: Top view of the Miroir M190, showing the touch-sensitive control buttons.
- Power/Lens Cover: Sliding cover acts as the power switch. Slide to open/close.
- Volume Down (-): Decreases audio volume.
- Mode (M): Toggles between brightness modes (e.g., Normal, ECO).
- Volume Up (+): Increases audio volume.
Integrated Kickstand
Image 2.4: The Miroir M190 with its integrated kickstand extended for angled projection.
The M190 features a built-in kickstand that allows for flexible projection angles, including upward projection for ceiling viewing. Extend the kickstand from the bottom of the projector to adjust the tilt.
3. Setup
Charging the Projector
- Connect the AC adapter to the "DC IN" port on the projector.
- Plug the AC adapter into a power outlet.
- The charging indicator light will illuminate. A full charge typically takes approximately 2-3 hours. The projector can operate for up to 2 hours on battery power.
Note: The projector can be used while charging.
Powering On/Off
- To power on, slide the lens cover open. The projector will automatically begin its startup sequence.
- To power off, slide the lens cover closed.
Focus Adjustment
After powering on, adjust the focus wheel located near the lens until the projected image is clear and sharp.
Positioning the Projector
Place the projector on a stable, flat surface. Use the integrated kickstand to adjust the vertical projection angle as needed. The projector features automatic vertical keystone correction to maintain a rectangular image.
Image 3.1: Recommended projection distances for various screen sizes.
Refer to the diagram above for approximate projection distances and corresponding screen sizes. Optimal viewing experience depends on ambient light conditions.
4. Operating Instructions
Connecting Input Sources
The Miroir M190 supports video input via HDMI and USB-C.
- HDMI Connection:
- Connect one end of the HDMI cable to the HDMI port on the projector.
- Connect the other end to the HDMI output port of your source device (e.g., laptop, streaming stick, game console).
- USB-C Connection:
- Connect the USB-C cable to the USB-C port on the projector.
- Connect the other end to a compatible USB-C video output port on your source device (e.g., smartphone, tablet, laptop).
The projector should automatically detect the input source. If not, try disconnecting and reconnecting the cable.
Audio Output
- Built-in Speaker: The projector has a built-in 3-watt speaker for audio playback.
- External Audio: For enhanced audio, connect external speakers or headphones to the 3.5mm AUDIO output jack.
Volume Control
Use the - and + touch buttons on the top of the projector to adjust the audio volume.
Brightness Mode
Press the M (Mode) touch button on the top of the projector to cycle through available brightness modes (e.g., Normal, ECO). ECO mode conserves battery life and extends lamp lifespan.
5. Maintenance
- Lens Cleaning: Gently wipe the projector lens with a soft, lint-free cloth or a lens cleaning brush. Avoid using abrasive materials or harsh chemicals.
- Ventilation: Ensure the projector's ventilation grilles are clear of obstructions to prevent overheating. Do not block the air vents during operation.
- Storage: When not in use, store the projector in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery longevity, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to approximately 50% every few months.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image projected. |
|
|
| Image is blurry. |
|
|
| No sound. |
|
|
| Battery not charging. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | M190 |
| Display Technology | DLP |
| Native Resolution | 854 x 480 (FWVGA) |
| Input Resolution Supported | Up to 1080p |
| Lamp Type | LED |
| Lamp Lifespan | Up to 20,000 hours (Normal mode), 30,000 hours (ECO mode) |
| Connectivity | HDMI, USB-C (Video & Charge) |
| Audio Output | 3.5mm Audio Jack, Built-in 3-watt Speaker |
| Battery Type | Lithium Polymer (included) |
| Battery Life | Up to 2 hours |
| Product Dimensions | 4.13 x 6.63 x 1.13 inches |
| Item Weight | 1.04 pounds |
| Special Features | Built-in Kickstand, Automatic Vertical Keystone Correction |
8. Warranty and Support
Miroir products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official Miroir website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Miroir customer service. You can find contact details on the official Miroir website or through your retailer.
Online Support: Visit the Miroir Store on Amazon for additional product information and support resources.
