1. Introduction
This manual provides essential information for the safe and effective use of your HASWING Cayman B 50700 Electric Trolling Motor. Please read these instructions thoroughly before installation, operation, or maintenance to ensure proper function and longevity of the product. Retain this manual for future reference.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in electric shock, fire, serious injury, or property damage.
- Always disconnect the motor from the battery before performing any maintenance, cleaning, or propeller work.
- Ensure all electrical connections are secure and properly insulated to prevent short circuits.
- Do not operate the motor if the propeller is obstructed or if the motor unit is damaged.
- Keep hands, feet, and clothing clear of the propeller at all times, especially during operation.
- Use only a 12V deep cycle marine battery with the recommended capacity (105AH minimum).
- Avoid submerging the motor head or control unit in water.
- Mount the motor securely to the boat's bow according to the installation instructions.
- Do not use this motor in areas where swimming is permitted or where people may be in the water near the propeller.
3. Package Contents
Verify that all items listed below are present in your product packaging:
- HASWING Cayman B Trolling Motor Unit (12V 55LB 48 Inch Shaft)
- Wireless Remote Control
- Propeller (3-blade, 9.3 inch diameter)
- Propeller Nut and Pin
- Mounting Hardware (bolts, washers, nuts)
- Instruction Manual (this document)
4. Product Overview and Components
The HASWING Cayman B 50700 is a bow-mount electric trolling motor designed for both saltwater and freshwater use. It features variable speed control and wireless remote operation.
Figure 4.1: HASWING Cayman B 50700 Trolling Motor and Wireless Remote Control.
4.1 Key Components
- Motor Head: Contains the control electronics and power reader.
- Shaft: 48-inch cast aluminum alloy shaft connecting the motor head to the lower unit.
- Depth Collar: Adjustable collar on the shaft to set the motor's depth.
- Lower Unit: Houses the electric motor and propeller.
- Propeller: 3-blade design for efficient thrust.
- Bow Mount: Mechanism for attaching the motor to the boat's bow.
- Stow/Deploy Pedal: Lever for raising and lowering the motor.
- Wireless Remote Control: For wireless operation of speed and steering.
Figure 4.2: Detailed diagram illustrating the components and key specifications of the Cayman B 50700 trolling motor.
4.2 Power Reader Display
The motor head features an LED power reader display to indicate the battery's charge status. This allows for convenient monitoring of battery life during use.
Figure 4.3: LED Power Reader Display indicating battery charge levels.
5. Setup and Installation
5.1 Mounting the Trolling Motor
- Positioning: Place the trolling motor on the bow of your boat. Ensure the mounting bracket is positioned to allow the motor to deploy and stow without obstruction. The motor should be centered or slightly offset to one side, depending on your boat's design.
- Marking Holes: Once the desired position is determined, mark the drilling locations for the mounting bolts through the base of the mounting bracket.
- Drilling: Drill appropriate size holes for the mounting bolts. Use caution to avoid damaging any internal boat structures.
- Securing the Mount: Attach the mounting bracket to the boat using the provided bolts, washers, and nuts. Ensure all fasteners are tightened securely. Consider using a backing plate for added stability if your boat's deck material is thin.
Figure 5.1: Bow mount bracket for securing the trolling motor to the boat.
5.2 Battery Connection
Connect the trolling motor's power cables directly to a 12V deep cycle marine battery. Observe correct polarity: red cable to the positive (+) terminal and black cable to the negative (-) terminal. Ensure connections are tight and corrosion-free. It is recommended to install an appropriate circuit breaker (not included) in the positive line near the battery for protection.
5.3 Propeller Installation
- Align the propeller with the shaft pin.
- Slide the propeller onto the shaft, ensuring the pin engages the propeller slot.
- Thread the propeller nut onto the shaft and tighten it firmly by hand. Do not overtighten.
Figure 5.2: The 3-blade propeller, ready for installation.
6. Operating Instructions
6.1 Deploying and Stowing the Motor
To deploy the motor, press the stow/deploy pedal and gently lower the motor into the water until the propeller is at the desired depth. Use the depth collar to adjust the shaft depth. To stow, press the pedal and lift the motor out of the water, securing it in the stowed position.
Figure 6.1: Adjustable depth collar on the motor shaft.
6.2 Wireless Remote Control Functions
The wireless remote control allows for convenient operation from anywhere on the boat. Ensure the remote is paired with the motor before use (refer to the pairing instructions in the full manual, if provided separately).
Figure 6.2: Wireless Remote Control layout and functions.
- Power ON/OFF: Activates or deactivates the motor.
- Speed Up / Speed Down: Adjusts the motor's thrust incrementally.
- Full Speed (F.Speed): Engages maximum thrust.
- Turn Left / Turn Right: Controls the 360-degree electric steering.
- Reboot Key (Reset): Used for resetting the remote connection or motor.
- Indicator Light: Provides feedback on remote status.
6.3 Speed Control
The motor features variable speed control. Use the 'Speed Up' and 'Speed Down' buttons on the remote to precisely adjust your desired speed. The motor is designed for smooth, stepless speed adjustments.
6.4 Steering
The motor offers 360-degree electric steering. Use the 'Turn Left' and 'Turn Right' buttons on the remote to navigate. The motor will respond quickly to steering commands.
7. Maintenance
Regular maintenance ensures optimal performance and extends the life of your trolling motor.
7.1 After Each Use
- Rinse the motor unit, especially the lower unit and propeller, with fresh water to remove salt, dirt, and debris.
- Inspect the propeller for any fishing line, weeds, or damage. Remove any obstructions.
- Check all electrical connections for tightness and corrosion. Clean if necessary.
7.2 Periodic Maintenance
- Propeller Inspection: Regularly check the propeller for nicks, cracks, or bends. A damaged propeller can reduce efficiency and cause vibration. Replace if necessary.
- Shaft and Mount: Inspect the shaft for any signs of bending or damage. Ensure the bow mount remains securely fastened to the boat.
- Battery Care: Keep your deep cycle battery charged and maintained according to the battery manufacturer's instructions.
- Storage: When not in use, store the trolling motor in a dry, protected area. If storing for extended periods, disconnect the battery.
8. Troubleshooting
This section addresses common issues you might encounter with your trolling motor.
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not turn on. | Low battery charge, loose battery connection, remote not paired. | Check battery charge, tighten battery terminals, re-pair remote control. |
| Motor runs but has low thrust. | Damaged propeller, weeds/fishing line on propeller, low battery. | Inspect and clean/replace propeller, check battery charge. |
| Motor makes unusual noise or vibrates. | Damaged propeller, bent shaft, debris in lower unit. | Inspect propeller for damage, check shaft for bends, clear debris. |
| Remote control not responding. | Remote battery low, remote not paired, interference. | Replace remote battery, re-pair remote, move away from sources of interference. |
| Motor steering is erratic. | Loose connections in steering mechanism, remote issue. | Check wiring, re-pair remote. |
9. Specifications
Technical details for the HASWING Cayman B 50700 Electric Trolling Motor.
| Feature | Specification |
|---|---|
| Model | 50700 |
| Power of Thrust | 55 lbs |
| Max Voltage | DC 12V |
| Power - Max | 600W |
| Amp - Max | 50A |
| Depth Adjustment | Depth Collar |
| Prop Type/Size | 3-blade prop / 9.3 inch diameter |
| Prop Speed at Full Power | Max. 1250 rpm underwater |
| Battery Type Required | 1 x 105AH deep cycle (minimum) |
| Steering | 360 degree control |
| Decibel Level (db) | <50db |
| Weight (N.W.) | 37 pounds (16.8 kg) |
| Shaft Type | Cast Aluminum |
| Shaft Length | 48 inches (1220mm) |
| Max Boat Length (Suggestion) | 18 feet (5.5m) |
| Material | Aluminum, Stainless Steel |
| Manufacturer | HASWING |
| UPC | 808229966622 |
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact HASWING customer service directly. Keep your proof of purchase for warranty claims.
