Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Millennium Lighting 9332-SN Traditional Vanity Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Millennium Lighting 9332-SN is a two-light vanity fixture designed for indoor use, featuring a satin nickel finish and metal construction. It is suitable for damp locations and is UL listed for safety.
Image: The Millennium Lighting 9332-SN Traditional Vanity Light, showcasing its satin nickel finish and two frosted glass shades.
Important Safety Instructions
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Use only UL or ETL listed wire connectors.
- This product is intended for indoor use only.
- Do not exceed the maximum wattage specified for the light bulbs.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling.
Package Contents
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture.
- Light Fixture Assembly (1)
- Glass Shades (2)
- Mounting Hardware Kit (includes mounting strap, outlet box screws, wire connectors, ground screw) (1)
Setup and Installation
Tools Required (Not Included)
- Phillips Head Screwdriver
- Flat Head Screwdriver
- Wire Strippers
- Pliers
- Electrical Tape
Step-by-Step Installation
- Turn Off Power: Before starting installation, ensure the power to the electrical outlet box is turned off at the circuit breaker or fuse box.
- Prepare Mounting Strap: Attach the mounting strap to the outlet box using the provided outlet box screws. Ensure the strap is securely fastened.
- Make Electrical Connections:
- Connect the bare copper ground wire from the fixture to the ground wire from the outlet box (usually bare copper or green) using a wire connector. Secure the ground wire to the mounting strap with the green ground screw.
- Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire connector.
- Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire connector.
- Wrap all wire connections with electrical tape for added security.
- Mount Fixture: Carefully tuck all wires into the outlet box. Align the fixture's backplate with the mounting strap and secure it with the provided mounting screws.
- Install Light Bulbs: Insert the recommended light bulbs (not included) into the sockets. Do not exceed 100 watts per bulb.
- Attach Glass Shades: Secure the glass shades to the fixture according to the specific design (e.g., by threading a ring or using set screws). Ensure they are snug but do not overtighten.
- Restore Power: Once installation is complete, restore power at the circuit breaker or fuse box.
Operating Instructions
The Millennium Lighting 9332-SN vanity light operates via a standard wall switch (not included). Once installed and power is restored, use the wall switch to turn the light fixture on or off.
- Bulb Type: This fixture requires two incandescent or compatible LED bulbs.
- Wattage: Each bulb socket supports a maximum of 100 watts. Do not exceed this limit to prevent overheating and potential damage.
Maintenance
Care and Cleaning
- Always disconnect power before cleaning.
- To clean the fixture, wipe it with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Clean glass shades with a mild glass cleaner and a soft cloth.
Bulb Replacement
- Ensure power is off at the circuit breaker before replacing bulbs.
- Allow bulbs to cool completely before touching them.
- Unscrew the old bulb and screw in a new bulb of the same type and wattage (max 100W).
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light | 1. Power is off 2. Faulty bulb 3. Incorrect wiring | 1. Check circuit breaker/fuse 2. Replace bulb 3. Verify wiring connections (consult electrician if unsure) |
| Bulbs burn out quickly | 1. Incorrect bulb wattage 2. Voltage fluctuations | 1. Use bulbs within specified wattage (max 100W) 2. Consult electrician to check household voltage |
| Light flickers | 1. Loose bulb 2. Loose wiring connection | 1. Tighten bulb 2. Check and secure wiring connections (power off first) |
Product Specifications
| Specification | Detail |
|---|---|
| Brand | Millennium Lighting |
| Model Number | 9332-SN |
| Finish | Satin Nickel |
| Material | Metal |
| Fixture Type | Vanity Light |
| Dimensions (H x W) | 8.00 inches x 12.00 inches |
| Wattage (Max) | 100 watts per socket |
| Power Source | Corded Electric |
| Safety Rating | Damp, UL Listed |
| Item Weight | 5 pounds |
Warranty and Support
Warranty Information
This Millennium Lighting product is covered by a manufacturer's warranty. Please refer to the warranty documentation included with your purchase or contact Millennium Lighting directly for specific terms and conditions.
Customer Support
For technical assistance, missing parts, or warranty claims, please contact Millennium Lighting customer support. Contact information can typically be found on the product packaging or the manufacturer's official website.
