BOND BD-1750

Download PDF
Contents

BOND BRIDGE PRO Instruction Manual

Model: BD-1750

1. Product Overview

The BOND BRIDGE PRO is a device designed to integrate your existing remote-controlled ceiling fans, motorized shades, and fireplaces into your smart home system. It converts RF (Radio Frequency) signals from your traditional remote controls into Wi-Fi or Ethernet commands, allowing control via a smartphone app, voice assistants like Alexa and Google Home, and other smart home platforms. This device supports a wide range of frequencies (300-450MHz) and offers extended coverage for larger homes.

Front view of the BOND BRIDGE PRO, a white, circular device with a blue illuminated ring in the center.

Image: Front view of the BOND BRIDGE PRO.

Back view of the BOND BRIDGE PRO showing the Ethernet (with PoE) port, Micro USB port, and reset button.

Image: Back view of the BOND BRIDGE PRO with its connectivity ports.

2. Setup and Installation

2.1 Physical Installation

The BOND BRIDGE PRO can be powered via Power over Ethernet (PoE) through its Ethernet port or by a 5V USB power adapter (not included). For optimal performance, place the device in a central location within the area where your remote-controlled devices are located. It supports both wall and ceiling mounting.

2.2 App Installation and Initial Configuration

  1. Download the BOND Home application from your device's app store.
  2. Open the app and create an account or log in.
  3. Tap the '+' icon to add a new device.
  4. Select 'Bond Bridge Pro' from the list of devices.
  5. Choose your preferred connection type: Ethernet or Wi-Fi.
  6. Follow the on-screen prompts to complete the setup. Ensure your Bond Bridge Pro's indicator light is solid green before proceeding.

Video: This video demonstrates how to set up the Bond Bridge Pro using an Ethernet connection through the Bond Home app.

2.3 Pairing Devices

The BOND BRIDGE PRO learns the RF signals from your existing remote controls. This process involves teaching the Bridge Pro each command from your remote.

2.3.1 Pairing a Ceiling Fan

  1. In the Bond Home app, select your Bond Bridge Pro.
  2. Tap the '+' icon to add a new device and select 'Ceiling Fan'.
  3. Choose 'Non-Smart Ceiling Fan' if you are using a traditional remote.
  4. Follow the app's instructions to record signals from your ceiling fan remote (e.g., light on/off, fan speed). The Bridge Pro's light will flash and turn solid green when a signal is successfully captured.
  5. Test the recorded commands to ensure proper functionality.

Video: This video demonstrates the process of pairing a ceiling fan remote control with the Bond Bridge Pro using the Bond Home app.

2.3.2 Pairing Motorized Shades

  1. In the Bond Home app, select your Bond Bridge Pro.
  2. Tap the '+' icon to add a new device and select 'Shades, Blinds, Windows & Awnings'.
  3. Choose the specific motor technology of your shade (e.g., Somfy, Rollease Acmeda).
  4. Follow the app's instructions to put your shade into pairing mode (often by pressing a button on the shade or its remote) and then send a signal from the Bond Bridge Pro.
  5. Test the shade control (up, down, stop) through the app.

Video: This video illustrates how to pair a motorized shade with the Bond Bridge Pro using the Bond Home app.

3. Operation

3.1 Controlling Devices

Once paired, you can control your devices directly from the Bond Home app. The app provides an interface to activate functions such as turning lights on/off, adjusting fan speeds, and raising/lowering shades. You can also set schedules and group devices for simultaneous control.

An illustration showing a Bond Bridge Pro centrally located in a house, indicating its ability to control up to 50 devices within a 3,500 sq. ft. range.

Image: The Bond Bridge Pro can control up to 50 devices within a 3,500 sq. ft. area.

3.2 Smart Home Integrations

The BOND BRIDGE PRO is compatible with various smart home ecosystems, including Amazon Alexa, Google Home, SmartThings, Josh.ai, and Savant. It also offers third-party drivers for Control4, Crestron, URC, and RTI, allowing for advanced integration into professional automation systems.

3.3 Range and Capacity

A single Bond Bridge Pro unit can control up to 50 devices within an area of approximately 3,500 square feet. For larger homes or areas with signal interference, multiple Bond Bridge Pro units can be deployed to extend coverage and ensure reliable operation.

An illustration of a multi-story house with multiple Bond Bridge Pro devices placed on different floors to improve signal range and coverage.

Image: Multiple Bond Bridge Pro units can be used to improve range in larger homes.

4. Maintenance

To ensure optimal performance, keep your Bond Bridge Pro's firmware updated through the Bond Home app. Regularly check for app updates to access new features and improvements. Keep the device clean and free from dust. Avoid placing it near sources of strong electromagnetic interference.

5. Troubleshooting

5.1 Common Issues

  • Device Unresponsive: Ensure the Bond Bridge Pro is powered on and connected to your network (solid green light). Check the distance to the controlled device and any potential obstructions.
  • Firmware Update Problems: If a firmware update causes issues, a factory reset might be necessary. Refer to the app or support for specific instructions.
  • Schedules Disabled After Power Outage: Some users have reported that automated schedules may be disabled after a power outage or reboot. Manually re-enable or reconfigure schedules in the app if this occurs.
  • Hub Shuts Down: Controlling too many devices too quickly may cause the hub to temporarily shut down. Allow a brief pause between commands for multiple devices.

5.2 Contacting Support

For further assistance, the Bond Home app provides direct access to customer support. You can chat with a live agent through the app's Help Center. Support is available 12 hours a day, 7 days a week.

Video: This video demonstrates how to access and use the customer support chat feature within the Bond Home application.

6. Specifications

FeatureDetail
BrandBOND
Model NameBD-1750
ColorWhite
Power SourcePoE (Power over Ethernet)
ConnectivityEthernet, 2.4 GHz Wi-Fi
Control MethodApp (smartphones), Remote, Voice (Amazon Echo, Google Home)
RangeUp to 3,500 sq. ft.
Device CapacityUp to 50 devices
Dimensions6.2 x 5.7 x 1.4 inches
Item Weight1.57 pounds (0.71 Kilograms)
Indoor/Outdoor UsageIndoor
Mounting TypeCeiling Mount
MaterialPlastic
UPC860509000426

7. Warranty and Support Information

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official BOND website. For technical support and troubleshooting, utilize the in-app Help Center to chat with a customer support agent. Support is available 12 hours a day, 7 days a week.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.