Introduction
This manual provides comprehensive instructions for assembling, operating, and maintaining your CaDA Humvee 1:12 Scale Off-Road Vehicle Model C61036W building kit. This 1:12 scale replica is designed for enthusiasts and collectors, offering a detailed construction experience. Please read carefully before beginning assembly.
Safety Information
WARNING: CHOKING HAZARD—Small parts. Not intended for children under 3 years.
Recommended age for assembly: 14 years and up. Adult supervision is recommended for younger builders.
Package Contents
Before starting assembly, verify that all components are present.
- 1380 Building Pieces
- Comprehensive Colored Step-by-Step Instruction Manual
- HUMVEE Nameplate
If any parts are missing or damaged, please contact CaDA customer support.
Setup and Assembly
The CaDA Humvee model kit consists of 1380 pieces. Follow the included colored step-by-step instruction manual for a smooth assembly process.
- Preparation: Unpack all components and organize them by type or color as suggested in the instruction manual. Ensure a clean, well-lit workspace.
- Step-by-Step Construction: Refer to the detailed instruction manual provided. Each step is illustrated to guide you through the building process.
- Component Fit: Ensure all pieces fit securely. If a piece does not fit easily, double-check the instruction manual to confirm correct placement and orientation. Avoid forcing pieces together.
- Structural Integrity: Pay close attention to the structural connections, especially around areas like door frames and the engine hood, to ensure stability.
Tip: Some users have noted that ensuring pieces fit well is crucial for overall model stability. If you encounter difficulty, re-examine the instructions for that specific step.
Image: The CaDA Humvee 1:12 Scale Off-Road Vehicle Model kit box alongside the fully assembled white model.
Image: The CaDA Humvee 1:12 Scale Off-Road Vehicle Model kit box, open to show the internal packaging and a schematic diagram of the vehicle.
Operating the Model
Once assembled, your CaDA Humvee model features several interactive elements:
- Doors: All four doors can be opened to view the detailed interior.
- Seats: Front and rear seats are adjustable.
- Trunk and Hood: The trunk and hood can be opened to reveal the transmission structure and engine bay.
- Suspension: The model features rear-wheel drive with functional suspension springs.
Optional RC Power System: This model is compatible with an optional RC power system (not included). Refer to the separate instructions provided with the RC power system for installation and operation.
Image: Rear three-quarter view of the assembled CaDA Humvee model, showcasing the rear lights and trunk area.
Image: Front three-quarter view of the assembled CaDA Humvee model, highlighting the front grille, headlights, and hood.
Maintenance
To ensure the longevity and appearance of your CaDA Humvee model:
- Cleaning: Dust the model regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
- Handling: Handle the model with care, especially when opening movable parts, to avoid accidental damage.
Troubleshooting
- Missing Pieces: If you discover missing pieces during assembly, please contact CaDA customer support with details of the missing parts.
- Parts Not Fitting:
- Double-check the instruction manual to ensure the correct parts are being used and are oriented correctly.
- Ensure that previous steps were assembled securely and correctly, as misalignment in earlier steps can affect later fits.
- Avoid forcing pieces, as this can cause damage.
- Flimsy Construction: Some areas, like door frames, may require careful assembly to ensure stability. Ensure all connections are firmly pressed together. If issues persist, review the relevant assembly steps.
Specifications
| Feature | Detail |
|---|---|
| Model Number | C61036W |
| Scale | 1:12 |
| Number of Pieces | 1380 |
| Product Dimensions | 12.09 x 4.13 x 14.96 inches |
| Product Weight | 5.38 Pounds |
| Recommended Age | 14 years and up |
| Material | High-quality, eco-friendly, non-toxic ABS |
| Certifications | ROHS, RED, Reach |
| Drive Type | Rear-wheel drive with suspension springs |
Warranty and Support
CaDA products are manufactured to high-quality standards. For any questions regarding assembly, missing parts, or product functionality, please contact CaDA customer support. Refer to the product packaging or the official CaDA website for specific warranty information and contact details.
