Introduction
Thank you for choosing the YISSVIC MK1000 GS-W 4-in-1 Electric Milk Frother. This appliance is designed to help you create a variety of milk-based beverages, including hot dense foam, light and soft foam, cold foam, and heated milk, all with ease. Please read this manual carefully before first use to ensure proper operation, safety, and maintenance.
Important Safety Instructions
- Read all instructions before using the appliance.
- Do not immerse the main unit in water or other liquids to prevent electric shock. The main unit of the device cannot be rinsed with water; otherwise, the internal circuit will be damaged.
- Ensure the power supply voltage matches the rating label on the appliance.
- This appliance features an automatic shut-off and temperature protection design for safer use.
- The food-grade double-wall thermal insulation and ecological non-stick interior coating enhance durability.
- The anti-slip silicone pad on the bottom prevents the product from sliding during use.
- Keep the appliance out of reach of children.
- Always unplug the frother when not in use and before cleaning.
- Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
Product Overview
The YISSVIC MK1000 GS-W Electric Milk Frother is designed for convenience and versatility. It features a sleek design with intuitive controls.
Figure 1: YISSVIC MK1000 GS-W Electric Milk Frother. This image shows the main unit with its control buttons and a visual representation of milk being frothed.
The frother includes a sturdy base with a 360-degree rotatable thermostat connection for flexible placement and a non-slip silicone pad for stability.
Figure 2: Frother base and whisk connection. This image highlights the stable non-slip base and the flexible 360-degree rotatable thermostat connection.
The appliance comes with two whisk attachments: one for frothing and one for heating milk without frothing.
Figure 3: Whisk attachments. This image displays the two types of whisks included for different functions.
Setup
- Unpack the milk frother and all its components.
- Before first use, clean the interior of the frother and the whisk attachments as described in the "Cleaning and Maintenance" section.
- Place the frother on a stable, flat, and dry surface.
- Ensure the correct whisk attachment is securely placed at the bottom of the frother jug for your desired function.
Operating Instructions
The YISSVIC MK1000 GS-W offers four distinct functions, easily selected with a single button.
Figure 4: Four-in-one function overview. This diagram visually explains each of the four functions: hot dense foam, hot light foam, hot milk, and cold dense foam.
To operate the frother:
- Select Whisk: Use the frothing whisk for foam functions and the heating whisk for hot milk without foam. Ensure the whisk is securely attached.
- Add Milk: Pour milk into the frother. Observe the clear internal markings for maximum and minimum levels.
- For frothing (hot or cold foam): Do not exceed the 150 ml (5.1 oz) MAX frothing line.
- For heating milk (without foam): Do not exceed the 300 ml (10.2 oz) MAX heating line.
- Always add at least the 75 ml (2.5 oz) MIN liquid level.
Figure 5: Capacity markings. This image shows the internal markings for maximum milk levels for frothing and heating, as well as the minimum liquid level.
- Close Lid: Place the lid securely on the frother.
- Connect Power: Plug the power cord into an electrical outlet.
- Select Function: Press the "FUNCTION" button repeatedly to cycle through the desired modes. The indicator light will change to reflect the selected function.
- Start Operation: Press the "ON/OFF" button to start the frothing/heating process. The indicator light will illuminate (e.g., red for hot functions).
Figure 6: Control panel with illuminated indicator. This image shows the function and ON/OFF buttons, with the ON/OFF button illuminated in red, indicating operation.
- Automatic Shut-off: The frother will automatically stop when the process is complete (typically 50-120 seconds for frothing).
- Serve: Carefully remove the lid and pour the frothed or heated milk.
Figure 7: Pouring frothed milk. This image demonstrates pouring perfectly frothed milk into a cup for a beverage.
Tip: For best frothing results, it is recommended to use whole milk with a fat content greater than 3%.
Cleaning and Maintenance
Regular cleaning ensures the longevity and hygiene of your milk frother. The non-stick interior coating makes cleaning easy.
- Unplug: Always unplug the appliance from the power outlet before cleaning.
- Cool Down: Allow the frother to cool down completely after use.
- Clean Interior: The interior of the frother can be cleaned with a soft, damp cloth. For thorough rinsing, add approximately 150 ml of water, heat it briefly (without frothing), and then stir to rinse. Discard the water and wipe dry.
Figure 8: Cleaning the frother interior. This image shows the interior of the frother being rinsed under running water. Remember not to immerse the main unit.
- Whisk Attachments: Remove the whisk attachments and wash them with warm, soapy water. Rinse thoroughly and dry.
- Exterior: Wipe the exterior of the frother with a damp cloth. Do not use abrasive cleaners or scourers.
- Important: Never immerse the main unit or its electrical base in water or any other liquid. This will damage the internal circuitry. The frother is not dishwasher safe.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Frother does not turn on. | Not plugged in; power outage; appliance malfunction. | Ensure the frother is securely plugged into a working outlet. Check your circuit breaker. If the issue persists, contact customer support. |
| Milk is not frothing or heating properly. | Incorrect whisk; insufficient or excessive milk; type of milk; whisk not properly secured. | Ensure the correct whisk is used for the desired function. Check milk levels against MAX/MIN markings. Use fresh, cold whole milk (fat content > 3%) for best frothing. Ensure the whisk is firmly attached to the bottom of the jug. |
| Whisk detaches when pouring. | Whisk not properly secured. | Before each use, ensure the whisk is firmly pressed onto its spindle at the bottom of the frother jug. |
| Milk overflows. | Too much milk added. | Do not exceed the MAX fill lines for frothing (150ml) or heating (300ml). Milk expands when heated and frothed. |
Specifications
- Brand: YISSVIC
- Model Number: MK1000 GS-W
- Color: White
- Dimensions: 25.3 x 20.4 x 15.7 cm (Package)
- Capacity: 300 Milliliters (Heating), 150 Milliliters (Frothing)
- Power: 600 Watts
- Material: Stainless Steel (Interior), Non-stick coating
- Item Weight: 1.13 Kilograms
- Power Source: Corded Electric
Warranty and Customer Support
YISSVIC is committed to providing reliable and high-quality products to its customers. If you have any questions, concerns, or require assistance with your YISSVIC MK1000 GS-W Electric Milk Frother, please do not hesitate to contact us through Amazon's customer service platform. Our team is ready to assist you.
