Introduction
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Lexicon Cottage 23" Counter Height Chair. Please read these instructions carefully before beginning assembly or use to ensure proper function and longevity of your product.
Image: Two Lexicon Cottage 23" Counter Height Chairs, showcasing their brown seat and light gray frame, designed for counter-height use.
The Lexicon Cottage Counter Height Chair features a transitional country styling with a durable wood frame and a two-tone finish of brown and light gray, over ash veneer. It is designed to complement casual dining spaces.
Setup and Assembly
Assembly of the Lexicon Cottage Counter Height Chair is required. Please ensure all parts are present before beginning. It is recommended to assemble the chair on a soft, clean surface to prevent scratching.
Required Tools (Not Included):
- Phillips Head Screwdriver
- Allen Wrench (often included with hardware, but a personal set may be helpful)
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all hardware and chair components are accounted for against the parts list (if provided with your product).
- Attach Front Legs: Secure the front legs to the seat frame using the provided bolts and washers. Do not fully tighten bolts at this stage.
- Attach Back Legs and Backrest: Connect the back legs to the seat frame and the backrest. Ensure the backrest is properly aligned. Use the appropriate bolts and washers, again, do not fully tighten.
- Install Stretchers/Rungs: Attach the side and front stretchers (rungs) between the legs. These provide stability and foot support. Secure with bolts, leaving them slightly loose.
- Final Tightening: Once all components are loosely assembled and the chair is upright on a flat surface, gently rock the chair to ensure it is level. Then, systematically tighten all bolts using the Allen wrench and screwdriver. Start from the seat frame and work outwards, ensuring all connections are snug but do not overtighten.
- Inspect: After tightening all hardware, inspect the chair for stability and ensure all connections are secure.
Image: A single Lexicon Cottage Counter Height Chair positioned beside a kitchen island, demonstrating its intended use in a dining or kitchen setting.
Operating Instructions
The Lexicon Cottage Counter Height Chair is designed for seating at counter-height surfaces. It is suitable for dining rooms, kitchens, or other areas requiring elevated seating.
- Proper Use: Use the chair for its intended purpose of seating. Avoid standing on the chair or using it as a step stool.
- Weight Capacity: The chair has a maximum weight capacity of 250 pounds. Do not exceed this limit to prevent damage or injury.
- Placement: Place the chair on a flat, stable surface. Ensure there is adequate space around the chair for safe movement.
Image: Four Lexicon Cottage Counter Height Chairs arranged around a matching dining table, illustrating a complete dining set configuration.
Maintenance
Regular maintenance will help preserve the appearance and extend the life of your Lexicon Cottage Counter Height Chair.
- Cleaning: Wipe clean with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Blot spills immediately with a clean, dry cloth.
- Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability and prevent wobbling.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the wood finish.
- Humidity Control: Maintain a consistent humidity level in the room to prevent wood from expanding or contracting, which can lead to cracks or warping.
Troubleshooting
If you encounter any issues with your chair, refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Uneven tightening of bolts; uneven floor. | Loosen all bolts slightly, place chair on a flat surface, apply even pressure to the seat, then retighten all bolts firmly. Ensure the floor surface is level. |
| Loose joints or creaking sounds. | Hardware has loosened over time. | Inspect all bolts and screws. Tighten any loose hardware. Do not overtighten. |
| Scratches or minor damage to finish. | Accidental impact or abrasion. | For minor scratches, a wood repair marker or furniture polish matching the finish color may be used. Consult a professional for significant damage. |
Specifications
Detailed specifications for the Lexicon Cottage 23" Counter Height Chair:
| Feature | Detail |
|---|---|
| Brand | Homelegance |
| Model Number | 5803RF-24 |
| Color | Brown (seat) and Light Gray (frame) |
| Product Dimensions | 21"D x 17.5"W x 41"H |
| Seat Height | 23" |
| Seat Width | 17.5" |
| Seat Depth | 15.5" |
| Back Style | Cross Back |
| Frame Material | Asian Hardwood |
| Maximum Weight Recommendation | 250 Pounds |
| Product Care Instructions | Wipe Clean |
| Item Weight | 17.58 pounds |
| UPC | 194840091158 |
Image: A diagram illustrating the key dimensions of the chair, including overall height (41"), width (17.5"), depth (21"), seat height (23"), and seat depth (15.5").
Image: A close-up swatch displaying the two-tone finish of the chair, with a darker brown for the seat and a lighter gray for the frame.
Warranty Information
Specific warranty details for the Lexicon Cottage 23" Counter Height Chair are not provided in this manual. Please refer to the product packaging or contact Homelegance customer service for information regarding warranty coverage.
Customer Support
For further assistance, parts replacement, or inquiries not covered in this manual, please contact Homelegance customer support. Contact information may be found on the original product packaging or on the Homelegance official website.
Note: Always refer to the most current information provided by the manufacturer.
