Taylor Digital Clip Tuner

Introduction

The Taylor Digital Clip Tuner is designed to help musicians keep their instruments in tune with precision and ease. This sleek, stylish clip-on tuner utilizes a sensitive internal microphone to detect instrument vibrations, providing accurate chromatic tuning. Its easy-to-read, back-lit LCD display ensures visibility in various lighting conditions, including dark stages. The swivel design allows for optimal viewing angles, making tuning convenient for any user.

What's in the Box

• 1 x Taylor Digital Clip Tuner
• 1 x CR2 Battery (included)

Image: The Taylor Digital Clip Tuner is shown alongside its retail packaging, indicating the product and its included accessories.

Features

• Clip-on Chromatic Tuner with LCD Display
• Sensitive internal mic for accurate tuning
• Easy-to-read back-lit LCD readout
• Swivel design for adjustable viewing angles
• Multiple tuning modes: Chromatic, Guitar, Bass, Violin, Ukulele

Setup

1. Attach the Tuner: Gently open the clip and attach the tuner securely to the headstock of your instrument. Ensure the display faces you for easy viewing. The clip is designed to hold firmly without damaging the instrument's finish.
2. Adjust Viewing Angle: Utilize the tuner's swivel design to position the display at an angle that provides the best visibility while you are playing or tuning.

Image: The Taylor Digital Clip Tuner is shown clipped onto the headstock of an acoustic guitar, demonstrating its compact size and how it sits unobtrusively on the instrument.

Operating Instructions

1. Power On/Off: Press and hold the single power button located on the tuner to turn it on or off. The back-lit LCD display will illuminate when powered on.
2. Select Tuning Mode: Briefly press the power button repeatedly to cycle through the available tuning modes: Chromatic (C), Guitar (G), Bass (B), Violin (V), and Ukulele (U). Select the mode appropriate for your instrument.
3. Tuning Your Instrument:
   • Pluck a single string on your instrument. The tuner will detect the note and display it on the LCD screen.
   • The display will show the note name and a meter indicating whether the string is flat, sharp, or in tune.
   • Adjust the tuning peg of the string until the meter is centered and the display indicates the correct note in green. If the note is flat, tighten the string; if it's sharp, loosen it.
   • Repeat this process for all strings until your instrument is accurately tuned.

Battery Installation/Replacement

The Taylor Digital Clip Tuner uses one CR2 battery, which is included with your purchase. To install or replace the battery:

1. Locate the battery compartment on the back of the tuner.
2. Open the compartment cover.
3. Insert the CR2 battery with the positive (+) side facing up.
4. Close the battery compartment cover securely.

Troubleshooting

• Tuner not turning on: Ensure the CR2 battery is correctly installed and has sufficient charge. Replace the battery if necessary.
• Inaccurate tuning: Make sure the tuner is securely clipped to the instrument's headstock. Pluck strings clearly and individually to avoid interference. Check that the correct tuning mode is selected for your instrument.
• Display not visible: The LCD is back-lit. If it's dim, the battery may be low. Replace the battery.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Taylor Guitars website. Keep your proof of purchase for any warranty claims.