1. Introduction
Thank you for choosing the EMKE Illuminated Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions carefully before installation and retain them for future reference.
2. Important Safety Instructions
- Electrical Safety: Installation must be carried out by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected at the main circuit breaker before any installation or maintenance work.
- Water and Moisture: This mirror is designed for bathroom use but should not be directly exposed to water spray. Avoid installing near showers or bathtubs where direct water contact is likely.
- Handling: Mirrors are fragile. Handle with care to prevent breakage. Do not apply excessive force or impact.
- Cleaning: Use only soft, damp cloths and mild, non-abrasive cleaners. Avoid harsh chemicals that may damage the mirror surface or frame.
- Children: Keep packaging materials and small parts away from children. This product is not a toy.
3. Package Contents
Please check that all components are present and undamaged before proceeding with installation:
- 1 x EMKE LED Bathroom Mirror (800x600mm)
- 1 x User Manual (this document)
- 1 (set) x Screw Accessory (mounting hardware)
4. Product Features
Your EMKE Illuminated Bathroom Mirror is equipped with several advanced features for convenience and functionality:
- Integrated LED Lighting: Energy-efficient back-lit LED lights provide optimal illumination.
- Smart Touch Switch: A discreet touch sensor controls the LED lighting.
- Built-in Demister Pad: An anti-fog function ensures a clear reflection, separately controlled.
- 3X Magnification Mirror: A dedicated magnified area for detailed tasks like makeup application or shaving.
- Shaver Socket: An independent 2-pin shaver socket for charging electric shavers or toothbrushes.
Image: The EMKE Illuminated Bathroom Mirror with its LED lights activated, showcasing its modern design.
Image: Illustration of the smart touch switch, demonstrating how to turn the mirror lights on and off with a simple touch.
Image: Visual representation of the demister pad actively clearing fog from the mirror surface, ensuring a clear reflection.
Image: A person using the integrated 3X magnification mirror for applying makeup, highlighting its utility for detailed tasks.
Image: Close-up view of the independent 2-pin shaver socket located on the side of the mirror, suitable for charging bathroom appliances.
5. Setup and Installation
5.1 Before You Begin
- Unpack the mirror carefully and inspect for any damage. Report any issues immediately.
- Ensure you have the necessary tools: drill, spirit level, measuring tape, pencil, screwdriver.
- Confirm the installation location is suitable, considering electrical connections and wall structure.
5.2 Mounting the Mirror
The mirror is designed for wall mounting with horizontal fitting options. Refer to the included screw accessory set for specific mounting hardware.
- Measure and mark the desired position for the mirror on the wall, ensuring it is level.
- Drill holes at the marked positions, suitable for the provided wall plugs and screws.
- Insert wall plugs into the drilled holes.
- Secure the mounting brackets (if separate) or screws into the wall plugs, leaving a small gap for the mirror's hanging mechanism.
- Carefully lift the mirror and hang it onto the secured screws/brackets. Ensure it is stable and level.
Image: Diagram showing the mirror's dimensions, 800mm width by 600mm height, crucial for planning installation space.
5.3 Electrical Connection
The mirror requires a mains connection. For safety and compliance with electrical regulations, the electrical connection must be performed by a qualified electrician.
- Ensure the main power supply to the installation area is switched off.
- Connect the mirror's electrical wiring to the designated mains supply according to the wiring diagram provided by the electrician and local codes.
- Once connected, restore power and test all functions.
Image: The EMKE mirror seamlessly integrated into a modern bathroom environment, demonstrating its aesthetic appeal and functional placement.
6. Operating Instructions
6.1 LED Lighting
To activate the LED lighting, gently touch the designated touch switch icon on the mirror surface. Touch again to turn off the lights.
6.2 Demister Function
The demister pad is controlled by a separate touch button. Tap this switch to activate the anti-fog function. The demister will begin to clear condensation from the mirror surface. Tap again to turn off.
6.3 3X Magnification Mirror
The integrated 3X magnification mirror provides an enlarged reflection for detailed tasks. For optimal clarity and to avoid distortion, use this area at a distance of approximately 15cm from your face.
6.4 Shaver Socket
The independent 2-pin shaver socket is located on the side of the mirror. It is designed for charging electric shavers, toothbrushes, and other compatible 2-pin bathroom appliances. Ensure the appliance is suitable for the socket's voltage and current rating.
7. Maintenance
7.1 Cleaning the Mirror Surface
- Always disconnect power before cleaning.
- Use a soft, lint-free cloth dampened with water or a mild glass cleaner.
- Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the electrical components.
- Wipe the mirror surface gently. Avoid abrasive materials or harsh chemicals.
7.2 Cleaning the Frame
- Wipe the aluminum frame with a soft, damp cloth.
- Do not use abrasive cleaners or solvents that could damage the finish.
8. Troubleshooting
If you encounter any issues with your EMKE mirror, please refer to the following common problems and solutions:
- LED Lights Not Turning On:
- Check if the main power supply to the mirror is active.
- Ensure the electrical connection was performed correctly by a qualified electrician.
- Gently touch the switch icon to ensure proper contact.
- Demister Pad Not Activating:
- Verify that the separate demister touch switch is pressed.
- Allow a few minutes for the demister to heat up and begin clearing fog.
- Shaver Socket Not Providing Power:
- Ensure the mirror's main power supply is active.
- Check if the appliance being charged is correctly plugged in and functional.
If these steps do not resolve the issue, please contact EMKE customer support for further assistance.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | ULM13BTDSX1 |
| Dimensions (W x H) | 800mm x 600mm (31.5"L x 23.6"W) |
| Material | 5MM Environmentally Friendly Bronze-Free Mirror, Tempered Glass, Aluminum Frame |
| Mounting Type | Wall Mount (Horizontal Fitting) |
| Lighting | Back-lit LED, White Light |
| Control | Touch Switch (for LED), Separate Touch Switch (for Demister) |
| Special Features | Demister Pad, 3X Magnification, Shaver Socket |
| Power Connection | Mains Connection (no battery required) |
| Item Weight | 7.74 Kilograms (17.03 pounds) |
10. Warranty and Customer Support
EMKE products are manufactured to high-quality standards. In the unlikely event that you experience any issues with your mirror, or if the item does not meet your expectation, please contact EMKE customer support. Our team is available to assist with troubleshooting, replacements, or refunds as applicable. Please refer to your purchase documentation for specific warranty terms and contact details.
11. Environmental Protection and Disposal
This product contains electrical and electronic components. Do not dispose of it with general household waste. Please take it to a designated collection point for the recycling of electrical and electronic equipment (WEEE) in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.
