Introduction
The Niceboy Raze 3 Titan speaker placed on a cooler, demonstrating its suitability for outdoor and poolside environments due to its waterproof design.
Thank you for choosing the Niceboy Raze 3 Titan Wireless Bluetooth Speaker. This powerful and versatile speaker is designed to deliver high-quality audio with its 50W output and MaxxBass technology. Its robust IP67 waterproof and dustproof rating makes it ideal for various environments, while the integrated battery provides up to 15 hours of playback. Enjoy multiple connectivity options including Bluetooth 5.0, Micro SD card, USB drive, and AUX input, along with a built-in FM radio. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Safety Information
- Do not expose the speaker to extreme temperatures or direct sunlight for extended periods.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not disassemble, repair, or modify the speaker yourself. Refer to qualified service personnel.
- Keep the speaker away from medical devices, as it contains a magnet.
- Ensure all port covers are securely closed when exposing the speaker to water to maintain its IP67 rating.
- Use only the provided or certified charging cables.
Package Contents
Please check the package for the following items:
- Niceboy Raze 3 Titan Wireless Bluetooth Speaker
- USB-C Charging Cable
- 3.5mm Audio Cable (AUX)
- User Manual
Product Overview
Front view of the Niceboy Raze 3 Titan speaker, showcasing its cylindrical design and fabric grille.
Controls and Indicators:
Top view of the speaker, showing the control panel with various buttons and LED indicators.
- 1. Power Button: Press and hold to power on/off. Short press to play/pause.
- 2. Bluetooth Button: Short press to enter Bluetooth pairing mode.
- 3. Volume Down (-): Short press to decrease volume. Long press for previous track.
- 4. Play/Pause Button: Short press to play or pause music.
- 5. Volume Up (+): Short press to increase volume. Long press for next track.
- 6. Mode Button (M): Short press to switch between Bluetooth, FM Radio, Micro SD, and AUX modes.
- 7. Battery Indicators: LEDs showing current battery level.
Ports:
Rear view of the speaker, showing the protected port panel for charging, USB, Micro SD, and AUX connections.
- 1. USB-C Charging Port: For charging the speaker.
- 2. USB-A Port: For playing music from a USB flash drive or using the speaker as a power bank.
- 3. Micro SD Card Slot: For playing music directly from a Micro SD card.
- 4. AUX-in Port (3.5mm): For connecting external audio devices via an audio cable.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided USB-C cable to the speaker's USB-C charging port and the other end to a USB power adapter (not included) or a computer's USB port. The battery indicator LEDs will show the charging progress. Once fully charged, all LEDs will be solid.
2. Powering On/Off
To power on the speaker, press and hold the Power Button for approximately 2-3 seconds until you hear an audible prompt. To power off, press and hold the Power Button again for 2-3 seconds.
3. Bluetooth Pairing
- Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing blue LED.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Niceboy Raze 3 Titan" from the list of devices.
- Once successfully paired, you will hear a confirmation sound, and the Bluetooth LED will become solid blue.
- The speaker will automatically reconnect to the last paired device when powered on, if it's within range.
4. True Wireless Stereo (TWS) Pairing
The TWS function allows you to pair two Niceboy Raze 3 Titan speakers together for a stereo sound experience.
- Ensure both speakers are powered on and not connected to any other Bluetooth devices.
- On one of the speakers (this will be the primary speaker), short press the Bluetooth Button twice. The speaker will enter TWS pairing mode.
- The two speakers will automatically search for and connect to each other. You will hear a confirmation sound once connected.
- Once TWS paired, connect your mobile device to the primary speaker via Bluetooth as described in step 3. Both speakers will then play audio in stereo.
5. Connecting via AUX
To play audio from devices without Bluetooth, use the 3.5mm audio cable.
- Connect one end of the 3.5mm audio cable to the speaker's AUX-in Port.
- Connect the other end to the audio output jack of your device (e.g., MP3 player, laptop).
- The speaker will automatically switch to AUX mode, or you can manually select it by pressing the Mode Button.
6. Playing from Micro SD Card / USB Drive
A person inserting a USB flash drive into the speaker's USB-A port, demonstrating media playback capability.
The speaker supports playing audio files directly from a Micro SD card or a USB flash drive.
- Insert a Micro SD card into the Micro SD Card Slot or a USB flash drive into the USB-A Port.
- The speaker will automatically detect the storage device and switch to the corresponding mode, beginning playback of supported audio files.
- Use the Mode Button to switch between different input sources if needed.
Operating Instructions
1. Music Playback
- Play/Pause: Short press the Play/Pause Button.
- Volume Control: Short press Volume Up (+) to increase volume, short press Volume Down (-) to decrease volume.
- Next Track: Long press Volume Up (+).
- Previous Track: Long press Volume Down (-).
2. FM Radio Operation
The speaker features an integrated FM radio antenna for convenient listening.
- Press the Mode Button repeatedly until you enter FM Radio mode.
- To auto-scan and save available stations, long press the Play/Pause Button. The speaker will scan and store stations automatically.
- Once scanning is complete, short press the Volume Up (+) or Volume Down (-) buttons to switch between saved stations.
3. Power Bank Function
The Niceboy Raze 3 Titan can also serve as a power bank to charge your mobile devices.
- Connect your mobile device's charging cable to the speaker's USB-A Port.
- The speaker will begin charging your device. Note that using the power bank function will consume the speaker's battery.
4. Call Handling (with Integrated Microphone)
When connected via Bluetooth to a smartphone, you can manage calls directly from the speaker.
- Answer/End Call: Short press the Play/Pause Button.
- Reject Call: Long press the Play/Pause Button.
- Redial Last Number: Double-press the Play/Pause Button.
Maintenance
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- If the speaker gets wet, wipe it dry thoroughly before opening any port covers or charging.
- Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- To prolong battery life, charge the speaker fully at least once every three months if not in regular use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| No sound from speaker. | Volume too low; incorrect input mode; device not connected. | Increase volume; press Mode button to select correct input; ensure device is properly connected (Bluetooth/AUX). |
| Bluetooth connection unstable or fails. | Speaker too far from device; interference; pairing issue. | Move speaker closer to device; clear obstacles; unpair and re-pair the speaker from your device's Bluetooth settings. |
| TWS pairing fails. | Speakers not in TWS pairing mode; too far apart. | Ensure both speakers are not connected to other devices; follow TWS pairing steps carefully; place speakers closer during pairing. |
| Poor FM radio reception. | Weak signal. | Relocate the speaker to an area with better signal reception. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Raze 3 Titan |
| Brand | NICEBOY |
| Output Power | 50 Watts |
| Connectivity Technology | Bluetooth 5.0, USB, Auxiliary |
| Audio Output Mode | Stereo (2.0 Channel) |
| Battery Life | Up to 15 hours |
| Impedance | 4 ohms |
| Waterproof Rating | IP67 |
| Special Features | High-resolution audio, Integrated microphone, USB port, Waterproof, FM Radio, True Wireless Stereo (TWS) |
| Dimensions (L x W x H) | 22 x 9.5 x 9 cm |
| Weight | 1.57 kilograms |
| Compatible Devices | Game console, Laptop, MP3 player, Tablet, Television, Smartphone, Projector |
Warranty and Support
The Niceboy Raze 3 Titan speaker comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact Niceboy customer service through their official website or the retailer where you purchased the product. Keep your proof of purchase for warranty validation.
