RedThunder K10 Wireless Gaming Keyboard and Mouse Combo User Manual

1. Product Overview

The RedThunder K10 Wireless Gaming Keyboard and Mouse Combo offers a high-performance 2.4G wireless connection, LED backlighting, and a rechargeable battery for extended use. Designed for PC gamers, this combo features mechanical-feel anti-ghosting keys with pudding keycaps and a 7D 3200DPI mouse, providing a responsive and immersive gaming experience.

2. Setup Guide

2.1 Initial Charging

Before first use, it is recommended to fully charge both the keyboard and mouse for approximately 8 hours to ensure optimal battery performance. The keyboard is equipped with a 3000 mAh battery, and the mouse with an 800 mAh battery.

RedThunder K10 Keyboard and Mouse Charging — Figure 2.1: Illustration of the keyboard and mouse being charged via USB, highlighting their respective battery capacities.

2.2 Wireless Connection (Plug and Play)

The RedThunder K10 combo utilizes a single 2.4G USB receiver for both the keyboard and mouse. The devices are pre-paired at the factory for convenience.

Locate the USB receiver: The USB receiver is conveniently stored in a compartment at the bottom of the mouse.
Insert the receiver: Plug the USB receiver into an available USB port on your computer.
Power on devices: Turn on the power switch for both the keyboard and the mouse. The power switch for the mouse is also located on its bottom side.
Automatic connection: The keyboard and mouse will automatically connect to your computer. No additional drivers are typically required.

RedThunder K10 Wireless Setup with USB Receiver — Figure 2.2: Diagram showing the 2-in-1 USB receiver and its storage location at the bottom of the mouse, illustrating the wireless connection concept.

RedThunder K10 Keyboard and Mouse Power Switches and Receiver Location — Figure 2.3: Close-up view of the keyboard's charging port and power switch, along with the mouse's power switch and USB receiver compartment.

3. Operating Instructions

3.1 Keyboard Backlight Control

The K10 keyboard features vibrant LED backlighting with multiple modes and adjustable settings.

Switch Backlight Color/Mode: Press the LED key (located near the number pad) to cycle through 4 dynamic backlight modes and 8 static light colors. This key also turns the backlight on/off.
Adjust Brightness: Press FN + PU (Page Up) to increase brightness, and FN + PD (Page Down) to decrease brightness. There are 3 brightness levels.
Adjust Breathing Speed: Press FN + "+" to speed up the breathing rate, and FN + "-" to slow down the breathing rate. There are 4 breathing speeds.
Switch Breathing Mode: Press FN + LED to switch between 1-color and 3-color breathing modes.

RedThunder K10 Keyboard Backlight Controls — Figure 3.1: Visual guide to keyboard backlight controls, including LED key for mode/color, and FN key combinations for brightness and breathing speed.

The keyboard features luminous letters, logo, gaps, and surrounding lights for enhanced visual appeal. Note that there is no surrounding light in the top right corner due to indicator lights.

RedThunder K10 Keyboard Pudding Keycaps — Figure 3.2: Close-up views illustrating the pudding keycaps, letter lighting, and gap lighting effects on the keyboard.

RedThunder K10 Keyboard Letter Light — Figure 3.2: Close-up views illustrating the pudding keycaps, letter lighting, and gap lighting effects on the keyboard.

3.2 Mouse Operation

The 7D 3200DPI mouse features a 7-color cyclic gradual lighting effect and adjustable DPI settings for precise control.

DPI Adjustment: Use the DPI+ and DPI- buttons (located behind the scroll wheel) to cycle through 4 DPI steps, allowing you to adjust cursor sensitivity.
Ergonomic Design: The mouse is designed to fit comfortably in the palm, providing an anti-sweat and non-slip grip for extended use.

RedThunder K10 Mouse DPI Buttons and Ergonomics — Figure 3.3: Detailed view of the 7D 3200DPI RGB mouse, highlighting the DPI adjustment buttons and its ergonomic shape.

3.3 Power Saving Mode

Both the keyboard and mouse are equipped with smart energy-saving functions. If there is no operation within 2 minutes, they will automatically enter sleep mode to conserve battery. To wake them up, simply press any key on the keyboard or move the mouse.

3.4 Official Product Video

For a visual demonstration of the RedThunder K10 Keyboard and Mouse Combo's features and lighting effects, please watch the official product video below.

Video 3.1: Official product video demonstrating the RedThunder K10 Pudding Wireless Keyboard and Mouse Combo, including its RGB lighting and key features.

4. Maintenance

4.1 Charging

To maintain optimal battery life, charge the keyboard and mouse regularly using the provided USB cable. The keyboard uses a Type-C interface for charging. Ensure the devices are powered off or in sleep mode during charging for faster replenishment.

RedThunder K10 Keyboard Charging Port — Figure 4.1: Images showing the charging ports for both the keyboard and the mouse.

RedThunder K10 Mouse Charging Port — Figure 4.1: Images showing the charging ports for both the keyboard and the mouse.

4.2 Cleaning

To clean your keyboard and mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the devices. Avoid using harsh chemicals or abrasive materials.

5. Troubleshooting

Connection Loss: If the connection between the keyboard/mouse and your computer is lost, you may need to reset the code pairing. Turn off both devices, unplug the USB receiver, then plug the receiver back in and turn on the devices. If issues persist, refer to the "Plug and Play" section for re-pairing instructions.
Keys/Mouse Not Responding: Ensure the devices are charged and powered on. Verify the USB receiver is securely plugged into your computer. If specific keys are not working, or the mouse is unresponsive, try connecting to a different USB port or another computer to isolate the issue.
Backlight Issues: If the backlight is not functioning as expected, ensure the keyboard is charged. Cycle through the backlight modes using the LED key. Adjust brightness using FN + PU/PD.
Short Battery Life: Ensure both devices are fully charged before use. Remember that continuous use with backlighting will consume battery faster. The smart energy-saving mode should help prolong battery life during idle periods.

If you encounter any issues not covered here or require further assistance, please contact RedThunder customer service for support.

6. Specifications

Feature	Detail
Brand	RedThunder
Model	K10
Connectivity Technology	2.4G Wireless, USB
Keyboard Description	Gaming (Mechanical Feel, Anti-ghosting)
Keyboard Backlighting	RGB (4 dynamic, 8 static lights, 3 brightness, 4 breathing speeds)
Keycap Type	Pudding Keycaps (ABS two-color injection molding)
Keyboard Battery	3000 mAh (Rechargeable)
Mouse DPI	3200 DPI (7D, 4 adjustable steps)
Mouse Lighting	7-color cyclic gradual lighting effect
Mouse Battery	800 mAh (Rechargeable)
USB Receiver	Shared for Keyboard and Mouse, stored in mouse bottom
Compatible Operating Systems	Windows 2000/XP/Vista/Win7/Win8/Win10/MAC/Linux/Chrome/XBOX/PS4
Keyboard Dimensions	43.9 x 13.4 x 3.8 cm (17.2 x 5.2 x 1.5 inches)
Mouse Dimensions	12.7 x 7.2 x 4.0 cm (5 x 2.8 x 1.6 inches)
Item Weight	950 Grams
Key Lifespan	10,000,000 keystrokes

RedThunder K10 Keyboard and Mouse Dimensions and Compatibility — Figure 6.1: Overview of the product dimensions and wide compatibility with various operating systems.

7. Warranty and Support

RedThunder provides a 30-day money-back guarantee and a 12-month worry-free warranty on every K10 Wireless Gaming Keyboard and Mouse Combo. This warranty covers manufacturing defects and ensures product quality.

For any product-related inquiries, technical support, or warranty claims, please contact RedThunder customer service. We are committed to providing the best customer service to every user.

You can find more information and support on the official RedThunder store page:

Visit the RedThunder Store

	RedThunder K84 Wireless Keyboard and Mouse Combo User Manual User manual for the RedThunder K84 wireless keyboard and M84 mouse combo. Learn about setup, features like 75% compact layout and honeycomb mouse, troubleshooting, and safety guidelines.
	K10 Ultrasonic Dog Training Device - Functions and Modes Learn about the K10 ultrasonic dog training device, its ultrasonic button operation, safety features, and the two distinct sound modes (stable and undulating) for effective dog deterrence and training.
	K10 Mini Drone User Manual Comprehensive user manual for the K10 Mini Drone. Includes setup instructions, remote control operation, flight safety, maintenance, and troubleshooting guide.
	K10 Tablet User Manual - Android 13 Comprehensive user manual for the K10 Android 13 tablet, covering specifications, functions, settings, app management, multimedia, troubleshooting, and regulatory compliance.
	EU Declaration of Conformity - K84 Wireless Keyboard and M84 Mouse Official EU Declaration of Conformity for Shenzhen RedThunder's K84 Wireless Keyboard and M84 Mouse, detailing compliance with relevant Union harmonization legislation.
	Red Thunder K10 Wireless Keyboard and Mouse User Manual User manual for the Red Thunder K10 rechargeable wireless 2.4G keyboard and mouse, including setup, pairing instructions, key descriptions, and troubleshooting.

RedThunder K10