Beurer LR 220

Download PDF
Contents

Beurer LR 220 Air Purifier Instruction Manual

Model: LR 220 (663.75)

Brand: Beurer

1. Introduction

Welcome to the instruction manual for your new Beurer LR 220 Air Purifier. This device is designed to significantly improve the air quality in your home or office by filtering out various airborne particles. Please read this manual carefully to ensure safe and optimal use of your air purifier.

Beurer LR 220 Air Purifier, a white cylindrical device with a perforated lower section and a top control panel.

Figure 1: The Beurer LR 220 Air Purifier, showcasing its sleek, cylindrical design with a perforated lower section for air intake and a control panel on top.

2. Product Features

The Beurer LR 220 Air Purifier offers advanced features to ensure clean and healthy indoor air:

  • Effective Air Purification: Filters 99.95% of particles including viruses, bacteria, allergens, fine dust, and pollen.
  • Three-Layer Filter System: Composed of a pre-filter, HEPA H13 filter, and activated carbon filter for comprehensive air cleaning.
  • Ideal for Allergy Sufferers: Effectively removes household dust, pet hair, and pollen from the air.
  • Odor and Harmful Gas Neutralization: Activated carbon filter helps to eliminate unpleasant odors and harmful gases.
  • Suitable Room Size: Designed for rooms up to 37 m².
  • Turbo Mode: Provides rapid air purification when needed.
  • Night Mode: Ensures quiet operation with a dimmed control panel for undisturbed sleep.
  • Timer Function: Allows setting operation for 2, 4, or 8 hours.
  • Two Performance Levels: Adjustable fan speed for different air purification needs.
  • Quiet Operation: Designed to run silently, especially in night mode.
  • Airflow Rate: Up to 125 m³/h.
  • Filter Change Indicator: Notifies when the filter needs replacement.
Diagram showing the three-layer filter system of the Beurer LR 220 Air Purifier, including pre-filter, HEPA H13 filter, and activated carbon filter.

Figure 2: Illustration of the Beurer LR 220's advanced three-layer filter system, demonstrating how it captures various airborne particles.

Close-up view of the Beurer LR 220 Air Purifier's illuminated control panel with buttons for power, filter, timer (2h, 4h, 8h), and mode selection.

Figure 3: A detailed view of the illuminated control panel, showing the intuitive buttons for power, filter reset, timer settings, and fan speed adjustment.

The Beurer LR 220 Air Purifier in a room setting with an overlay indicating its suitability for rooms up to 37 square meters.

Figure 4: The air purifier positioned in a living space, with an overlay highlighting its effective coverage area of up to 37 square meters.

The Beurer LR 220 Air Purifier next to a person petting a cat, highlighting its ability to capture animal hair and pet dander.

Figure 5: The air purifier shown in a home environment with a pet, emphasizing its capability to capture animal hair and dander, making it suitable for pet owners and allergy sufferers.

A person sleeping peacefully in bed, with text indicating the Beurer LR 220 Air Purifier's silent night mode operation.

Figure 6: An image depicting a person sleeping, illustrating the quiet operation of the air purifier in night mode, ensuring an undisturbed environment.

3. Setup

3.1 Unpacking

  1. Carefully remove the air purifier and all accessories from the packaging.
  2. Check for any signs of damage during transit. If damaged, do not use the device and contact customer support.
  3. Retain the packaging for future storage or transport.

3.2 Filter Installation

The combined filter (pre-filter, HEPA H13, activated carbon) is typically pre-installed but may be wrapped in plastic for protection. Ensure the plastic wrapping is removed before first use.

  1. Turn the air purifier upside down.
  2. Twist the bottom cover counter-clockwise to unlock and remove it.
  3. Carefully remove the filter cartridge. If it's new, remove any plastic packaging from the filter.
  4. Insert the filter cartridge back into the unit, ensuring it is seated correctly.
  5. Replace the bottom cover and twist clockwise to lock it securely.
Disassembled view of the Beurer LR 220 Air Purifier showing the main unit, the circular filter cartridge, and the bottom cover.

Figure 7: A view of the Beurer LR 220 with its bottom cover and filter removed, illustrating the components involved in filter installation and replacement.

3.3 Power Connection

  1. Place the air purifier on a stable, flat surface, ensuring adequate space around it for air circulation.
  2. Plug the power cord into a suitable electrical outlet.

4. Operating Instructions

4.1 Power On/Off

  • To turn the unit ON, press the Power button (ON/OFF) on the control panel. The indicator lights will illuminate.
  • To turn the unit OFF, press the Power button again.

4.2 Adjusting Performance Levels

  • The LR 220 has two performance levels. Press the fan speed button (often indicated by a fan icon or 'I/II') to cycle between the levels.
  • Level I is for quieter operation and continuous purification.
  • Level II provides stronger airflow for faster purification.

4.3 Turbo Mode

  • To activate Turbo Mode for rapid air cleaning, press the Turbo button (often indicated by a fan icon with 'TURBO'). The unit will operate at its highest fan speed.
  • Press the Turbo button again to exit Turbo Mode.

4.4 Night Mode

  • To activate Night Mode, press the Night Mode button (often indicated by a moon icon). The fan speed will reduce to the lowest setting, and the control panel lights will dim or turn off.
  • Press the Night Mode button again to exit Night Mode.

4.5 Timer Function

  • To set the timer, press the Timer button (often indicated by a clock icon). Each press will cycle through the available timer settings: 2 hours, 4 hours, 8 hours.
  • The corresponding indicator light will illuminate. The unit will automatically turn off after the selected time period.
  • To cancel the timer, press the Timer button until no timer indicator light is illuminated.

5. Maintenance

5.1 Cleaning the Unit

  • Always unplug the air purifier before cleaning.
  • Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Ensure no water enters the internal components.
  • Clean the air intake and outlet vents regularly with a soft brush or vacuum cleaner to remove dust buildup.

5.2 Filter Replacement

The combined filter has a limited lifespan and needs to be replaced regularly to maintain optimal performance. The filter change indicator will illuminate when replacement is due.

  1. Unplug the air purifier from the power outlet.
  2. Turn the unit upside down and unlock the bottom cover by twisting it counter-clockwise.
  3. Remove the old filter cartridge.
  4. Dispose of the old filter responsibly.
  5. Insert a new Beurer LR 220 combined filter cartridge into the unit.
  6. Replace the bottom cover and twist clockwise to lock it securely.
  7. Plug the unit back in.

5.3 Resetting the Filter Change Indicator

  • After replacing the filter, press and hold the Filter button (often indicated by 'FILTER' or a filter icon) for approximately 3-5 seconds until the indicator light turns off. This resets the filter timer.

6. Troubleshooting

If you encounter issues with your Beurer LR 220 Air Purifier, please refer to the following table before contacting customer support:

ProblemPossible CauseSolution
Unit does not turn on.Not plugged in; Power outlet malfunction; Filter not installed correctly.Ensure power cord is securely plugged in; Test outlet with another device; Reinstall filter and ensure bottom cover is locked.
Air quality does not seem to improve.Filter is dirty or expired; Room size exceeds capacity; Air intake/outlet blocked.Replace the filter; Ensure unit is used in a room within its specified size (up to 37 m²); Clear any obstructions from vents.
Filter change indicator remains on after filter replacement.Filter indicator not reset.Press and hold the Filter button for 3-5 seconds to reset the indicator.
Unusual noise during operation.Unit not on a flat surface; Foreign object inside; Filter not seated correctly.Place unit on a stable, flat surface; Unplug and check for foreign objects; Reinstall filter.

7. Technical Specifications

SpecificationValue
Product NameBeurer LR 220
Model Number663.75
Dimensions (L x W x H)22 x 22 x 34 cm (product); 39.5 x 27 x 27 cm (packaging)
Product WeightApprox. 2.9 kg (net); 3.14 kg (item)
Power SourceElectric Cord
Power Consumption1500 Watts (Note: This value seems unusually high for an air purifier and might be a general power rating for a different product category. Please refer to the product label for accurate power consumption.)
Filter TypeHEPA H13 (3-layer system: pre-filter, HEPA H13, activated carbon)
Filtration Performance99.95%
Applicable Floor AreaUp to 37 m²
Airflow RateUp to 125 m³/h
Control MethodButton Control (Remote Control mentioned in specifications, but product description implies button control)
ColorBlack (Note: Product images show white. Please verify product color upon receipt.)

8. Warranty and Support

Beurer products are manufactured to high-quality standards and are designed for reliable performance. For information regarding the warranty period and terms for your Beurer LR 220 Air Purifier, please refer to the warranty card included in your product packaging or visit the official Beurer website.

If you require technical assistance, have questions about product operation, or need to order replacement parts (such as filters), please contact Beurer customer support. You can often find contact details on the official Beurer website or through the retailer where you purchased the product.

For more information about Beurer products, you can visit the official Beurer store: Beurer Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.