1. Introduction
This manual provides essential information for the safe and efficient operation of your OUPES Portable Power Station 600W (1000W Surge), 595Wh LiFePO4 Solar Generator. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: OUPES Portable Power Station 600W, front view showing AC outlets, DC ports, USB ports, and the display screen.
2. Package Contents
Verify that all items are included in your package:
- 1x OUPES 600W Portable Power Station
- 1x 24V/4A AC Adapter & Charging Cable
- 1x Car Charger to DC7909 Charging Cable
- 1x User Manual
Figure 2: Included accessories: AC adapter, car charger cable, warranty card, and user manual, alongside the power station.
3. Product Features
- 595Wh Capacity: Provides power for various devices such as laptops, phones, tablets, fans, drones, and LED lights. Supports pass-through charging.
- LiFePO4 Battery: Offers over 3500 charging cycles, ensuring long-term durability. Designed for quiet and eco-friendly operation with no fumes.
- Smart LED Display: Real-time monitoring of battery power, input/output, charging status, and remaining working time.
- Multiple Recharging Options: Can be recharged via Wall Outlet, USB-C Port, Car Charging, Solar Panel (sold separately), and a combination of USB-C + Wall Outlet for faster charging.
- Integrated LED Light: Features an LED light with 3 modes for illumination.
Figure 3: Diagram illustrating the 8 output ports for different devices, including AC outlets, DC 12V/10A, USB PD 60W, and USB QC 3.0, along with estimated runtimes for various appliances.
Figure 4: Visual representation of the five charging methods: USB-C & Wall Outlet (3.5H), Wall Outlet (7.5H), Car Charging (10.5H), Solar Panel (7.5H), and USB-C Port (12H).
4. Setup
4.1 Initial Charging
Before first use, fully charge the power station. Use the provided AC adapter or a compatible solar panel (sold separately). The LED display will indicate charging progress.
Figure 5: Various charging scenarios for the OUPES power station, including wall outlet, car charger, and solar panel, with estimated charging times to 80% capacity.
4.2 Understanding the Display
The smart LED display provides critical information:
- Battery Capacity Percentage: Shows the current charge level.
- Current Discharge/Charge Power: Indicates power consumption or input.
- Remaining Time: Estimates how long the battery will last or how long until fully charged.
- Fault Warning: Alerts to potential issues.
- Over Temp. Protection: Indicates high temperature.
- Low Temp. Protection: Indicates low temperature.
- Cooling Fan: Indicates fan operation.
Figure 6: Detailed breakdown of the OUPES power station's LED display, showing indicators for fault warnings, AC output, battery capacity, temperature protection, cooling fan, and various input/output types.
5. Operating Instructions
5.1 Powering On/Off
Press and hold the main power button to turn the unit on or off. The display will illuminate upon activation.
5.2 Using AC Outlets
To use the AC outlets, press the AC power button. The AC icon on the display will light up. Plug your device into one of the 110V/600W AC outlets. Remember to turn off the AC output when not in use to conserve battery.
5.3 Using DC and USB Ports
The DC 12V/10A, USB-C PD 60W, and USB QC 3.0 ports are typically active when the unit is powered on. Simply plug in your devices. The display will show the output wattage for each port.
5.4 LED Light Operation
Press the LED light button to cycle through its modes: low brightness, high brightness, and SOS flash. Press again to turn off.
6. Maintenance
- Storage: Store the power station in a cool, dry place away from direct sunlight and extreme temperatures.
- Charging Frequency: For optimal battery life, fully charge the unit every 3-6 months, even if not in use.
- Cleaning: Use a dry, soft cloth to clean the exterior. Do not use abrasive cleaners or immerse the unit in water.
- Ventilation: Ensure proper ventilation during use and charging to prevent overheating. Do not block the cooling vents.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit not turning on | Battery depleted; Power button not held long enough. | Charge the unit; Press and hold the power button for 3 seconds. |
| AC output not working | AC output not activated; Overload protection; Device power exceeds 600W. | Press the AC power button; Reduce load; Check device wattage. |
| Slow charging via solar panel | Insufficient sunlight; Panel not optimally positioned; Panel wattage too low. | Ensure direct sunlight; Adjust panel angle; Use a higher wattage solar panel. |
| Cooling fan runs constantly | High internal temperature; Heavy load. | This is normal operation to dissipate heat. Ensure vents are clear. Reduce load if persistent. |
If problems persist, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Oupes 600 |
| Model Number | SP-UPP-600J |
| Capacity | 595Wh |
| AC Output | 600W (1000W Surge), 120V (AC), 60Hz |
| Battery Type | LiFePO4 |
| Cycle Life | 3500+ cycles |
| Item Weight | 15 Pounds |
| Product Dimensions | 10.5"L x 7.76"W x 9.73"H |
| Operating Temperature | 14-149℉ (-10~65℃) |
| Sound Level | 58 dB |
Figure 7: Dimensions of the OUPES Portable Power Station, showing its length, width, and height.
9. Warranty and Support
The OUPES Portable Power Station comes with a 5-year warranty. For warranty claims, technical support, or any inquiries, please contact OUPES customer service. Refer to the warranty card included in your package for detailed terms and conditions.
You can also visit the official OUPES store for more information: OUPES Store on Amazon.
