Introduction
This manual provides instructions for the Anderic RRTX007 replacement remote control, designed to operate various Harbor Breeze ceiling fans. Please read these instructions carefully before installation and use to ensure proper function and safety.
Compatibility
The Anderic RRTX007 remote operates at a frequency of 315MHz and is a direct replacement for the following Harbor Breeze remote models:
- A25-TX007-R1
- A25-TX007-N
- A25-TX007-L
- A25-TX007-S
- A25-TX007-LS
- A25-TX007-LR
Important Note:
To ensure compatibility, verify that the back of your original remote explicitly states "A25-TX007". This remote is also known to work with the 00581 STG60 SARATOGA II CEILING FAN and other compatible models.
Setup and Pairing
1. Battery Installation
The RRTX007 remote requires one 12V A23 battery (sold separately). Ensure correct polarity when inserting the battery.
Image: Back of the remote control with the battery compartment open.
2. DIP Switch Setting
The remote features DIP switches inside the battery compartment. These switches must match the settings on your ceiling fan's receiver unit. If you have multiple fans, it is recommended to set different DIP switch combinations for each remote to prevent interference.
Image: Internal view of the remote's battery compartment, highlighting the DIP switches.
3. Pairing Instructions
- Install the 12V A23 battery into the remote, observing correct polarity.
- Adjust the DIP switches on the remote to match the settings on your fan's receiver.
- Restore power to your ceiling fan using either the wall switch or the circuit breaker.
- Within 30 seconds of restoring power, press and release the LEARN button on the remote.
- If pairing is successful, the fan will turn on at low speed, and the light will blink twice before remaining on.
Video Guide: Pairing the Anderic RRTX007 Remote
Video: A step-by-step guide on how to pair the Anderic RRTX007 remote control with your ceiling fan receiver.
Operating the Remote Control
The Anderic RRTX007 remote provides comprehensive control over your ceiling fan's functions:
Image: Front of the remote control displaying fan speed, light, and timer buttons.
- Fan Speed Control: Use the LOW, MED, and HI buttons to adjust the fan speed. Press OFF to turn the fan off.
- Light Control: The light button (often depicted as a light bulb icon) controls the fan's light. Press once to turn on/off. Hold the button down to dim or brighten the light.
- Timer Function: The remote may include timer buttons (e.g., 1H, 2H, 4H, 8H) to set the fan to operate for a specific duration before automatically turning off.
Maintenance
Battery Replacement
When the remote's performance degrades or it stops responding, replace the 12V A23 battery. Open the battery compartment cover on the back of the remote, remove the old battery, and insert a new one with the correct polarity. Dispose of old batteries responsibly.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the remote's surface or internal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead battery or incorrect DIP switch settings. | Replace the 12V A23 battery. Verify DIP switch settings match the receiver. Re-pair the remote if necessary. |
| Fan or light not responding after pairing. | Incorrect pairing procedure or power interruption. | Ensure power was restored to the fan within 30 seconds before pressing the LEARN button. Repeat pairing steps. |
| Light does not dim. | Non-dimmable light bulbs installed. | Ensure you are using dimmable incandescent or LED bulbs. CFL lamps typically only support ON/OFF. |
| Multiple fans interfering with each other. | Remotes/receivers have identical DIP switch settings. | Change the DIP switch settings on one or more remotes/receivers to a unique combination. |
Specifications
- Model Number: RRTX007
- Product Dimensions: 4.5 x 2.5 x 1 inches
- Item Weight: 2.08 ounces
- Battery Requirement: 1 x 12V A23 battery (not included)
- Connectivity Technology: Radio Frequency (RF)
- Operating Frequency: 315MHz
- Compatible Devices: Ceiling Fans
- Manufacturer: Dan's Electronics Etc., Inc.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official Anderic brand store or contact Dan's Electronics Etc., Inc. directly. Keep your purchase receipt for any warranty claims.
Visit the Anderic Store on Amazon for more products and support.
