OMAIC BOSE-YQHFBA

OMAIC Replacement Remote Control User Manual

For Bose Wavemusic and Soundtouch Systems

Introduction

This manual provides comprehensive instructions for the OMAIC Replacement Remote Control, designed for various Bose Wavemusic and Soundtouch Systems. Please read this manual carefully to ensure proper use and maintenance of your remote control.

Product Overview

OMAIC Replacement Remote Control front and back view

The OMAIC Replacement Remote Control is a direct replacement for your original Bose Wave Soundtouch remote. It features a user-friendly layout with clearly labeled buttons for various functions, including power, volume, mode selection, track control, and alarm settings. The remote is lightweight and designed for comfortable handling.

OMAIC Replacement Remote Control with labeled buttons and dimensions

This image illustrates the various buttons and their functions on the OMAIC Replacement Remote Control. Key features include: On/Off, Mute, FM/AM, CD, AUX mode, Volume control, Seek/Track, Play/Pause/Stop/Eject, Tune/Playlist, Time adjustment, Presets (1-6), Play Mode, Alarm On/Off, Wake To, and Alarm Time. The remote dimensions are approximately 3.81 inches (Length), 2.16 inches (Width), and 0.2 inches (Thickness).

Compatibility

Compatible Bose Wave Soundtouch Music Systems

This remote control is compatible with the following Bose Wave Soundtouch Music Systems:

  • Bose Wave Soundtouch Music System I
  • Bose Wave Soundtouch Music System II
  • Bose Wave Soundtouch Music System III
  • Bose Wave Soundtouch Music System IV
  • Bose Wave Soundtouch Music System 5 CD Multi Disc Player

Note: This remote is NOT compatible with Acoustic Wave Music Systems.

Setup

Battery Installation

Steps for battery installation in the remote control
  1. Remove the battery cover: Locate the battery cover on the back of the remote control and slide it off.
  2. Insert battery: Insert one CR2032 button cell battery into the battery compartment, ensuring the correct polarity (+/-) as indicated inside the compartment. (Battery not included)
  3. Replace the battery cover: Slide the battery cover back into place until it clicks securely.

Once the battery is installed, the remote control is ready to use. No programming is required to connect it to your Bose system.

Operating Instructions

The OMAIC Replacement Remote Control provides full functionality for your compatible Bose Wave Soundtouch Music System. Simply point the remote towards your Bose system and press the desired button.

  • Power On/Off: Press the "On Off" button to power the system on or off.
  • Volume Control: Use the "Volume +" and "Volume -" buttons to adjust the sound level.
  • Mute: Press the "Mute" button to silence the audio.
  • Mode Selection: Use "FM AM", "CD", or the "AUX" button (represented by the square icon) to switch between radio, CD, or auxiliary input modes.
  • Track/Seek: Use the "Seek / Track" buttons (double arrows) to skip tracks on a CD or seek radio stations.
  • Play/Pause/Stop/Eject: Control CD playback with these dedicated buttons.
  • Presets: Use buttons 1-6 to access your saved radio station presets.
  • Alarm Functions:
    • "Alarm On/Off": Toggle the alarm function.
    • "Wake To": Select the audio source for the alarm.
    • "Alarm Time": Adjust the alarm time.
    • "Stop Alarm": Silence an active alarm.
  • Range: The remote can effectively control the Bose device from more than 10 meters (approximately 33 feet) away.

Maintenance

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: Replace the CR2032 battery when the remote's performance degrades or it stops responding. Follow the battery installation steps outlined in the "Setup" section.
  • Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Remote not responding.Dead or incorrectly installed battery. Obstruction between remote and Bose system. Remote is out of range.Check and replace the CR2032 battery, ensuring correct polarity. Remove any obstructions. Move closer to the Bose system (within 10 meters).
Specific functions not working.Incorrect mode selected on the Bose system.Ensure the Bose system is in the correct mode (e.g., CD mode for CD functions).
Remote does not work with my Bose system.Incompatible Bose model.Verify your Bose system model against the "Compatibility" section. This remote is not compatible with Acoustic Wave Music Systems.

Specifications

  • Model: BOSE-YQHFBA
  • Dimensions: 3.1 x 2 x 0.5 inches (7.87 x 5.08 x 1.27 cm)
  • Item Weight: 0.634 ounces (18 grams)
  • Connectivity Technology: Infrared
  • Max Number of Supported Devices: 1
  • Special Feature: Ergonomic design
  • Battery Type: 1x CR2032 (Not Included)
  • Manufacturer: YAOQI

Warranty and Support

The OMAIC Replacement Remote Control comes with an unlimited return and refund service within 45 days of purchase. We strive for 100% customer satisfaction.

If you have any questions or concerns regarding your order or the product, please feel free to reach out to us directly. We aim to respond within 12 hours on working days.

For support, please refer to the contact information provided with your purchase or visit the OMAIC store on Amazon.

© 2024 OMAIC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.