1. Introduction and Overview
This manual provides essential information for the safe and efficient operation of your Fellowes Powershred LX50 9-Sheet Crosscut Shredder. This desk-side shredder is designed for personal use, offering secure disposal of sensitive documents.
Image 1.1: Front view of the Fellowes Powershred LX50 Crosscut Shredder, showing the waste bin window.
Key Features:
- Shreds up to 9 sheets of paper per pass into 5/32 inch x 1-7/16 inch crosscut particles.
- Capable of shredding staples, small paper clips, and plastic credit cards.
- Features a patented SafetyLock to disable the shredder for enhanced safety.
- Equipped with a 4.4-gallon waste bin with an easy liftoff head, holding approximately 205 shredded sheets.
- Designed for individual use with a 5-minute continuous run time, followed by a 30-minute cooldown period.
2. Important Safety Instructions
To prevent injury and ensure proper operation, always adhere to the following safety guidelines:
- Read all instructions before using the shredder.
- Keep hands, jewelry, loose clothing, and hair away from the paper entry slot.
- Do not allow children or pets near the shredder during operation. Always engage the SafetyLock when not in use.
- Unplug the shredder before moving, cleaning, or emptying the waste bin.
- Do not shred metal objects other than staples and small paper clips. Avoid shredding adhesive labels, continuous forms, or plastic other than credit cards.
- Do not use aerosol products near the shredder.
- Avoid placing the shredder near heat sources or in direct sunlight.
- Ensure the shredder is placed on a stable, level surface.
3. Setup
Follow these steps to set up your shredder:
- Unpack Components: Carefully remove the shredder head assembly and waste bin from the packaging.
- Assemble: Place the shredder head assembly securely onto the waste bin. Ensure it is properly seated.
- Position: Place the shredder on a flat, stable surface near a power outlet.
- Connect Power: Plug the power cord into a standard electrical outlet.
Image 3.1: The Fellowes Powershred LX50 shredder positioned for use in an office environment.
4. Operating Instructions
Your Powershred LX50 is designed for ease of use. Follow these steps for shredding:
- Power On: Locate the control switch on top of the shredder head. Slide the switch to the 'ON' (Auto) position. The shredder is now ready for operation.
- Engage SafetyLock: To prevent accidental operation, slide the SafetyLock switch to the locked position when the shredder is not in use or when children are present.
- Feed Material: Insert up to 9 sheets of paper (or one credit card) straight into the paper entry slot. The shredder will automatically start and stop once the material has passed through.
- Observe Run Time: The shredder can operate continuously for up to 5 minutes. If the shredder overheats, it will automatically shut off and require a 30-minute cooldown period before resuming operation.
- Reverse Function: In case of a paper jam, slide the control switch to the 'REVERSE' position to clear the jam.
- Power Off: When finished shredding, slide the control switch to the 'OFF' position and engage the SafetyLock.
Image 4.1: Demonstrating how to feed paper into the shredder's entry slot.
Image 4.2: Detail of the control panel with power and SafetyLock switches.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your shredder.
Emptying the Waste Bin:
When the waste bin is full, the shredder will stop operating. To empty:
- Unplug the shredder from the power outlet.
- Lift the shredder head assembly off the waste bin.
- Dispose of shredded material.
- Replace the shredder head securely onto the waste bin.
- Plug the shredder back in to resume operation.
Image 5.1: The shredder with a visible accumulation of shredded paper in the waste bin.
Oiling the Shredder:
For optimal performance and to extend the life of your shredder, it is recommended to oil the cutting blades periodically, especially after emptying the waste bin 2-3 times or if performance decreases. Use Fellowes shredder oil (sold separately).
- Apply a thin line of shredder oil across the paper entry slot.
- Run a few sheets of paper through the shredder to distribute the oil.
6. Troubleshooting
If you encounter issues with your shredder, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Shredder does not start | Not plugged in; SafetyLock engaged; Overheated; Waste bin full or not properly seated. | Ensure power cord is securely plugged in. Disengage SafetyLock. Allow 30 minutes for cooldown. Empty and reseat waste bin. |
| Paper jam | Too much paper inserted; Material not fed straight. | Slide switch to 'REVERSE' to clear. Reduce paper quantity. Feed paper straight. |
| Shredder stops during operation | Overheated; Waste bin full. | Allow 30 minutes for cooldown. Empty waste bin. |
| Increased noise or reduced performance | Blades require oiling. | Oil the shredder blades as described in the Maintenance section. |
7. Specifications
| Model Number | 4402801 |
| Cut Type | Cross Cut |
| Sheet Capacity | 9 sheets (20lb bond paper) |
| Particle Size | 5/32 in. x 1-7/16 in. |
| Waste Bin Capacity | 4.4 gallons (approx. 205 shredded sheets) |
| Shreds | Paper, staples, small paper clips, plastic credit cards |
| Continuous Run Time | 5 minutes |
| Cooldown Period | 30 minutes |
| Operation Mode | Automatic |
| Item Dimensions (D x W x H) | 12.99"D x 12.99"W x 9.09"H |
| Enclosure Material | Plastic |
| Manufacturer | FELLOWES, INC |
| UPC | 043859769643 |
8. Warranty and Support
Warranty Information:
The Fellowes Powershred LX50 9-Sheet Crosscut Shredder comes with a 1-year machine warranty and a 5-year cutter warranty. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fellowes customer support. Refer to the official Fellowes website for current contact information.
