HASWING Electric Trolling Motor 50756 12V-3HP Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe installation, operation, maintenance, and troubleshooting of your HASWING Electric Trolling Motor, Model 50756-PROTRUAR-3HP. This 12V brushless motor is designed for both saltwater and freshwater environments, offering 3 horsepower equivalent thrust and precise stepless speed control. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

Image 1.1: Overview of the HASWING Electric Trolling Motor 50756 12V-3HP.

2. Safety Information

Always prioritize safety when operating any marine equipment. Failure to follow these instructions may result in injury or damage to the product.

• Magnetic Emergency Kill Switch: The motor is equipped with a magnetic emergency kill switch. Always attach the lanyard to yourself or your clothing while operating the motor. In an emergency, detaching the lanyard will immediately cut power to the motor.
• Power Source: Ensure the motor is connected to a compatible 12V deep cycle marine battery. Do not connect to power sources exceeding 12V.
• Propeller Safety: Keep hands, feet, and clothing clear of the propeller at all times, especially when the motor is in operation or connected to a power source.
• Installation: Ensure the motor is securely mounted to the transom of your boat before connecting power.
• Water Conditions: Operate the motor responsibly and be aware of your surroundings, including water depth, obstacles, and other vessels.
• Maintenance: Disconnect the battery before performing any maintenance or inspection on the motor.

3. Product Overview

The HASWING Electric Trolling Motor 50756-PROTRUAR-3HP features a robust design for reliable performance. Key components and features include:

Image 3.1: Labeled diagram of the HASWING Trolling Motor components.

Key Features:

• Powerful Thrust: 110 lbs of thrust provides ample power for various boat sizes and water conditions.
• Durable Brushless Motor: Equipped with a 12V brushless motor for enhanced efficiency, quiet operation, and extended longevity.
• Stepless Speed Control: Allows for precise adjustment of forward and reverse speeds, adapting to different fishing techniques and conditions.
• Magnetic Emergency Kill Switch: Ensures immediate power cut-off for safety in critical situations.
• Adjustable Height and Tilt: Easily adjust the motor's depth and angle for optimal performance in varying water depths. The tiltable bracket offers 7 levels of tilting position.
• LED Voltage Indicator: Monitors battery life, helping you plan your trips effectively and avoid unexpected power loss.
• Extendable and Foldable Handle: The handle extends up to 400mm and features a 180-degree folding function for convenient storage and operation.
• Sacrificial Anode: Protects the motor from galvanic corrosion, especially in saltwater environments.

4. Specifications

Detailed technical specifications for the HASWING Electric Trolling Motor 50756-PROTRUAR-3HP:

5. Setup & Installation

5.1 Mounting the Motor

1. Select Mounting Location: Choose a sturdy location on the boat's transom, ensuring the motor can be fully submerged and clear of obstructions.
2. Attach Bracket: Securely attach the transom mount bracket to the boat using appropriate marine-grade hardware. Ensure the bracket is tightened firmly to prevent movement during operation.
3. Insert Motor Shaft: Slide the motor shaft into the bracket. Adjust the depth collar to set the desired operating depth. The propeller should be submerged at least 6 inches below the water surface.
4. Secure Motor: Tighten the bracket clamps to hold the motor firmly in place.

Image 5.1: Detail of the transom mounting bracket.

5.2 Battery Connection

1. Battery Type: Use a 12V deep cycle marine battery. Ensure the battery is fully charged before use.
2. Connect Cables: Connect the red positive (+) cable from the motor to the positive (+) terminal of the battery. Connect the black negative (-) cable from the motor to the negative (-) terminal of the battery.
3. Secure Connections: Ensure all connections are tight and free from corrosion. Loose connections can cause power loss or overheating.
4. Kill Switch: Attach the magnetic kill switch lanyard to the motor's control head and to yourself.

6. Operating Instructions

6.1 Power On and Speed Control

1. Engage Kill Switch: Ensure the magnetic kill switch is properly seated on the control head.
2. Adjust Speed: Rotate the stepless speed control handle to increase or decrease speed. Rotate forward for forward motion and backward for reverse motion. The motor offers precise, continuous speed adjustment.

Image 6.1: Stepless speed control handle for precise adjustments.

6.2 Depth and Angle Adjustment

1. Depth Adjustment: Loosen the depth collar on the shaft to slide the motor up or down. Tighten the collar firmly once the desired depth is achieved.
2. Tilting: The motor features a tiltable bracket with 7 positions. Use the tilt mechanism to adjust the motor's angle, allowing for operation in shallow water or to lift the motor completely out of the water when not in use or for transport.

Image 6.2: Illustration of the 7-level tiltable bracket.

6.3 Handle Extension and Folding

1. Extend Handle: Pull the handle outwards to extend its length up to 400mm for comfortable operation.
2. Fold Handle: The handle can be folded 180 degrees for compact storage or when not in use.

Image 6.3: The handle's extension and folding capabilities.

6.4 Battery Status Indicator

The control head features an LED indicator that displays the remaining battery power in 3 levels. Monitor this indicator to avoid unexpected power loss during your trip.

Image 6.4: LED display for battery status.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your trolling motor.

• Disconnect Power: Always disconnect the battery before performing any maintenance.
• Cleaning: After each use, especially in saltwater, rinse the motor thoroughly with fresh water to remove salt, dirt, and debris. Wipe down all surfaces.
• Propeller Inspection: Regularly inspect the propeller for weeds, fishing line, or damage. Remove any obstructions carefully. If the propeller is damaged, replace it to maintain efficiency and prevent vibration.
• Sacrificial Anode: The motor is equipped with a sacrificial anode to protect against galvanic corrosion. Inspect the anode periodically (e.g., every 50 hours of use or annually) and replace it if it is significantly corroded (more than 50% consumed).
• Electrical Connections: Check battery terminals and motor connections for corrosion. Clean with a wire brush if necessary and apply a dielectric grease to prevent future corrosion.
• Storage: When storing the motor for extended periods, ensure it is clean, dry, and stored in a cool, dry place. Disconnect the battery.

Image 7.1: The brushless motor and propeller assembly.

8. Troubleshooting

This section addresses common issues you might encounter with your trolling motor. For problems not listed here, please contact customer support.

9. Warranty & Support

For warranty information, technical support, or to purchase replacement parts, please contact the manufacturer or your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: Haswing

Contact Information: Refer to the product packaging or the official Haswing website for the most current support contact details.