Introduction
Thank you for choosing the LEAP Professional Stopwatch. This manual provides detailed instructions for the setup, operation, and maintenance of your new stopwatch, ensuring optimal performance and longevity. This model, the TSC2810, features a large digital display, 10-lap split memory, and water resistance, making it ideal for various sports and timing needs.
Please read this manual thoroughly before using the device to familiarize yourself with its functions and capabilities.
Product Overview
The LEAP Professional Stopwatch (Model TSC2810) is designed for accurate timing in sports, games, and other activities requiring precise measurement. Key features include:
- Large Display: Extra-large screen for easy viewing of time and recorded data.
- Lap/Split Memory: Stores up to 10 lap/split times, recallable during operation.
- Ergonomic Design: Comfortable and flexible button operation.
- Accuracy: 1/100 second accuracy for precise timing.
- Water Resistant: Designed to prevent surface water damage (not for submersion).
- Durable: Built for long-lasting use, includes a lanyard and battery.
Figure 1: Front view of the LEAP Professional Stopwatch, highlighting its large digital display and button layout. The display shows time, lap/split indicators, and mode icons.
Setup
1. Unpacking
Carefully remove the stopwatch from its packaging. Ensure all components are present:
- LEAP Professional Stopwatch (Model TSC2810)
- Lanyard (46 inches)
- LR44 Battery (pre-installed or included)
2. Battery Installation (if not pre-installed)
The stopwatch uses one LR44 battery. If the display is blank or dim, you may need to install or replace the battery.
- Locate the battery compartment on the back of the stopwatch.
- Use a small screwdriver to open the battery cover.
- Insert the LR44 battery with the positive (+) side facing up.
- Securely close the battery cover.
Figure 2: Illustration detailing the large screen and the quick-replace battery compartment for the LEAP stopwatch. The image shows the back of the stopwatch with the battery cover.
Note: While some visuals may show CR2032, product specifications for this model list LR44. Please use the battery type specified in your product's packaging or the LR44 as per the specifications.
3. Attaching the Lanyard
Thread the included lanyard through the loop at the top of the stopwatch for convenient carrying around your neck or wrist.
Operating Instructions
The LEAP stopwatch features four main buttons: LAP/SPLIT/RESET (top left), RECALL (top middle), START/STOP (top right), and MODE (bottom right).
1. Power On/Off
- To Power On: Press the MODE button (bottom right).
- To Power Off: While in time display mode (not actively timing), press and hold the LAP/SPLIT/RESET and START/STOP buttons simultaneously until the display turns off. Ensure all data is cleared before powering off, as stored times may be lost.
2. Mode Selection
Press the MODE button to cycle through the different functions:
- Stopwatch Mode: For timing events.
- Timer Mode: For countdown functions (if available on your specific model).
- Time Display Mode: Shows current time.
3. Stopwatch Function
In Stopwatch Mode:
- Press START/STOP to begin timing.
- Press LAP/SPLIT/RESET to record a lap or split time. The display will show the split time while the main timer continues running.
- Press START/STOP again to pause the timer.
- Press START/STOP to resume timing.
- To reset the stopwatch after stopping, press LAP/SPLIT/RESET.
Figure 3: The stopwatch display in action, showing the main elapsed time and a split time. The buttons for LAP/SPLIT/RESET and START/STOP are visible.
4. Recalling Lap/Split Times
The stopwatch can store up to 10 lap/split times.
- While the stopwatch is running or stopped, press the RECALL button to view stored lap/split times.
- Use the LAP/SPLIT/RESET and START/STOP buttons to navigate through the stored records.
- Press RECALL again to exit recall mode.
Note: Once 10 memories are used, new lap/split times may not be stored, or older ones may be overwritten depending on the specific model's memory management. It is recommended to record important times externally.
5. Setting Time and Date
In Time Display Mode:
- Press and hold the MODE button until the time digits begin to flash.
- Use LAP/SPLIT/RESET to adjust the value and START/STOP to move to the next setting (hours, minutes, seconds, date, month, year).
- Press MODE again to confirm and exit setting mode.
Maintenance
1. Cleaning
Wipe the stopwatch with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the display or casing.
2. Water Resistance
The stopwatch is designed to be water resistant against splashes and light rain. It is not waterproof and should not be submerged in water or exposed to strong jets of water. Avoid contact with corrosive liquids.
Figure 4: The LEAP stopwatch demonstrating its water-resistant capability, showing it can withstand splashes but should not be fully immersed.
3. Storage
Store the stopwatch in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to high or low temperatures can affect battery life and device performance.
4. Battery Replacement
When the display becomes dim or unresponsive, it's time to replace the LR44 battery. Follow the battery installation steps in the Setup section.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead battery. | Replace the LR44 battery. |
| Stopwatch does not respond to button presses. | Device is off or frozen. | Press the MODE button to turn on. If unresponsive, remove and reinsert battery to reset. |
| Lap/split times are not saving or are lost. | Memory full or device powered off incorrectly. | Ensure memory is not full (max 10 laps). Always clear data before powering off if you wish to retain it, or record externally. |
| Buttons feel too sensitive or unresponsive. | Normal operation or internal issue. | Ensure firm, deliberate presses. If issues persist, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | TSC2810 |
| Brand | LEAP |
| Material | Plastic |
| Color | 2raw 10 Lap/Split (referring to the model variant) |
| Screen Size | 2 Inches |
| Accuracy | 1/100 second |
| Memory | 10 Lap/Split Memory |
| Battery Type | LR44 (Included) |
| Item Dimensions (L x W x H) | 5.83 x 3.15 x 1.14 inches |
| Item Weight | 0.09 Kilograms (approx. 90g) |
| Water Resistance | Surface water resistant (not for submersion) |
Warranty Information
LEAP provides a Lifetime Warranty service for this stopwatch. This warranty covers manufacturing defects and issues arising from normal use.
Note: The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or battery replacement. Avoid contact with corrosive objects and prolonged use under excessive temperature or low temperature, as the battery is not covered by the warranty under these conditions.
For warranty claims, please retain your proof of purchase and contact LEAP customer support.
Customer Support
If you encounter any issues or have questions not covered in this manual, please contact LEAP customer support through the following channels:
- Online Support: Visit the official LEAP store on Amazon: LEAP Store
- Email: Refer to the contact information provided with your product packaging or on the LEAP store page.
When contacting support, please provide your product model (TSC2810) and a detailed description of the issue.
