MCombo Accent Chair with Ottoman

Introduction

Thank you for choosing the MCombo Accent Chair with Ottoman, Model 4079. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before assembly and retain them for future reference.

Important Safety Information

Always follow the assembly instructions carefully. Do not exceed the maximum weight recommendation of 280 lbs. Keep the ottoman on a stable surface when in use and store it properly when not in use to prevent tripping hazards. Ensure all components are securely fastened before use.

Setup and Assembly

The MCombo Accent Chair with Ottoman is designed for straightforward assembly. One adult can typically complete the assembly in approximately 30 minutes.

Components Checklist:

• Chair Seat and Backrest Assembly
• Ottoman Cushion
• Chair Legs (4)
• Ottoman Legs (4)
• Lumbar Pillow (1)
• Hardware Pack (screws, washers, Allen wrench)
• Instruction Manual

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, soft surface to prevent scratches. Verify all components are present against the checklist.
2. Attach Chair Legs: Locate the attachment points on the underside of the chair seat. Align each chair leg with its designated hole and secure it using the provided screws and Allen wrench. Ensure all legs are tightened firmly.
3. Attach Ottoman Legs: Similarly, attach the four ottoman legs to the underside of the ottoman cushion, ensuring they are securely fastened.
4. Final Check: Once all legs are attached, gently place the chair and ottoman upright. Ensure stability and re-tighten any loose screws if necessary.
5. Position Lumbar Pillow: Place the lumbar pillow on the chair backrest for added support.

Operating Instructions

Your MCombo Accent Chair and Ottoman are designed for comfort and versatility in various settings.

Using the Chair:

• The chair features an ergonomic curved backrest and seat cushion for support.
• The included lumbar pillow can be adjusted for optimal waist support, enhancing relaxation.
• The chair is suitable for activities such as reading, relaxing, or watching television.

Using the Ottoman:

• The matching ottoman provides leg support when used with the chair.
• It can also function as a standalone small stool or accent piece in any room.
• For space-saving, the ottoman can be placed on the chair when not in use.

Maintenance

Proper care will help maintain the appearance and longevity of your MCombo Accent Chair and Ottoman.

Cleaning the Velvet Fabric:

• The velvet fabric is designed to be non-shedding, durable, and resistant to fading.
• For routine cleaning, gently wipe the surface with a damp cloth.
• Immediately dry the cleaned area with a paper towel to prevent water marks.
• For spills or tougher spots, spot clean with a mild upholstery cleaner, testing on an inconspicuous area first.
• Avoid harsh chemicals or abrasive cleaning tools, as these can damage the fabric.

General Care:

• Periodically check all screws and connections to ensure they remain tight.
• Avoid prolonged exposure to direct sunlight to prevent potential fading.
• Keep away from heat sources to prevent material degradation.

Troubleshooting

This section addresses common concerns you might encounter with your accent chair and ottoman.

Stability Issues:

• Problem: The chair or ottoman feels wobbly.
• Solution: Ensure all legs are securely tightened. If the issue persists, check that the furniture is placed on a flat, even surface. Adjust the furniture's position or use furniture pads if the floor is uneven.

Fabric Appearance:

• Problem: Velvet appears flattened or has pressure marks.
• Solution: Gently brush the velvet pile with a soft brush or a clean, dry cloth in the direction of the pile to restore its texture.

Missing Parts:

• Problem: Components or hardware are missing from the package.
• Solution: Refer to the components checklist in the Setup section. Contact MCombo customer support for assistance with replacement parts.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official MCombo brand store.

Visit the MCombo Store for Support