Inlight 14-inch 3-Light Drum Pendant Light

Introduction

This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your Inlight 14-inch 3-Light Drum Pendant Light (Model: IN-0337-3-BK). This modern fixture features a matte black metal frame with an openwork trellis pattern, a white fabric shade, and an etched glass diffuser. It is designed for indoor use in various settings such as kitchen islands, dining rooms, living rooms, and foyers.

Please read all instructions carefully before beginning installation and retain this manual for future reference.

Safety Information

• WARNING: To avoid electric shock, always turn off the power at the main circuit breaker or fuse box before installation, servicing, or changing bulbs.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• This fixture is ETL listed, ensuring it meets safety standards.
• Do not exceed the maximum wattage specified for the bulbs.
• Handle glass components with care to prevent breakage.
• Ensure the mounting surface can support the weight of the fixture.

Package Contents

Verify that all components are present and undamaged before assembly.

• Pendant Light Fixture (Metal Frame, Fabric Shade, Glass Diffuser)
• Canopy
• Downrods (Two 6-inch, Two 12-inch)
• Mounting Hardware (Crossbar, Screws, Wire Nuts)
• Instruction Manual

Note: Bulbs are not included and must be purchased separately.

Setup and Installation

Follow these steps for proper installation. It is recommended to have two people for installation.

1. Turn Off Power: Before starting, ensure the power supply to the fixture location is turned off at the circuit breaker.
2. Prepare Mounting: Attach the mounting crossbar to the junction box in the ceiling using the provided screws.
3. Assemble Downrods: Determine the desired hanging height. The fixture comes with two 6-inch and two 12-inch downrods, allowing for an adjustable height from 18.6 inches to 48.6 inches. Connect the chosen downrods to the fixture body and the canopy. The fixture is adaptable for sloped ceilings.
4. Wiring: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
5. Mount Canopy: Carefully push the canopy up to the ceiling, aligning the screws on the mounting crossbar with the holes in the canopy. Secure the canopy with the decorative nuts.
6. Install Bulbs: Insert three E26 base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb. This fixture is compatible with LED, CFL, Halogen, and Incandescent bulbs.
7. Install Diffuser and Shade: Place the etched glass diffuser into the bottom of the fabric shade, then attach the fabric shade to the metal frame.
8. Restore Power: Once installation is complete, turn the power back on at the circuit breaker.

Operating Instructions

Once properly installed and wired, the Inlight Drum Pendant Light operates via a standard wall switch (not included). Ensure the switch is in the 'ON' position to illuminate the fixture.

• Power Source: The fixture requires an AC power source (110 Volts).
• Bulb Compatibility: Use E26 base bulbs, maximum 60 watts each. Compatible with LED, CFL, Halogen, and Incandescent bulb types.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your light fixture.

• Cleaning: Always turn off the power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: Ensure the power is off and the bulbs have cooled before attempting to replace them.

Troubleshooting

If you encounter issues with your pendant light, refer to the following common problems and solutions:

• Light does not turn on:
  • Check if the power is on at the circuit breaker.
  • Ensure the wall switch is in the 'ON' position.
  • Verify that bulbs are correctly installed and not burnt out.
  • Check all wire connections for security.
• Light flickers:
  • Ensure bulbs are fully tightened in their sockets.
  • If using a dimmer switch, ensure the bulbs are compatible with dimming.
  • Check for loose wire connections.

If problems persist, consult a qualified electrician or contact Inlight customer support.

Specifications

Warranty and Support

This Inlight product comes with a manufacturer-and-seller-combination warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation included with your purchase or contact the seller directly.

For technical support or assistance with installation, please contact Inlight customer service through the retailer where the product was purchased.