1. Introduction
Thank you for choosing the VEIKOUS 3-Piece Industrial Bar Table and Chairs Set. This manual provides detailed instructions for assembly, usage, maintenance, and troubleshooting to ensure you get the most out of your new furniture. This versatile set, featuring a counter-height table with integrated storage shelves and two matching stools, is designed to enhance your kitchen, living room, or dining area with both style and functionality.
2. Safety Information
Please read all safety warnings and instructions carefully before assembly and use.
- Always follow the assembly instructions carefully.
- Do not exceed the weight capacity of the table (132 lbs) and stools (264 lbs each).
- Keep the product away from heat sources and do not place heavy objects on the shelves.
- Ensure the product is stable and properly assembled to prevent tip-over risks, especially if used in small spaces or around children.
- Periodically check all bolts and connections to ensure they remain tight.
3. Package Contents
Before beginning assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact VEIKOUS customer support.
- 1 x Bar Table (with integrated shelves)
- 2 x Bar Stools
- 1 x Hardware Kit (screws, bolts, Allen wrench, etc.)
- 1 x Assembly Instruction Manual
4. Setup and Assembly
Assembly is required for this product. It is recommended to assemble the set with two people. Please follow the steps below carefully.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface (like a carpet) to prevent scratches. Identify all metal frames, wooden panels (tabletop, shelves, stool seats), and hardware from the kit.
- Assemble the Table Frame: Begin by connecting the main metal frame pieces for the table. Use the provided bolts and Allen wrench. Do not fully tighten bolts until all components are in place.
- Attach Storage Shelves: Secure the three rustic brown shelves to the designated metal frame sections of the table. Ensure they are level and firmly attached.
- Attach Tabletop: Place the main tabletop panel onto the assembled table frame. Align the pre-drilled holes and secure it with the appropriate screws.
- Assemble Bar Stools: For each stool, connect the metal frame pieces. Then, attach the rustic brown stool seat to the top of the assembled frame. Repeat for the second stool.
- Final Tightening: Once all components of both the table and stools are assembled, go back and fully tighten all bolts and screws. Ensure the set is stable and level.
- Adjust Leveling Feet: The table and stools are equipped with adjustable feet. If the set wobbles on an uneven floor, gently twist the feet at the bottom of the legs until the set is stable.

Figure 4.1: Complete VEIKOUS 3-piece bar table set. This image displays the complete VEIKOUS 3-piece bar table set, featuring a rectangular table with integrated side shelves and two matching bar stools. The set has a rustic brown finish with a black metal frame.

Figure 4.2: Adjustable Leveling Feet. A detailed view of the adjustable foot on one of the table legs. These adjustable feet help stabilize the table on uneven surfaces and protect floors from scratches.
5. Operating and Usage
The VEIKOUS Bar Table Set is designed for versatile use in various home settings.
- Dining Area: Use as a compact dining solution for two, perfect for small kitchens or apartments.
- Bar Area: Create a cozy bar nook for casual drinks or entertaining.
- Workstation: The table can serve as a functional computer desk or a reading table.
- Storage: Utilize the three integrated side shelves for storing books, kitchen essentials, decorative items, or other small belongings.
- Space-Saving Design: The stools are designed to tuck neatly under the table when not in use, maximizing floor space.

Figure 5.1: Space-Saving Design. This image demonstrates the space-saving design of the bar table set, with both stools neatly stored beneath the table when not in use. This compact arrangement is ideal for smaller living spaces.
6. Maintenance
Proper care will extend the life and appearance of your bar table set.
- Cleaning: Wipe off any stains or spills from the surface with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
- Dusting: Regularly dust the surfaces with a soft, dry cloth.
- Avoid Moisture: Do not allow liquids to sit on the surface for extended periods. Wipe up spills immediately.
- Heat Protection: Use coasters or placemats to protect the tabletop from hot items.
- Weight Distribution: Distribute weight evenly on the table and shelves to prevent stress on the structure.
7. Troubleshooting
If you encounter any issues with your VEIKOUS Bar Table Set, please refer to the common problems and solutions below.
- Wobbling Table/Stools:
Solution: Ensure all bolts and screws are fully tightened. Use the adjustable leveling feet at the bottom of the legs to stabilize the furniture on uneven floors. - Missing or Damaged Parts:
Solution: Before assembly, carefully check all package contents against the parts list. If any parts are missing or damaged, do not proceed with assembly. Contact VEIKOUS customer support for replacement parts. - Difficulty Assembling:
Solution: Review the assembly instructions carefully, paying attention to diagrams. Ensure you are using the correct hardware for each step. Sometimes, loosening all bolts slightly before final tightening can help align parts. It is recommended to have two people for assembly. - Stools Seem Too Short for Table:
Note: The stools are designed to be counter height (25.5 inches / 65 cm) to match the table's height (40.5 inches / 103 cm). While this provides a comfortable seating arrangement for many, individual preferences may vary. Please refer to the specifications section for exact dimensions.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | VEIKOUS |
| Model Number (ASIN) | B0949BTG1Z |
| Table Dimensions (L x W x H) | 47.2'' x 23'' x 40.5'' (120 cm x 60 cm x 103 cm) |
| Bar Stool Dimensions (L x D x H) | 15.7'' x 11.8'' x 25.5'' (40 cm x 30 cm x 65 cm) |
| Number of Shelves | 3 tiers |
| Table Weight Capacity | Up to 132 lbs (60 kg) |
| Stool Weight Capacity | Up to 264 lbs (120 kg) per stool |
| Material | Engineered Wood (P2 MDF), Metal |
| Color | Rustic Brown |
| Product Care Instructions | Wipe with Damp Cloth |

Figure 8.1: Product Dimensions. This diagram illustrates the precise dimensions of the bar table and stools. The table measures 47.2 inches (120 cm) in length, 23 inches (60 cm) in width, and 40.5 inches (103 cm) in height. Each bar stool is 15.7 inches (40 cm) long, 11.8 inches (30 cm) deep, and 25.5 inches (65 cm) high. The table features three storage shelves.
9. Warranty and Support
For any questions, concerns, or assistance with your VEIKOUS Bar Table Set, please contact the manufacturer or seller directly through your purchase platform. Please have your order number and product model (B0949BTG1Z) ready for faster service.





