Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Eyoyo 8-inch HD monitor. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.
The Eyoyo 8-inch monitor features a 1280x720 HD resolution, 350 cd/m² brightness, and a 16:9 aspect ratio for clear and vibrant images. Equipped with IPS technology, it offers a wide 178° viewing angle. It supports multiple input interfaces including HDMI, VGA, AV, and BNC, making it versatile for various applications such as PC, car rear view, Raspberry Pi, and CCTV camera systems. The monitor also includes a remote control for convenient operation and supports both desktop and wall mounting.
Package Contents
Please verify that all items listed below are included in your package:
- Eyoyo 8-inch Monitor
- HDMI Cable
- VGA Cable
- Remote Control
- Wall Bracket
- Desktop Stand Base
- Mounting Accessories (screws, anchors)
- Power Adapter
- User Manual
Setup Instructions
1. Connecting the Monitor
- Power Connection: Connect the power adapter to the monitor's DC input port and then plug it into a power outlet.
- Video Source Connection: Connect your desired video source (e.g., PC, Raspberry Pi, CCTV camera) to the monitor using the appropriate cable (HDMI, VGA, AV, or BNC). Ensure the cables are securely connected to both the monitor and the source device.
2. Mounting Options
The monitor offers two primary mounting options:
- Desktop Stand: Attach the included desktop stand base to the bottom of the monitor. Ensure it is securely fastened.
- Wall Mount: The monitor is equipped with 75mm VESA mounting holes. Use the provided wall bracket and mounting accessories to securely attach the monitor to a wall. Follow the bracket installation steps carefully.
Operating Instructions
1. Power On/Off
Press the power button located on the front panel of the monitor or use the power button on the remote control to turn the monitor on or off.
2. Input Selection
Press the 'Input' button on the monitor's front panel or the remote control to cycle through the available input sources (HDMI, VGA, AV, BNC) until your desired source is displayed.
3. Menu Navigation
Use the 'Menu' button to access the on-screen display (OSD) menu. Navigate through the menu options using the arrow buttons and confirm selections with the 'Enter' button. Adjust settings such as brightness, contrast, color, aspect ratio, and image flip as needed.
4. Remote Control Usage
Point the remote control directly at the monitor's IR receiver for optimal response. The remote allows for convenient control of power, input selection, volume, and OSD menu navigation from a distance.
Maintenance
Cleaning the Monitor
- Always disconnect the power adapter before cleaning.
- Use a soft, dry, lint-free cloth to gently wipe the screen and exterior surfaces.
- Avoid using abrasive cleaners, solvents, or aerosol sprays, as these can damage the monitor's surface.
Storage
When not in use for extended periods, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your monitor, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | No power; Incorrect input source; Loose video cable. | Ensure power adapter is connected; Select correct input source; Check video cable connections. |
| Poor image quality | Incorrect resolution; Brightness/contrast settings; Faulty cable. | Adjust display resolution on source device; Adjust brightness/contrast in OSD menu; Try a different video cable. |
| No sound | Volume too low/muted; No audio signal; External speakers not connected. | Increase volume; Check audio settings on source device; Ensure external speakers are properly connected if used. |
| Monitor turns off unexpectedly | Loose power connection; Power saving mode activated. | Ensure power adapter is securely connected; Disable power saving features in OSD menu. |
If the problem persists after trying these solutions, please contact customer support.
Specifications
| Brand | Eyoyo |
| Model | EM08S-HD82 |
| Screen Size | 8 inches |
| Resolution | 1280 x 720 pixels |
| Aspect Ratio | 16:9 |
| Brightness | 350 cd/m² |
| Viewing Angle | 178° (IPS) |
| Response Time | 3 ms |
| Refresh Rate | 60 Hz |
| Display Type | LCD |
| Input Interfaces | HDMI, VGA, AV, BNC |
| Dimensions (D x W x H) | 25 x 33 x 7 cm |
| Weight | 1.16 kg |
| Mounting | VESA 75mm, Wall Mount |
Warranty and Support
Eyoyo offers a 1-year warranty on all products from the date of purchase. This warranty covers manufacturing defects and ensures your product functions as intended under normal use.
For technical support, warranty claims, or any inquiries regarding your Eyoyo monitor, please contact Eyoyo customer service. Our team is dedicated to providing solutions and assistance to ensure your satisfaction.
Please retain your proof of purchase for warranty validation.
