1. Introduction
This instruction manual provides essential information for the safe and effective operation, installation, and maintenance of your ATLAS Automotive Equipment WBT-210 Heavy Duty Wheel Balancer. Please read this manual thoroughly before operating the equipment to ensure proper usage and to prevent potential hazards. Keep this manual accessible for future reference.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in serious injury or equipment damage.
- Always wear appropriate personal protective equipment (PPE), including safety glasses and sturdy footwear, when operating the balancer.
- Ensure the equipment is installed on a level, stable surface capable of supporting its weight and the weight of the heaviest wheel being balanced.
- Disconnect power to the machine before performing any maintenance, adjustments, or cleaning.
- Keep hands, hair, and loose clothing clear of moving parts during operation.
- Do not exceed the maximum weight capacity of the balancer.
- Only trained and authorized personnel should operate this equipment.
- Never leave the machine unattended while in operation.
- In case of malfunction, immediately power off the machine and consult the troubleshooting section or contact qualified service personnel.
3. Product Overview
The ATLAS WBT-210 is a versatile heavy-duty wheel balancer designed for a wide range of vehicles, from passenger cars to large trucks. It features robust construction and advanced balancing capabilities.
Key Features
- Versatile Balancing Range: Accommodates wheels from 14-inch steel rims to 300-pound semi-truck tires.
- Heavy Duty Performance: Features a 40 mm shaft and includes cone sets for cars, light trucks, BUDD style wheels, and truck or bus tires.
- Efficient Operations: Equipped with self-diagnosis and self-calibration capabilities, displaying error codes for easier in-house adjustments.
- Automatic Functionality: Offers static and dynamic balancing modes, with automatic start/stop operations linked to the hood position.
- Complete Accessory Package: Includes a plastic quick release nut, heavy duty steel wing nut, pneumatic wheel lift, wheel weight pliers, and calipers.
Components and Dimensions
The WBT-210 balancer consists of a main unit with a control panel, a balancing shaft, a pneumatic wheel lift, and a protective hood. Below are images illustrating the machine and its key dimensions.
Figure 3.1: ATLAS WBT-210 Heavy Duty Wheel Balancer with a large truck tire mounted, showcasing its robust design.
Figure 3.2: Side view of the WBT-210 balancer with key dimensions (68" height, 48" width, 70" length) and the 40mm diameter shaft indicated.
Figure 3.3: The WBT-210 balancer shown with a truck tire (size 295/80/22.5) mounted, highlighting the heavy-duty wing nut and air-powered wheel lift.
Figure 3.4: Detailed view of the WBT-210 control panel, showing inner and outer weight displays, mode indicator lights, and various function keys for static/dynamic balancing, aluminum wheel modes, and parameter input.
4. Setup
4.1 Unpacking and Placement
Carefully unpack the WBT-210 balancer and all its components. Position the machine on a solid, level concrete floor capable of supporting the machine's weight (approximately 725 lbs) plus the maximum wheel weight. Ensure adequate space around the machine for safe operation and maintenance.
4.2 Power Connection
Connect the balancer to a suitable 220V power supply as indicated on the machine's specifications. Ensure the power outlet is properly grounded and protected by a circuit breaker. Consult a qualified electrician if necessary.
4.3 Initial Calibration
The WBT-210 features self-calibration capabilities. Refer to the control panel instructions (Figure 3.4) for initiating the self-calibration process upon initial setup or after significant relocation. This ensures accurate balancing results.
5. Operating Instructions
Follow these steps for balancing a wheel using the ATLAS WBT-210.
5.1 Mounting a Wheel
- Use the pneumatic wheel lift to raise the wheel to the level of the balancing shaft.
- Carefully slide the wheel onto the 40mm balancing shaft.
- Secure the wheel using the appropriate cone set and the heavy-duty steel wing nut or plastic quick release nut, ensuring it is centered and tightly fastened.
Video 5.1: This video demonstrates the process of mounting a wheel onto the ATLAS WBT-210 balancer, including the use of the pneumatic wheel lift and securing mechanisms.
5.2 Inputting Wheel Parameters
Refer to Figure 3.4 for the control panel layout.
- Use the measuring arms to determine the wheel's distance (A), width (B), and diameter (D).
- Input these values into the control panel using the corresponding A+, A-, B+, B-, D+, D- keys. The values will be displayed on the INNER and OUTER screens.
- Select the desired balancing mode (Static/Dynamic) using the STA/DYN key. For aluminum wheels, use the ALU mode key.
5.3 Balancing Process
- Lower the protective hood. The machine will automatically start the balancing cycle.
- Once the cycle is complete, the display will show the required weight amounts for the inner and outer sides of the wheel.
- The weight location indicators on the control panel will guide you to the precise placement points for the weights.
5.4 Weight Placement
Apply the indicated balance weights to the wheel at the positions shown by the control panel indicators. Re-spin the wheel to verify the balance. Repeat the process if necessary until the display shows zero or minimal imbalance.
6. Maintenance
Regular maintenance ensures the longevity and accuracy of your WBT-210 balancer.
- Regular Cleaning: Keep the machine clean from dirt, dust, and tire debris. Use a soft cloth and mild cleaner. Avoid harsh chemicals that could damage the finish or electronic components.
- Calibration Checks: Perform self-calibration periodically, or if you suspect inaccurate readings.
- Component Inspection: Regularly inspect the balancing shaft, cone sets, and quick release nut for wear or damage. Check all cables and connections for integrity.
- Lubrication: Follow manufacturer guidelines for lubricating any moving parts, if applicable.
7. Troubleshooting
The WBT-210 features self-diagnosis capabilities that display error codes. Consult the machine's internal error code list (if available in the full manual) for specific issues. Below are general troubleshooting tips:
- Inaccurate Readings: Ensure the wheel is properly mounted and centered. Verify that all wheel parameters (distance, width, diameter) are correctly entered. Perform a self-calibration.
- Machine Not Starting: Check power connection and circuit breaker. Ensure the protective hood is fully lowered.
- Excessive Vibration: Re-check wheel mounting. Inspect the balancing shaft for damage or excessive wear.
- Error Codes Displayed: Note the specific error code and refer to the detailed troubleshooting guide in the complete product manual or contact customer support.
8. Specifications
| Specification | Value |
|---|---|
| Brand | ATLAS |
| Model | WBT-210 |
| Item Weight | 725 pounds |
| Product Dimensions | 52 x 52 x 45 inches |
| Item Model Number | ATWBT210 |
| Manufacturer Part Number | ATWBT-210-FPD |
| Balancing Range | 14-inch rims to 300 lbs. tires |
| Shaft Diameter | 40 mm |
| Balancing Modes | Static, Dynamic |
9. Warranty and Support
For warranty information, technical support, or to order replacement parts, please refer to the documentation included with your purchase or contact ATLAS Automotive Equipment directly. Ensure you have your model number (WBT-210) and serial number ready when contacting support.
