mDesign 17126MDHS
mDesign L-Shape Home Office Corner Desk with Shelves
Model: 17126MDHS
Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your mDesign L-Shape Home Office Corner Desk with Shelves. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The mDesign L-Shape Home Office Corner Desk, featuring a light natural wood top and white metal frame, with integrated shelving on the shorter side.
Safety Information
- Always assemble the desk on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use.
- Do not overload the desk or shelves. The maximum weight recommendation for the desk is 50 pounds.
- Keep small parts away from children during assembly.
- Periodically check all connections to ensure they remain tight.
- Avoid placing hot items directly on the desk surface without protection.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Desk Top (Engineered Wood)
- Metal Frame Components (White Steel)
- Shelf Boards (Engineered Wood)
- Assembly Hardware (Screws, bolts, Allen wrench, etc.)
- Instruction Manual (This document)
Setup and Assembly Instructions
Assembly requires two people for optimal safety and ease. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface. Verify against the package contents list.
- Assemble Frame Sections: Begin by connecting the vertical and horizontal metal frame components using the provided screws and Allen wrench. Do not fully tighten screws until all frame pieces are loosely connected.
- Attach Cross Braces: Secure the diagonal cross braces to the back of the frame sections. These provide stability.
- Install Shelf Supports: Attach the metal supports for the shelves to the designated frame section.
- Place Shelf Boards: Carefully place the engineered wood shelf boards onto their supports.
- Attach Desk Top: Position the L-shaped engineered wood desk top onto the assembled frame. Align the pre-drilled holes in the desk top with the holes in the frame.
- Secure Desk Top: Insert and tighten all screws to secure the desk top to the frame.
- Final Tightening: Once all components are in place, go back and fully tighten all screws and fasteners.
- Position Desk: Carefully move the assembled desk to its desired location.
Image: A close-up view highlighting the water-resistant surface of the desk top, the integrated storage shelves, and the sturdy white steel frame construction.
Operating Instructions
The mDesign L-Shape Home Office Corner Desk is designed for residential use in various rooms such as bedrooms, dormitories, living rooms, and offices. Its L-shape design is ideal for corner placement, maximizing space efficiency.
- Weight Capacity: The desk surface can support up to 50 pounds. The shelves are designed for lighter items such as books, small decor, or office supplies.
- Placement: Position the desk on a flat, stable surface.
- Cable Management: Utilize the open design to manage cables for computers and other electronics.
Video: An overview of mDesign's metal and wood workspace solutions, showcasing various furniture pieces including desks and shelving units that complement the L-shape desk design.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Spills: Wipe up spills immediately to prevent damage to the engineered wood surface.
- Inspection: Periodically inspect all hardware for tightness and re-tighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk is wobbly | Loose fasteners; uneven floor. | Ensure all screws are fully tightened. Adjust desk position or use shims under legs if the floor is uneven. |
| Parts do not align during assembly | Incorrect orientation of parts; screws overtightened prematurely. | Review assembly steps and diagrams. Loosen all screws, adjust alignment, then gradually tighten. |
| Scratches on surface | Sharp objects; abrasive cleaning. | Use desk mats or coasters. Clean with soft cloths only. Minor scratches may be concealed with furniture markers. |
Specifications
- Brand: mDesign
- Model Number: 17126MDHS
- Product Dimensions (D x W x H): 28.74" x 47.27" x 29.53" (73cm x 120cm x 75cm)
- Color: White frame, Light Natural Wood top
- Style: Modern
- Base Material: Steel, MDF
- Top Material Type: Engineered Wood
- Item Weight: 33.9 Pounds
- Maximum Weight Recommendation: 50 Pounds
- Shape: L-Shape
- Number Of Shelves: 2
- Required Assembly: Yes
- Mounting Type: Floor Mount
Image: A detailed diagram showing the dimensions of the mDesign L-Shape Home Office Corner Desk, including width, depth, and height measurements for both the main desk surface and the integrated shelving unit.
Warranty and Support
For warranty information or customer support, please refer to the manufacturer's website or contact their customer service department directly. Keep your purchase receipt for any warranty claims.
Manufacturer: mDesign
Website: Visit the mDesign Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.