Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your Kela Style 22494 Toilet Brush and Toilet Paper Holder Stand. Designed for practicality and style, this unit combines a toilet brush holder with a toilet paper dispenser and storage for spare rolls. Please read these instructions carefully before use to ensure proper setup and longevity of your product.
Image: The Kela Style 22494 Toilet Brush and Toilet Paper Holder Stand, showcasing its sleek design and functionality with a toilet paper roll and spare rolls in place.
Package Contents
Please verify that all components are present before beginning assembly.
- Main Stand Base and Vertical Rods
- Toilet Paper Holder Arm
- Frosted Glass Separating Disc
- Toilet Brush Holder Cup
- Toilet Brush with Handle
- Assembly Hardware (screws, washers, etc. if applicable)
Image: An exploded view diagram illustrating the main components of the toilet set, including the metal frame (1) and the stainless steel brush holder (2), along with dimensions and the frosted glass separating disc.
Setup and Assembly
The Kela Style 22494 stand is designed for straightforward assembly. Refer to the assembly diagram for visual guidance.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Base: Attach the vertical support rods to the base plate using the provided hardware. Ensure all connections are secure.
- Install Toilet Paper Holder Arm: Secure the toilet paper holder arm to the upper vertical rod.
- Attach Frosted Glass Disc: Position the frosted glass separating disc between the main vertical rods and secure it according to the diagram.
- Place Brush Holder: Insert the toilet brush holder cup into its designated position at the base of the stand.
- Insert Toilet Brush: Place the toilet brush into the holder cup.
- Position Stand: Place the assembled stand on a flat, stable surface in your desired bathroom location.
Operating Instructions
This stand provides convenient access to toilet paper and a toilet brush.
- Loading Toilet Paper: Slide a standard toilet paper roll onto the upper horizontal arm.
- Storing Spare Rolls: The lower section of the stand, behind the frosted glass disc, is designed to hold spare toilet paper rolls. Simply place additional rolls in this area for easy access.
- Using the Toilet Brush: The integrated toilet brush is for cleaning the toilet bowl. After use, place the brush back into its holder.
Image: The Kela Style 22494 stand positioned in a bathroom, demonstrating its function with a toilet paper roll on the dispenser and spare rolls stored below.
Care and Maintenance
Proper care will ensure the longevity and appearance of your Kela Style stand.
- Cleaning the Metal Parts: The stand is made of steel chrome. Clean regularly with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads, which can damage the glossy finish. Dry thoroughly after cleaning to prevent water spots.
- Cleaning the Frosted Glass: Wipe the frosted glass disc with a soft cloth and a glass cleaner.
- Cleaning the Toilet Brush: Rinse the toilet brush thoroughly after each use. Periodically, the brush head can be cleaned with a disinfectant. The brush holder cup should also be cleaned regularly with a disinfectant and rinsed.
- Replacement: The toilet brush head is replaceable. Contact Kela customer service or visit their website for replacement parts.
Troubleshooting
If you encounter any issues with your Kela Style stand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand feels wobbly or unstable. | Loose connections or uneven surface. | Ensure all screws are tightened. Place the stand on a flat, level surface. |
| Scratches or dullness on chrome finish. | Abrasive cleaning materials or harsh chemicals used. | Use only soft cloths and mild, non-abrasive cleaners. Avoid abrasive pads. |
| Toilet brush not cleaning effectively. | Worn brush head. | Replace the toilet brush head. |
Product Specifications
| Brand | Kela |
| Model Number | 22494 |
| Material | Steel Chrome |
| Finish Type | Glossy |
| Color | Sliver |
| Installation Type | Freestanding Stand |
| Dimensions (H x W x D) | 71 cm (Height) x 26 cm (Width) x 18 cm (Depth) - Approx. 27.95" H x 10.24" W x 7.09" D |
| Item Weight | 3.12 Kilograms |
| Included Components | Toilet Set (Stand, Toilet Paper Holder, Spare Roll Holder, Toilet Brush) |
Image: The Kela Style 22494 stand shown next to a person for scale, highlighting its 71 cm height.
Warranty Information
Specific warranty details for the Kela Style 22494 Toilet Brush and Toilet Paper Holder Stand are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, please refer to the official Kela website or contact their customer service.
Customer Support
For further assistance, technical support, or inquiries regarding replacement parts, please contact Kela customer service. You can typically find contact information on the official Kela website or through the retailer where the product was purchased.
Kela Official Website: www.kela.de (Please note: This link is provided as a general reference. Specific regional websites may vary.)
