UTV Stereo Can-Am Maverick X3 Big Battery Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your UTV Stereo Can-Am Maverick X3 Big Battery Kit. This kit is designed to upgrade your vehicle's power system, providing enhanced capacity for accessories while ensuring reliable starting power.

The UTV Stereo Can-Am Maverick X3 Big Battery Kit is engineered to replace your OEM starting battery with a high-performance UTVS1200 Platinum Series AGM Battery and includes a custom mounting bracket for a secure fit. This upgrade significantly increases cold cranking amps and overall power capacity, crucial for running various accessories during your rides.

2. Product Overview

The UTV Stereo Can-Am Maverick X3 Big Battery Kit is an essential upgrade for UTV enthusiasts. It offers:

• Enhanced Power: The UTVS1200 AGM battery provides more than double the cold cranking amps compared to the OEM battery (OEM: 270cca).
• Accessory Support: Built to provide ample power for accessories during rides, preventing strain on the primary starting system.
• Custom Fit: Includes a custom mounting bracket for seamless integration into your Can-Am Maverick X3.

3. Components Included

Verify that all the following components are included in your kit:

• 1x UTVS1200 AGM Battery
• 1x Custom Battery Mounting Bracket (Red)
• 1x Triangle Bracket (Red)
• 1x 1" Grade 8 Bolt
• 1x Lock Washer
• 3x Washers
• 2x 1/4" Button Head Bolts
• Mounting Hardware (screws, nuts)

4. Setup & Installation

Safety First: Always disconnect the negative terminal of your existing battery before beginning any electrical work. Wear appropriate safety gear, including gloves and eye protection.

While this product is specifically designed for the Can-Am Maverick X3, the following video demonstrates a similar installation process for a UTV Stereo second battery kit in a Can-Am Defender. The general steps for battery tray placement, wiring, and isolator connection are applicable.

Installation Steps:

1. Prepare the Vehicle: Ensure the vehicle is off and the existing battery's negative terminal is disconnected. Remove any panels or components necessary to access the battery compartment.
2. Install Battery Tray: Position the custom battery tray in the designated location within your Can-Am Maverick X3. Secure it using the provided hardware.
3. Place UTVS1200 Battery: Carefully place the UTVS1200 AGM battery into the installed battery tray.
4. Secure Battery: Use the custom mounting bracket and hardware to firmly secure the battery in place, preventing movement during operation.
5. Connect Wiring: Connect the positive and negative terminals of the UTVS1200 battery according to the wiring diagram provided with your kit. Ensure all connections are tight and secure.
6. Reassemble: Reinstall any panels or components that were removed during the installation process.

5. Operating Instructions

The UTV Stereo Big Battery Kit is designed to provide additional power for your accessories without compromising your vehicle's starting battery. The system operates with an automatic isolation feature:

• When the vehicle is running, both the starting battery and the UTVS1200 accessory battery are charged.
• When the vehicle is off, the UTVS1200 accessory battery is automatically isolated from the starting battery. This allows you to run accessories (lights, audio, etc.) from the UTVS1200 battery without draining your starting battery.
• Should the UTVS1200 battery become fully discharged, your starting battery will remain fully charged, ensuring you can always start your vehicle.

The following video provides a spotlight on the functionality of a UTV Stereo second battery kit, explaining the isolation principle.

6. Maintenance

Proper maintenance is crucial for maximizing the lifespan and performance of your UTVS1200 AGM battery. Neglecting battery maintenance can lead to premature failure and reduced efficiency.

• Regular Charging: If your UTV is stored for extended periods, ensure the battery is kept charged. AGM batteries benefit from a trickle charger or battery maintainer.
• Clean Terminals: Periodically inspect and clean battery terminals to prevent corrosion. Use a wire brush and a mixture of baking soda and water if corrosion is present.
• Check Connections: Ensure all battery connections are tight and secure. Loose connections can lead to poor performance and potential damage.

UTV Stereo recommends using a dual bank charger to expand the life and performance of your batteries.

7. Troubleshooting

If you encounter issues with your UTV Stereo Big Battery Kit, consider the following:

• Accessories Not Powering On: Check all wiring connections to the UTVS1200 battery and the isolator. Ensure the battery is adequately charged.
• Starting Issues: If the vehicle does not start, verify that the primary starting battery is fully charged and its connections are secure. The isolation system is designed to protect the starting battery.
• Isolator Not Clicking: If the isolator does not click when the ignition is turned on, check the wiring to the isolator and ensure it is receiving power.
• Corrosion on Terminals: Clean any corrosion from the battery terminals using a wire brush and a baking soda/water solution. Apply dielectric grease to prevent future corrosion.

8. Specifications

9. Warranty Information

For specific warranty details regarding your UTV Stereo Can-Am Maverick X3 Big Battery Kit, please refer to the warranty card included with your product or visit the official UTV Stereo website. Keep your proof of purchase for any warranty claims.

10. Support & Contact

If you require further assistance or have questions not covered in this manual, please contact UTV Stereo customer support. Contact information can be found on the official UTV Stereo website or on your product packaging.