Arteck Car Jump Starter User Manual

1. Introduction

The Arteck Car Jump Starter is a versatile and powerful device designed to provide emergency jump-starting for vehicles and serve as a portable power bank for electronic devices. With a 18000mAh capacity and 1500A peak current, it can jump-start 12V automotive batteries (up to 8.0L Gas or 6.5L Diesel engines) multiple times on a single charge. It also features a USB-C port for charging mobile devices and an integrated LED flashlight with multiple modes.

Key Features:

• Car Jump Starter: Capable of jump-starting vehicles up to 20 times on a single charge, supporting up to 8.0L Gasoline or 6.5L Diesel engines with built-in heavy-duty clamps and cables.
• External Battery Charger: 18000mAh capacity to charge phones, tablets, and other devices at speeds up to 4.2 amps via Smart IC USB outputs.
• Safety Protection: Equipped with premium cells, circuitry, and safety features to protect against surges or short circuits.
• LED Light: Features an ultra-bright LED flashlight with 3 illumination modes: constant light, strobe light, and SOS signal flash, lasting up to 120 hours.

Image: The Arteck Car Jump Starter, highlighting its compatibility with 6.5L Diesel and 8L Gas engines, emphasizing its powerful jump-starting capability.

2. Package Contents

Please check the package contents upon unboxing to ensure all items are present:

• Arteck Multi-Functional Car Jump Starter (Main Unit)
• Compact Carrying Box
• Jumper Leads (Smart Clamps)
• Wall Charger (AC Adapter)
• Car Charger
• USB Cables
• User Manual (this document)

Image: A visual representation of the Arteck Car Jump Starter package contents, showing the main unit, jumper cables, various charging cables, and a compact carrying case.

3. Product Overview

Familiarize yourself with the components and ports of your Arteck Car Jump Starter:

Image: A detailed diagram of the Arteck Car Jump Starter, pointing out key features such as the Jump Start Socket, ON/OFF Switch, USB-C Input, USB Output ports, Power Button, LCD Display, and the Bright LED Light.

• Jump Start Socket: Port for connecting the jumper cables.
• ON/OFF Switch: Controls the main power of the device.
• USB-C Input: Used for recharging the jump starter unit.
• USB Output (x2): Ports for charging external electronic devices.
• Power Button: Activates the device and cycles through functions.
• LCD Display: Shows battery percentage and status.
• Bright LED Light: Multi-mode flashlight.

4. Initial Setup and Charging

Before first use, or if the device has been stored for a long period, fully charge your Arteck Car Jump Starter.

1. Connect the provided AC adapter or car charger to the USB-C Input port on the jump starter.
2. Plug the charger into a wall outlet or your vehicle's 12V accessory socket.
3. The LCD display will show the charging progress. The device typically recharges in approximately 4 hours.
4. Once fully charged, disconnect the charger.

It is recommended to keep the device charged above 50% for optimal performance, especially before attempting to jump-start a vehicle.

5. Operating Instructions: Jump Starting a Vehicle

Follow these steps carefully to jump-start a vehicle:

1. Check Battery Capacity: Ensure the Arteck Car Jump Starter's battery capacity is above 50% as indicated on the LCD display.
2. Connect Jumper Cables to Device: Plug the jumper cables into the barrel socket of the Arteck device. Ensure a secure connection.
3. Connect Clamps to Car Battery:
   WARNING: Always connect the BLACK clamp to the negative (-) terminal of the car battery first.
   Then, connect the RED clamp to the positive (+) terminal of the car battery.
   DO NOT touch the RED and BLACK cable clamps together or connect both cable clamps to the same piece of metal.
4. Start the Engine: Now, attempt to crank start the vehicle's engine.
5. If Engine Does Not Start:
   WARNING: If the engine does not start immediately on the first try, disconnect the jumper cables from the car battery and wait at least 10 seconds before reconnecting them and attempting again.
6. Disconnect Cables: Once the engine has successfully started, disconnect the jumper cable clamps immediately from the car battery, then from the Arteck device.

IMPORTANT: Please keep away from children at all times!

Image: A visual guide demonstrating the correct procedure for jump-starting a vehicle with the Arteck Car Jump Starter, including connecting the red and black clamps to the battery terminals and the sequence of operations.

6. Operating Instructions: Using as a Power Bank

The Arteck Car Jump Starter can also function as a portable power bank to charge your electronic devices.

1. Turn on the Arteck device using the ON/OFF switch or Power button.
2. Connect your electronic device (smartphone, tablet, camera, etc.) to one of the USB Output ports using a compatible USB cable.
3. The device will begin charging automatically. The LCD display may show the remaining battery percentage.
4. Disconnect your device once charging is complete.

Image: The Arteck Car Jump Starter connected and charging various electronic devices such as smartphones and tablets, demonstrating its capability as a high-speed external battery charger.

7. Operating Instructions: LED Flashlight

The built-in LED flashlight offers three illumination modes for various situations.

1. Turn on the Arteck device using the ON/OFF switch or Power button.
2. Press and hold the Power button for a few seconds to turn on the LED flashlight (constant light mode).
3. Press the Power button again to cycle through the modes: constant light > strobe light > SOS signal flash.
4. To turn off the flashlight, press the Power button until the light turns off, or press and hold the Power button again.

Image: The Arteck Car Jump Starter with its bright LED flashlight activated, illustrating its utility as an emergency light source with multiple modes.

8. Safety Warnings and Precautions

To ensure safe operation and prevent damage to the device or injury, please observe the following safety warnings:

• Children: Keep the device and all accessories away from children at all times.
• Polarity: Always connect the BLACK clamp to the negative (-) terminal first, then the RED clamp to the positive (+) terminal. Incorrect polarity can cause sparks, damage, or injury.
• Short Circuit: Do not allow the RED and BLACK cable clamps to touch each other or connect both clamps to the same piece of metal. This will cause a short circuit.
• Battery Capacity: Ensure the jump starter's battery is above 50% before attempting to jump-start a vehicle.
• Engine Cranking: If the engine does not start on the first attempt, disconnect the clamps, wait at least 10 seconds, and then reattempt. Do not continuously crank the engine.
• Immediate Disconnection: Disconnect the jumper cables immediately after the vehicle engine starts.
• Temperature: Do not expose the device to extreme temperatures (above 60°C/140°F or below -20°C/-4°F).
• Water: Do not immerse the device in water or expose it to heavy rain.
• Disassembly: Do not attempt to disassemble, modify, or repair the device yourself. Refer to qualified service personnel.
• Ventilation: Ensure adequate ventilation when operating the device.

9. Maintenance and Storage

Proper maintenance and storage will prolong the life of your Arteck Car Jump Starter:

• Charging: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
• Cleaning: Clean the device with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage Temperature: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Storage Location: Keep the device in its compact carrying box when not in use to protect it from dust and physical damage.
• Cable Care: Inspect jumper cables and clamps regularly for any signs of wear or damage. Replace if necessary.

10. Troubleshooting

If you encounter issues with your Arteck Car Jump Starter, refer to the following common problems and solutions:

11. Specifications

12. Warranty and Support

For warranty information, technical support, or customer service inquiries, please refer to the warranty card included with your product or visit the official Arteck website. Keep your purchase receipt as proof of purchase for warranty claims.

Arteck Official Store: Visit the Arteck Store on Amazon