JJC 30 Slots Micro SD Card Case Instruction Manual

1. Product Overview

The JJC 30 Slots Micro SD Card Case is designed to provide secure and organized storage for your Micro SD cards. Constructed from durable ABS and silicone materials, this case offers protection against water, dust, and physical impact, ensuring the safety of your valuable data.

Figure 1: JJC 30 Slots Micro SD Card Case (closed)

Key Features:

• High Capacity: Stores up to 30 Micro SD cards.
• Water Resistant: Features an ABS and silicone construction to protect against moisture.
• Shockproof: High-impact ABS plastic material provides robust protection against drops and impacts.
• Secure Locking: Equipped with an ergonomic locking design for reliable closure.
• Soft Lining: Interior foam padding ensures cards are held snugly and protected from scratches.
• Compact Size: Slim design for easy portability in bags or pockets.

2. Setup and Card Insertion

To begin using your JJC Micro SD Card Case, follow these steps for proper card insertion and removal.

2.1 Opening the Case

1. Locate the latch on the side of the case.
2. Gently push the latch outwards to release the cover.
3. Open the case to reveal the card slots.

Figure 2: Opening the case using the side latch.

2.2 Inserting Micro SD Cards

1. Identify the Micro SD card slots within the foam interior.
2. Align your Micro SD card with an empty slot, ensuring the contact pins face downwards.
3. Gently press the card into the foam slot until it is securely held. The foam is designed to provide a snug fit.

Figure 3: Inserting a Micro SD card into its designated slot.

2.3 Removing Micro SD Cards

1. Gently push on the edge of the Micro SD card to slightly dislodge it from the foam.
2. Carefully pull the card upwards to remove it from the slot.

Figure 4: Removing a Micro SD card from the case.

3. Operating the Case

The case is designed for ease of use while ensuring maximum protection for your memory cards.

3.1 Securing the Case

1. Once all cards are inserted, close the two halves of the case.
2. Press firmly on the side latch until it clicks into place, indicating a secure closure.

Figure 5: Closing the case securely.

3.2 Water and Dust Resistance

The case features a silicone O-ring seal along its perimeter, providing water and dust resistance. This seal helps protect your cards from environmental elements.

Figure 6: Water-resistant design with silicone O-ring seal.

4. Maintenance

Proper maintenance ensures the longevity and effectiveness of your card case.

4.1 Cleaning

• Wipe the exterior of the case with a soft, damp cloth.
• For the interior foam, use a dry, soft brush or compressed air to remove dust and debris.
• Avoid using harsh chemicals or abrasive materials, as these may damage the case or its seal.

4.2 Storage

• Store the case in a cool, dry place away from direct sunlight and extreme temperatures.
• Ensure the case is securely closed when not in use to maintain its protective properties.

5. Troubleshooting

5.1 Cards Not Fitting Snugly

• Ensure you are inserting Micro SD cards into the correct slots. The foam is precisely cut for Micro SD cards.
• Apply gentle, even pressure when inserting. Do not force cards into slots.

5.2 Case Not Closing Properly

• Check that no cards or debris are obstructing the closing mechanism or the silicone seal.
• Ensure the silicone O-ring is properly seated in its groove around the case perimeter.

6. Specifications

Figure 7: External dimensions and compact design.

7. Official Product Videos

Watch these official videos for additional information and demonstrations of the JJC 30 Slots Micro SD Card Case.

8. Warranty and Support

For warranty information or product support, please refer to the manufacturer's official website or contact their customer service directly. Specific warranty terms may vary by region and retailer.