Costco 1600329

Costco Sunforce 2000 Lumen LED Motion Activated Solar Security Light Instruction Manual

Model: 1600329

Brand: Costco

Introduction

The Costco Sunforce 2000 Lumen LED Motion Activated Solar Security Light is designed to provide efficient and reliable outdoor illumination and enhanced security. Powered by sunlight, this unit features dual brightness settings and adjustable lamp heads for optimal coverage. Its weather-resistant design ensures durability and minimal maintenance.

Key Features:

  • Adjustable lamp heads for maximum lighting coverage.
  • Dual brightness feature: 1000 lumens or 2000 lumens.
  • Amorphous solar panel for charging in all daylight conditions.
  • Adjustable motion detection distance and light duration settings.
  • Easy installation with no assembly required for the main unit.
Costco Sunforce 2000 Lumen LED Motion Activated Solar Security Light with separate solar panel

Image: The Sunforce 2000 Lumen LED Motion Activated Solar Security Light, showing the main light unit with adjustable heads and the separate solar panel.

Package Contents

Verify that all components are present in the package:

  • Solar motion activated security light unit
  • Solar panel with 4.5 m (14.7 ft) of wire
  • 2 x 3.7V rechargeable lithium-ion batteries (pre-installed)
  • Mounting hardware (screws and anchors)
  • Instruction Manual
Close-up of the solar panel for the security light

Image: A close-up view of the solar panel, which charges the security light's batteries.

Setup and Installation

Initial Battery Charge:

Prior to first use, ensure the solar panel is connected to the light unit. The unit must be charged for a period of three days in the OFF position. This initial charge ensures the included rechargeable lithium-ion batteries are fully conditioned for optimal performance. After the third day, the batteries will be fully charged, and the light is ready for operation.

Mounting the Light Unit:

The security light unit is designed for flush mount installation. Select a location that provides the desired lighting coverage and allows for easy adjustment of the lamp heads and motion sensor. Use the provided mounting hardware to securely attach the light unit to a stable surface such as a wall or ceiling.

Mounting the Solar Panel:

The solar panel should be mounted in a location that receives maximum direct sunlight throughout the day. The 4.5-meter (14.7 ft) wire provides flexibility for optimal panel placement, even if the light unit is in a shaded area. Use the provided screws to secure the solar panel's base.

Solar security light installed above a garage door during daytime

Image: The security light installed above a garage door, demonstrating a typical outdoor mounting location.

Operating Instructions

The security light features three adjustable switches located on the motion sensor unit, allowing customization of its operation.

Adjusting Settings:

  1. Time/Test Switch: This switch controls how long the light remains on after motion is detected. It also includes a 'Test' mode for initial setup.
    • Test: For initial setup and testing.
    • 30 Seconds (30S): Light stays on for 30 seconds.
    • 60 Seconds (60S): Light stays on for 60 seconds.
    • 120 Seconds (120S): Light stays on for 120 seconds.
  2. Distance Switch: This switch adjusts the sensitivity of the motion sensor, controlling the detection range.
    • Low (L): Shorter detection distance.
    • Medium (M): Medium detection distance.
    • High (H): Longest detection distance.
  3. Brightness (Lumens) Switch: This switch sets the light output level.
    • 2000 LM: Maximum brightness.
    • OFF: Light remains off (use for initial charging).
    • 1000 LM: Reduced brightness for extended battery life.
Close-up of the three adjustable switches on the motion sensor unit

Image: Detail of the control switches for time, distance, and brightness settings.

Adjustable Lamp Heads:

The two lamp heads can be independently adjusted to direct light precisely where needed, maximizing coverage for entryways, garages, pathways, sheds, and other remote areas.

Solar security light illuminating a garage area at night

Image: The security light actively illuminating a garage area at night, demonstrating its effective coverage.

Maintenance

The Costco Sunforce Solar Security Light is designed to be largely maintenance-free due to its weather-resistant (IP44) construction.

  • Cleaning: Periodically wipe the solar panel and light unit with a soft, damp cloth to remove dust, dirt, or debris that may accumulate and reduce charging efficiency. Avoid abrasive cleaners.
  • Battery Replacement: The unit uses 2 x 3.7V rechargeable lithium-ion batteries. While designed for longevity, if the light's performance significantly diminishes over time, the batteries may need replacement. Refer to the internal battery compartment for specific battery type and replacement instructions.
  • Solar Panel Placement: Ensure the solar panel remains unobstructed by leaves, snow, or other objects to guarantee optimal sunlight exposure for charging.

Troubleshooting

Problem Possible Cause Solution
Light does not turn on at night. Insufficient initial charge; Solar panel not receiving enough sunlight; Batteries are depleted or faulty; Unit is in OFF mode. Ensure initial 3-day charge is completed. Reposition solar panel for maximum direct sunlight. Check battery connections and consider replacement if old. Verify the brightness switch is not in the 'OFF' position.
Light is dim or only stays on for a short period. Insufficient battery charge; Cold weather conditions affecting battery performance. Allow more time for solar charging. Ensure solar panel is clean. Battery performance can be reduced in extreme cold; normal operation should resume in warmer temperatures.
Motion sensor is not detecting movement or is too sensitive. Distance setting is incorrect; Obstructions in sensor's field of view. Adjust the 'Distance' switch to the appropriate sensitivity level. Clear any objects that might be blocking the sensor's view or causing false triggers.

Specifications

  • Brand: Costco
  • Model Number: 1600329
  • Brightness: 1000 Lumens / 2000 Lumens (adjustable)
  • Light Source Type: LED
  • Color: White
  • Material: Plastic, Glass
  • Power Source: Solar Powered
  • Voltage: 4 Volts
  • Wattage: 10 watts
  • Product Dimensions: 7.87"L x 6.3"W x 3.54"H
  • Item Weight: 3.19 pounds (1.45 Kilograms)
  • Water Resistance Level: IP44 (Weather Resistant)
  • Special Feature: Motion Sensor
  • Included Components: Solar motion activated security light, Solar panel with 4.5 m (14.7 ft) wire, 2 x 3.7V rechargeable lithium-ion batteries, Mounting hardware.
  • Recommended Uses: Outdoor (Entryways, Garages, Pathways, Sheds, Remote Areas)

Warranty and Support

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official Costco website. Keep your purchase receipt for any warranty claims.

Related Documents - 1600329

Preview Costco Membership Amendment Form and Regulations
Official form for amending Costco wholesale membership details, including personal data protection, membership rules, fees, renewal, and guarantees.
Preview Costco Battery Limited Warranty
Details the limited warranty provided by Costco Wholesale for batteries, covering terms, conditions, exclusions, and claims process for passenger vehicles and other applications.
Preview Costco Smart Screening Guide: Non Foods Quality Assurance
An overview of the Costco Smart Screening (CSS) program, detailing its purpose, Restricted Substance Lists (RSLs), approved certifications, compliant suppliers, and FAQs for ensuring product safety and compliance.
Preview Animated Holiday Train with Lights and Music Product Manual
This product manual provides instructions, safety warnings, and troubleshooting tips for the Animated Holiday Train with Lights and Music, a decorative indoor seasonal product distributed by Costco.
Preview Fabric Reclining Sectional Assembly and Care Instructions
This document provides assembly, care, and warranty information for the Fabric Reclining Sectional, model ITM. / ART. 1434694. It includes instructions in English, French, and Spanish, along with maintenance tips and safety warnings.
Preview Leather Pushback Recliner Assembly and Care Instructions
Detailed instructions for assembling, caring for, and maintaining the Leather Pushback Recliner. Includes safety warnings and contact information for customer service.