Product Overview
The PETLIBRO Automatic Pet Feeder (Model PLAF003) is designed to provide convenient and precise feeding for your small to medium-sized pets. With its advanced features, you can ensure your pet receives the right portions at the right time, promoting healthy eating habits and offering peace of mind.
Image: PETLIBRO Automatic Pet Feeder, grey model, with food in the bowl.
- Up to 6 meals daily with 1-50 portions (15ml each).
- Large 6L food tank capacity.
- Clog-free design with rotating impeller.
- Low food LED indication and infrared sensor to prevent overfilling.
- 10-second voice recorder for personalized meal calls.
- Dual power supply: 5V DC adapter with 3 D-cell battery backup (batteries not included).
Setup and Assembly
Follow these steps to set up your PETLIBRO Automatic Pet Feeder:
- Unpack the Feeder: Carefully remove all components from the packaging, including the main feeder unit, food tray, and power adapter.
Image: The feeder unit and its components, ready for assembly.
- Install the Food Tray: Slide the food tray into the designated slot at the base of the feeder until it clicks securely into place.
Image: A dog interacting with the feeder, showing the twist-lock lid.
- Power Connection:
- Connect the 5V DC power adapter to the feeder's power socket and plug it into a wall outlet.
- For backup power, open the battery compartment at the bottom of the feeder and insert 3 D-cell alkaline batteries (not included). This ensures continuous feeding during power outages.
Image: Internal view of the feeder showing the battery compartment and power connection.
- Fill the Food Tank: Open the twist-lock lid on top of the feeder and pour dry pet food into the tank. Ensure kibble size is between 0.07-0.6 inches (2-15mm) in diameter. The 6L capacity can hold a significant amount of food. Securely close the lid to maintain freshness.
Image: The feeder highlighting its 6L capacity.
Setup Video Guide:
Video: PETLIBRO Automatic Cat Feeder Instructions. This video demonstrates the assembly and initial setup of the feeder.
Operating Instructions
The LCD panel and intuitive buttons make programming your feeder straightforward.
1. Setting the Current Time
- Press and hold the Settings button (gear icon) for 3 seconds to unlock the panel.
- Use the Up and Down arrows to adjust the hour and minute. Press OK to confirm each setting.
Image: Close-up of the feeder's LCD display and control buttons.
2. Programming Meal Times and Portions
- After setting the current time, press OK to enter meal setting mode.
- Use the Up and Down arrows to select the meal number (up to 6 meals).
- Press OK to set the portion size (1-50 portions).
- Press OK again to set the meal time (hour and minute).
- Repeat for all desired meals. Press OK to save settings after each meal.
Image: Visual representation of setting a customizable feeding schedule for your pet.
Operating Video Guide:
Video: PETLIBRO Feed the Right Portion at the Right Time. This video illustrates how to program meal times and portions.
3. Personalized Voice Recording
- Press and hold the Microphone button for 3 seconds until you hear a beep.
- Record your 10-second message. Release the button to finish recording.
- Press the Microphone button once to play back your recording.
Image: A dog looking at the feeder, illustrating the personalized voice recording feature.
4. Manual Feeding
- To dispense a single portion manually, press the Manual Feed button (paw print icon) twice quickly.
- To dispense multiple portions manually, enter the setting mode (long press Settings button), then press the Manual Feed button to select the desired number of portions. Press OK to dispense.
Maintenance
Regular cleaning and proper food storage are essential for the longevity and hygiene of your feeder.
- Cleaning: The food tank and food tray are removable for easy cleaning. Wash them with mild soap and water, then rinse thoroughly and dry completely before reassembling. Do not immerse the main unit in water.
Image: Disassembled feeder components showing ease of cleaning.
- Food Storage: The twist-lock lid helps keep dry food fresh, crunchy, and secure from pets. Ensure the lid is always properly sealed after refilling.
Image: Close-up of the twist-lock lid, emphasizing its sealing function.
- Kibble Size: Use dry kibble only, with a diameter between 2-15mm (0.07-0.6 inches). This ensures optimal dispensing and prevents clogging.
Image: Diagram illustrating recommended kibble sizes for the feeder.
Troubleshooting
| Issue | Possible Cause / Solution |
|---|---|
| Feeder not dispensing food. |
|
| Low Food LED Indication (E-1) is on. | The food tank is low or empty. Replenish food in time. The built-in infrared sensor detects insufficient food. |
| Voice recording is unclear or not playing. | Re-record the message, ensuring you speak clearly and are close enough to the microphone. Check if the recording is saved correctly. |
| Feeder is not responding to button presses. | The panel might be locked. Press and hold the Settings button (gear icon) for 3 seconds to unlock. |
Specifications
| Model Name | PLAF003 |
| Capacity | 6L |
| Material | Polyethylene Terephthalate (BPA-Free) |
| Power Supply | 5V DC Adapter (Primary), 3 x D-cell Batteries (Backup, not included) |
| Max Meals/Day | 6 |
| Portions/Meal | 1-50 (approx. 15ml per portion) |
| Recommended Kibble Size | 2-15mm (0.07-0.6 inches) |
| Dimensions (LxWxH) | 9.5 x 7.7 x 14.2 inches |
| Item Weight | 3.97 Pounds |
Warranty and Support
This PETLIBRO Automatic Pet Feeder comes with a 24 Months Warranty from the date of purchase.
For any product inquiries, technical support, or warranty claims, please contact PETLIBRO customer service through their official website or the platform where you purchased the product. Please have your model number (PLAF003) and proof of purchase ready.
