Introduction
This manual provides instructions for assembling and maintaining your KAWADA Nanoblock Buffalo Man NBCC_118 building set. The Nanoblock series features miniature building blocks, offering a detailed and engaging construction experience.
This model, NBCC_118 Buffalo Man, is part of the popular Kinnikuman series. It consists of 230 pieces and has a difficulty level of 3, indicating a moderate challenge for builders.
Safety Information: Contains small parts. Not suitable for children under 3 years of age due to choking hazards. Recommended for ages 12 years and up.
Image: The product box for Nanoblock Buffalo Man NBCC_118, displaying the assembled model and key product information.
What's in the Box
Upon opening your Nanoblock Buffalo Man NBCC_118 package, you should find the following components:
- Nanoblock pieces for Buffalo Man (approximately 230 pieces)
- Assembly instructions booklet
Setup (Assembly Instructions)
Carefully unpack all components. Refer to the included assembly instructions booklet for detailed, step-by-step guidance on constructing your Nanoblock Buffalo Man model. It is crucial to follow the sequence provided in the booklet to ensure correct assembly.
Separate pieces by color and shape before beginning to simplify the process. Pay close attention to the orientation of each block as shown in the diagrams within the instruction booklet.
Image: Front view of the fully assembled Nanoblock Buffalo Man model, showcasing its intricate details.
Operating (Display and Handling)
Once assembled, your Nanoblock Buffalo Man model is designed for display. Place it on a stable, flat surface away from direct sunlight and extreme temperatures to prevent material degradation and color fading.
Handle the model with care to avoid accidental disassembly. While Nanoblocks are designed to fit securely, excessive force or dropping can cause pieces to detach. It is not intended as a toy for rough play.
Image: Side view of the fully assembled Nanoblock Buffalo Man model, highlighting its three-dimensional construction.
Maintenance
To keep your Nanoblock model clean, gently dust it with a soft, dry brush or a microfiber cloth. Avoid using water or chemical cleaners, as these can damage the blocks or printed details.
For stubborn dust in crevices, a can of compressed air can be used carefully. Ensure the model is stored in a clean, dry environment when not on display to prevent dust accumulation and maintain its appearance.
Troubleshooting
Missing Pieces
If you find any pieces are missing from your set, first double-check the packaging and assembly area thoroughly. Small Nanoblock pieces can be easily overlooked. If pieces are genuinely missing, please contact KAWADA customer support with your model number (NBCC_118) and details of the missing parts.
Difficulty Connecting Pieces
Ensure pieces are correctly aligned before applying gentle, even pressure. Nanoblocks are precision-engineered, and forcing misaligned pieces can cause damage. Refer to the instruction booklet to confirm correct piece orientation and connection points.
Product Specifications
| Model Number | NBCC_118 |
| Brand | KAWADA |
| Product Dimensions | 1.65 x 2.2 x 2.91 inches |
| Item Weight | 0.704 ounces |
| Number of Pieces | 230 |
| Difficulty Level | 3 |
| Recommended Age | 12 years and up |
| Release Date | September 25, 2021 |
Warranty Information
Specific warranty details for KAWADA Nanoblock products are typically provided within the product packaging or on the official KAWADA website. Please refer to these resources for comprehensive information regarding product guarantees and return policies.
Customer Support
For further assistance, inquiries about missing parts, or general support, please visit the official KAWADA website or contact their customer service department. Have your model number (NBCC_118) ready when contacting support to expedite the process.