1. Introduction
The Saphe One+ is a compact and intelligent traffic alarm designed to enhance road safety by providing timely warnings about speed cameras and various road hazards. It connects seamlessly with your smartphone via Bluetooth and utilizes a large European traffic community, including data from Blitzer.de, to ensure reliable and up-to-date information. The device operates automatically when you approach your vehicle, requiring no manual activation once set up. It features two intuitive buttons for reporting new speed cameras or hazards, contributing to the community's data accuracy.
Figure 1: The Saphe One+ device. This compact black oval device features the 'saphe one+' logo, a central red indicator light, and blue and red curved lines on either side, indicating its two interactive buttons.
2. Setup Guide
Setting up your Saphe One+ is a straightforward process. Follow these steps to get your device ready for use:
- Unpack the Device: Carefully remove the Saphe One+ device and the adhesive pad from its packaging.
- Download the Saphe Link App: Search for "Saphe Link" in your smartphone's app store (available on both Apple App Store and Google Play Store) and install it.
- Pair with Your Phone:
- Ensure Bluetooth is enabled on your smartphone.
- Open the Saphe Link app and follow the on-screen instructions to pair your Saphe One+ device. The device will automatically connect via Bluetooth when you approach your car.
- Mount the Device:
- Choose a suitable location in your car, such as the dashboard or near the air vent, where the device is easily accessible and visible.
- Clean the surface thoroughly before applying the adhesive pad.
- Attach the adhesive pad to the back of the Saphe One+ and then firmly press it onto the chosen surface in your car.
Figure 2: The Saphe One+ package contents, including the device and a circular adhesive pad.
Figure 3: Side of the Saphe One+ packaging, indicating app availability on Apple App Store and Google Play.
Figure 4: The Saphe One+ device mounted on a car's dashboard, positioned for easy access and visibility.
3. Operating Instructions
The Saphe One+ is designed for intuitive operation, providing automatic warnings and allowing for easy reporting of new incidents.
Automatic Warnings
Once connected, the Saphe One+ automatically warns you of various traffic incidents based on data from the large European traffic community, including Blitzer.de. These warnings include:
- Mobile Speed Cameras
- Stationary Speed Cameras
- Section Control Cameras
- Traffic Light Cameras
- Accidents
- Vehicles on the Hard Shoulder
- General Hazards
Figure 5: The Saphe Link app interface displaying a map with a mobile speed camera warning and a list of various hazard types.
Reporting Incidents
The Saphe One+ features two distinct buttons, allowing you to contribute to the community by reporting new incidents:
- Report Speed Cameras: Press the blue button (top button) to report a new speed camera or a speed measurement.
- Report Hazards/Accidents: Press the red button (bottom button) to report an accident or other road hazards.
Figure 6: Close-up view of the Saphe One+ device, highlighting the blue button for reporting speed cameras and the red button for reporting accidents or hazards.
Figure 7: A user interacting with the Saphe One+ device, demonstrating how to press a button to report an incident.
4. Maintenance
The Saphe One+ requires minimal maintenance. The primary maintenance task is battery replacement.
Battery Replacement
The device uses a CR2450 battery, which typically lasts approximately 2 years. When the battery is low, the device will indicate this (e.g., via the app or a specific light pattern). To replace the battery:
- Gently open the battery compartment on the back of the device.
- Remove the old CR2450 battery.
- Insert a new CR2450 battery, ensuring correct polarity.
- Close the battery compartment securely.
Dispose of old batteries responsibly according to local regulations.
5. Troubleshooting
If you encounter issues with your Saphe One+, refer to the following common problems and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not connect automatically. | Bluetooth is off on phone; App not running in background; Device battery low; Pairing issue. | Ensure Bluetooth is on. Check if Saphe Link app is running or allowed to run in the background. Replace battery if needed. Re-pair the device via the app settings. |
| No warnings received. | No active connection; App permissions (location) not granted; Outdated app data. | Verify device is connected in the app. Check phone's location permissions for the Saphe Link app. Ensure app data is up-to-date (requires internet connection). |
| Phone battery drains quickly. | Continuous GPS usage by the app. | This is a known characteristic as the app uses GPS for location data. Keep your phone charged, especially during long drives. Ensure the app is closed when not in use. |
| Buttons not responding. | Device not connected; Device battery low; Physical damage. | Check connection status in the app. Replace battery. If physical damage is suspected, contact customer support. |
6. Specifications
Key technical specifications for the Saphe One+ device:
- Model Number: 5700002043269
- Dimensions: 6.4 x 3.6 x 1.5 cm (2.52 x 1.42 x 0.59 inches)
- Weight: 24 grams (0.85 ounces)
- Battery: 1 x CR2450 (included)
- Battery Life: Approximately 2 years
- Compatible Devices: Vehicles with Bluetooth support (requires smartphone with Saphe Link app)
- Power Source: Battery
- Voltage: 3 Volts
- Country of Origin: China
7. Support & Warranty
For further assistance or information regarding your Saphe One+ device, please refer to the following resources:
- Official Saphe Store: Visit the official Saphe Store on Amazon for product information and accessories.
- Manufacturer Website: For comprehensive support, FAQs, and contact options, please visit the official Saphe website. (Specific URL not provided in data, but generally available via brand search).
- Legal Notice: The Saphe One+ traffic alarm is developed to increase road safety. Its use is subject to local traffic regulations and is at the user's own risk. Always adhere to local laws regarding the use of such devices.
Information regarding specific warranty terms is typically provided with your purchase documentation. Please retain your proof of purchase for warranty claims.