1. Introduction
The Hafele Loox5 LED 2060 Strip Light is a flexible, dimmable 12V LED lighting solution designed for functional and indirect illumination in various indoor applications, such as closet storage spaces and furniture. This manual provides essential information for the safe and proper installation, operation, and maintenance of your LED strip light.
This product features high-quality Samsung LEDs, a narrow 3/16 inch (5 mm) width, and a high Color Rendering Index (CRI) of >90 for vibrant, true color rendering. It is UL certified and can be shortened at designated intervals.
2. Safety Information
- Electrical Safety: Always disconnect power before installation, maintenance, or troubleshooting. Installation should be performed by a qualified professional if you are unsure.
- Voltage: This LED strip operates on 12V DC. Connecting it to a higher voltage power source will damage the product and void the warranty. A compatible 12V driver (not included) is required.
- Indoor Use Only: This product has an IP20 rating, meaning it is not water-resistant. Do not expose it to moisture or use it in outdoor or wet environments.
- Cutting: Only cut the LED strip at the designated cut marks (every 1 inch / 25 mm). Cutting elsewhere will damage the circuit and render that section unusable.
- Heat: Ensure adequate ventilation around the LED strip to prevent overheating, which can reduce its lifespan.
- Handling: Avoid bending the strip sharply or applying excessive force, as this can damage the internal components.
3. Package Contents
Verify that all components are present and undamaged upon unpacking:
- Hafele Loox5 LED 2060 Strip Light (16.4 ft / 5 m roll)
- Self-adhesive backing
- Lead cable (78 3/4 inches / 2 m)
Note: A 12V power driver is required for operation and is sold separately.
4. Specifications
| Feature | Specification |
|---|---|
| Model | Loox5 LED 2060 |
| Internal Model Number | 7f249720-1a80-4e0a-9119-f48376e732e9 |
| Voltage | 12 Volts DC |
| Wattage (per meter) | 4.8 W |
| Total Wattage (16.4 ft / 5 m) | 24 Watts |
| LEDs per Meter | 120 |
| Light Color | Cool White |
| Color Temperature | 4000 Kelvin |
| Color Rendering Index (CRI) | >90 |
| Dimmable | Yes |
| Lifespan (L80/B10) | >50,000 hours |
| Width | 3/16 inches (5 mm) |
| Length | 16.4 ft (5 m) |
| Cuttable Intervals | Every 1 inch (25 mm) |
| IP Code | IP20 (Indoor Use Only) |
| Mounting | Self-adhesive |
| Certifications | UL Certified, Title 24 Compliant |
| Material | Vinyl, Metal, PCB |
| Control Method | App Control (with compatible driver/controller) |
5. Setup & Installation
Careful planning and execution are crucial for optimal performance and longevity of your LED strip light.
- Plan Your Layout: Determine the exact path for your LED strip. Ensure the surface is clean, dry, and smooth for proper adhesion.
- Measure and Cut (if necessary): The LED strip can be shortened every 1 inch (25 mm) at the designated cut marks. Use sharp scissors to ensure a clean cut. Do not cut in any other location.
Figure 5.1: Technical diagram illustrating the dimensions of the LED strip and the precise locations where it can be safely cut. The diagram shows a width of 5mm and indicates cutting points every 25mm (1 inch). - Connect to 12V Driver: Connect the 2-meter lead cable from the LED strip to a compatible 12V DC power driver (not included). Ensure polarity is correct (positive to positive, negative to negative).
- Test Before Adhesion: Before removing the adhesive backing, temporarily connect the LED strip to the 12V driver and power it on to ensure it functions correctly.
- Adhere the Strip: Once tested, peel off the protective film from the self-adhesive backing. Carefully press the LED strip onto the desired surface, applying firm, even pressure along its entire length. Avoid repositioning the strip multiple times, as this can weaken the adhesive.
- Secure Connections: Ensure all electrical connections are secure and insulated to prevent short circuits.
6. Operation
The Hafele Loox5 LED 2060 Strip Light is designed for straightforward operation once properly installed with a compatible 12V driver and controller.
- Power On/Off: Control the power to the LED strip via the connected 12V driver or its associated switch/controller.
- Dimming: This LED strip is dimmable. If connected to a compatible dimmable 12V driver and controller (e.g., an app-controlled system), you can adjust the brightness level according to your preference.
- Light Color: The strip emits a Cool White light at 4000 Kelvin. This color temperature is fixed and cannot be changed.
7. Maintenance
The Hafele Loox5 LED 2060 Strip Light requires minimal maintenance to ensure its long-term performance.
- Cleaning: Periodically wipe the surface of the LED strip with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the LEDs or the strip's components. Ensure the power is off before cleaning.
- Inspection: Regularly inspect the strip for any signs of damage, loose connections, or adhesive failure. Address any issues promptly to prevent further problems.
- Environment: Maintain a stable indoor environment, avoiding extreme temperatures or high humidity, which can negatively impact the lifespan of the LEDs.
8. Troubleshooting
If you encounter issues with your LED strip light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED strip does not light up. | No power to the driver. Incorrect wiring/polarity. Faulty 12V driver. Damaged LED strip. | Check power supply to the driver. Verify all connections and polarity. Test the driver with another 12V load if possible. Inspect the strip for visible damage, especially at cut points. |
| Section of the LED strip is not lighting up. | Damage to that section. Improper cut. | Inspect the non-working section for physical damage or a faulty connection point. Ensure cuts were made only at designated marks. |
| LED strip flickers or dims inconsistently. | Loose connection. Incompatible or faulty dimmer/controller. Insufficient power from driver. | Check all electrical connections. Ensure the dimmer/controller is compatible with 12V LED strips and is functioning correctly. Verify the 12V driver has sufficient wattage for the entire strip length. |
| Adhesive is not holding. | Surface not clean/dry. Surface too porous or textured. Adhesive weakened by repositioning. | Ensure surface is thoroughly cleaned and dried before application. Consider using additional mounting clips or a stronger adhesive if the surface is unsuitable. |
9. Support
For further assistance, technical support, or inquiries regarding your Hafele Loox5 LED 2060 Strip Light, please contact Hafele customer service or visit the official Hafele website.
Hafele Website: www.hafele.com
