Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your mDesign Poppon Collection Plastic Adhesive Mount Storage Organizer Container. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
The mDesign Poppon Collection organizer is designed to provide a space-saving storage solution for various items in your kitchen, pantry, or other areas. Its adhesive mount feature allows for easy installation without the need for tools or drilling.
Product Overview
The mDesign Poppon Collection storage organizer is a versatile container made from durable plastic. It features a simple, modern design and is intended for wall-mounted use via an adhesive backing. This product is typically sold in a 2-pack.
Image Description: A white plastic storage organizer shown with its dimensions labeled. The organizer measures approximately 3 inches (7.6 cm) in length, 5.88 inches (14.9 cm) in width, and 5 inches (12.7 cm) in height. The mDesign logo is visible in the top right corner.
Key Features:
- Material: Durable Plastic
- Mounting Type: Adhesive Wall Mount
- Dimensions: Approximately 3" L x 5.88" W x 5" H (7.6 cm x 14.9 cm x 12.7 cm)
- Color: White
- Special Features: Lightweight, Portable
Setup and Installation
Follow these steps for proper installation of your adhesive mount storage organizer:
- Clean the Surface: Ensure the desired mounting surface is clean, dry, and smooth. Avoid porous or textured surfaces.
- Prepare the Adhesive: Carefully peel off the protective backing from the adhesive strip located on the back of the organizer.
- Position and Press: Align the organizer in the desired position on the clean surface. Press firmly against the surface for at least 30 seconds to ensure strong adhesion.
- Allow to Set: For optimal adhesion, allow the adhesive to set for 24 hours before placing items inside the organizer. This ensures maximum holding strength.
Image Description: A close-up view of hands carefully peeling the white protective paper from a vertical adhesive strip located on the side of a white plastic storage organizer. This illustrates the preparation step for mounting.
Note: The adhesive is designed for a strong, permanent bond. Repositioning after initial application may reduce its effectiveness.
Usage
The mDesign Poppon Collection organizer is suitable for a variety of storage needs. Here are some common applications:
- Kitchen Storage: Ideal for holding sandwich bags, foil, plastic wrap, small spice packets, coffee pods, or other kitchen essentials.
- Pantry Organization: Organize small snack bags, seasoning packets, or other pantry staples.
- Utensil Holder: Can be used to store cutlery or cooking utensils, keeping them easily accessible.
- Bathroom or Office: Suitable for small toiletries, office supplies, or craft items.
Image Description: A white plastic storage organizer shown from a slightly elevated angle, containing several boxes of plastic sandwich bags and plastic wrap. The items are neatly arranged within the container.
Image Description: A white plastic storage organizer filled with multiple individual packets of coffee or hot cocoa. The packets are standing upright, showcasing the organizer's capacity for small, loose items.
Image Description: A white plastic storage organizer containing a collection of silverware, including forks, spoons, and knives. The utensils are standing upright, demonstrating its use as a cutlery holder.
Avoid overloading the organizer to maintain adhesive integrity and prevent detachment.
Maintenance
To keep your mDesign storage organizer clean and in good condition:
- Cleaning: Wipe the organizer with a soft, damp cloth and mild soap.
- Drying: Dry thoroughly with a clean cloth after cleaning.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, scourers, or harsh chemical solvents, as these can damage the plastic surface.
Troubleshooting
Organizer Detaches from Surface:
- Insufficient Surface Preparation: Ensure the surface was thoroughly cleaned and dried before application. Any dust, grease, or moisture can prevent proper adhesion.
- Surface Type: Adhesive mounts work best on smooth, non-porous surfaces like tile, glass, or finished wood. They may not adhere well to painted drywall, wallpaper, or textured surfaces.
- Overloading: The organizer may have been overloaded beyond its capacity. Remove some items to reduce weight.
- Insufficient Setting Time: Ensure the adhesive was allowed to set for the recommended 24 hours before placing items inside.
- Temperature: Extreme temperatures or humidity during installation can affect adhesive performance.
If the adhesive fails, it may be necessary to replace the adhesive strip with a new, strong adhesive suitable for the intended surface and weight.
Specifications
| Attribute | Detail |
|---|---|
| Brand | mDesign |
| Model Number | 18143MDK |
| Material | Plastic |
| Color | White |
| Product Dimensions | 3" L x 5.88" W x 5" H (7.6 cm x 14.9 cm x 12.7 cm) |
| Item Weight | Approximately 14.4 ounces (0.41 Kilograms) per 2-pack |
| Mounting Type | Adhesive (In Wall) |
| Unit Count | 2 Count |
| UPC | 192173181430 |
Warranty and Support
Specific warranty information for this product is not provided in the available data. For any product-related inquiries, support, or warranty claims, please contact mDesign customer service directly through their official website or the retailer from whom the product was purchased.
Please retain your proof of purchase for any potential warranty claims.
